Best Hdiwousp Digital To Analog Signal Converters in 2026

PROZOR 192KHz Digital to Analog Audio Converter: Converts coaxial or toslink digital PCM audio signals to analog L/R RCA and 3.5mm Jack audio simultaneously ( not capable of being reversed)

Input Audio Connector: 1 x Toslink, 1 x RCA (Coaxial); Output Audio Connector: 2 x RCA(R/L), 1 x 3.5mm Jack; Powered by 5.5mm USB Power Cable (Power Adapter is NOT Included); Do Not Use Other Plugs, It Can Only Use 5V 1A Plug

Up to 192KHz/24bit: Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz, 96KHz, 192KHz; 24bit S/ PDIF Incoming Bit Stream on Left and Right Channels

Convert Your Old Video Tapes or Camcorder Tapes to Digital Format With The Touch of a Button (Recording Resolution: SD 720x480 Pixels. Not Intended For Modern HD Video Sources.)

Record and Digitalize Video From VHS, VCR's, DVD Players, DVR's, Camcorders, Hi8, & Retro Gaming Systems (VIDEO SOURCE NOT INCLUDED; DOES NOT PLAY VIDEO TAPES)

No Computer or Software Required - Just Hook It Up & Start Recording - Records Videos Directly Onto USB Flash Drive or SD Card (NOT INCLUDED; 512 GB or less)

🎵【Digital to Analog Audio Converter】Seamlessly convert optical/coaxial digital audio signal to stereo RCA (L/R) and 3.5mm jack analog audio signals simultaneously (CANNOT be reversed). A simple and great way to connect the newer TV to an older receiver/ amplifier and headphones.

🎵【Clear and Pure Sound】Adopted Anti-Interference and electronic noise reduction technology, this optical to RCA converter yields crystal clear sound with no delay, no static or distortion. The noticeably better sound quality heightens the overall listening experience.

🎵【192kHz Sampling Rate】Supports Sampling Rate at 32, 44. 1, 48, 96, and 192 kHz; 24-bit S/PDIF Incoming Bit Stream on Left and Right Channels. This aluminum optical to RCA converter gets your surround sound system operational which saves you from buying another one.

Ultra low jitter and high fidelity design using new receiver & D/A converter chip. Converts coaxial or toslink digital PCM/ LPCM audio signals to analog L/ R RCA and 3.5mm Jack audio simultaneously. Note：When connected to the Toslink and Coaxial cables at the same time, converter will give priority to Toslink input.

Input Audio Connector: 1xToslink,1xRCA (Coaxial); Output Audio Connector: 2 x RCA(R/L), 1x3.5mm Jack; Powered by 5V/1A Power Adapter.(NOTE: Do Not Use Other Plugs, It Can Only Use 5V/1A Plug)

Supports sample rates including 32KHz, 44.1KHz, 48KHz and 96KHz; 24-bit SPDIF Incoming Bit Stream on Left and Right Channels.(NOTE: Do not support 192kHz sample rate audio)

【Digital to Analog】 Rybozen DAC audio converter is designed for converting coaxial or toslink digital PCM audio signals to analog L/R RCA and 3.5mm Jack audio simultaneously. ( Not support Analog to Digital)

【Excellent Performance】The sound of the digital to analog audio adapter is synchronized when connected, without delay. The durable and stable transmission makes you do not have to worry about poor sound quality after long-term use.

【Wide Compatibility】 The signal converter supports sampling rate at 32KHz, 44.1KHz, 48KHz, 96KHz, 192KHz and 24-bit SPDIF Incoming Bit Stream on left and right Channels. It can be used for PS3, PS4, Xbox, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, etc.

Digital to Analog Audio Converter: Converts coaxial or toslink digital PCM audio signals to analog L/R RCA audio ( NOT capable of being reversed)Note: Some products have updated the remote control, the remote control does not have AAA batteries and needs to be configured by yourself

Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz, 96KHz and 192KHz; 24-bit S/ PDIF Incoming Bit Stream on Left and Right Channels, Support speakers and headphones play simultaneously. Make sure your TV audio OUTPUT setting is changed from TV speaker to "External Speaker" or "External Speaker(optical)

Support REMOTE Control: With IR wireless remote control, easily adjust volume/ choose coaxial or toslink input/ Mute/Power ON or OFF by using the IR wireless remote, no need to leave the comfortable couch; In order to received signal better PLEASE make sure the remote is FACING the infrared IR indicator on the converter.

【Updated DAC Converter】Our converter made of aluminium alloy material has Anti-Interference functionalloy, more stable in transmission and does not generate Heat, making it more durable and extended service life. Good Anti-Interference function makes the sound pure and clear. Aluminum Alloy Case, lightweight, durable and heat-resisted.

【Support Optical to 3.5mm】Can work with PS3, Xbox, Blu Ray Players, DVD, Home Cinema Systems, and more devices which lack RCA L/R or 3.5mm jack outputs. Not compatible with 5.1 channel signals such as Dolby AC3.

【Simple Plug & Play】DAC adapter comes with an optical cable and a coaxial cable transmitting digital or analog signals respectively. Easy to install and use, the sound is synchronized when connected, without delay. Durable and stable transmission, no worry about poor sound quality after prolonged use. Power supplied via USB micro cable (5V 1A), which can be connected to most 5V USB Plug.

【Analog to Digital Converter】 Convert R / L RCA or 3.5mm Jack analog stereo audio signal into digital coaxial audio and Toslink Spdif Optical digital audio at the same time. ▲ Note: This is not a digital-to-analog audio converter.

【8-96KHz Sampling Rate】Support uncompressed 2-channel LPCM digital audio signal output, and support 8-96 KHz output sampling rate. With the latest aluminum frame shell, it is more durable and provides better heat dissipation performance.

【Plug and Play】Easy to install and easy to operate. You only need to connect your analog-to-digital audio converter and power adapter to use. ▲ Note: Please select PCM / LPCM format on the TV, and then turn off the Dolby sound (eg Dolby Digital, DTS 5.1, Dolby-AC3).

【Upgraded DAC Converter】Converts Coaxial or Toslink digital PCM/ LPCM audio signals to analog L/ R RCA and 3.5mm Jack audio (✅Not capable of being reversed). Can be Used for PS3, PS4, Xbox, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, Etc

【Sampling Rate Achieved: 192KHz】Hdiwousp digital-to-analog signal converters actually Support sampling rate at 32, 44.1, 48, 96, and 192 kHz; 24-bit S/PDIF incoming bit stream on left and right channels, provides crystal clear electromagnetic noise-free transmission

【Plug and Play】Simple installation and easy operation, needn't install extra driver. In addition, the DAC adapter comes with an optical cable and a power adapter for transmitting digital and providing power respectively, everything is arranged for you! (✅ Please set PCM/LPCM audio format when using)

【Analog to Digital Audio Adapter】Converts R/L RCA analog stereo audio signal to Digital Coaxial audio and Toslink Spdif Optical digital audio simultaneously. Note: It’s not a Digital to Analog audio converter.

【Wide Compatibility】Compatible with devices with RCA plug or 3.5mm jack output, Simple installation and easy operation. No extral drive installation matter. Powered by USB Cable.Can be Used for PS3, PS4, Apple TV, Xbox, Blu-ray Player, HD DVD, AV Amps, etc.

【Note】1.Please choose PCM/LPCM on your TV. 2.Please shut off Dolby during use. 3. The cable and the interface must be tightly connected. Loose cables often cause the product to fail to work.

【Digital-to-Analog Audio Converter】Ideal DAC converter converts Coaxial or Toslink digital audio signals to analog L/R RCA and 3.5mm jack audio simultaneously ✅ NOT CAPALE OF BEING REVERSED. Compatible with PS3, Xbox, Blu-ray players, HD DVD, Home Theater Systems, and other devices lacking RCA L/R or 3.5mm jack outputs

【Volume Adjustment Knob】This optical audio to RCA converter has a volume knob, so you can adjust the volume more easily. Also product cover by aluminum metal shell, which is lighter and more durable, with better heat dissipation

【Plug and Play】The digital audio to analog converter adapter are easy to install and use. It comes with an optical cable and a power adapter, so you don't need to worry about anything. ✅ Please remember to set the TV into PCM mode.

hdmi component converter HDMI input into analog YPbPr video and R/L audio + Coaxial audio signal output;Support digital Coaxial and R / L Stereo Audio output simultaneously/separately to amplifier without connecting HDTV/Monitor(Note: Reverse usage is not supported)

Support both up-scaling and down-scaling function Support 165MHz/1.65Gbps per channel (6.75Gbps all channel) bandwidth for HDMI Input; Support OSD (On-Screen Display) for input and output resolutions

Compliant with HDMI 1.3 Support HDCP 1.2,Compatible with DVI by a DVI-HDMI cable or connector (not included),Support Xbox/ PS3/ PS4/ Apple TV/ Roku/ Fire TV/ STB/ Blu-ray Players/ Game Console / DVD / Notebook and so on. (Note: If the HDMI version of the connected device is higher than 1.3, the converter will not receive the signal)

Convert Any Video Tape (VHS) To DVD or Digital MP4/MOV Video File (mportant Note: A fully functional VCR or camcorder is required.)

Included: USB Video Capture Device, 3-RCA to 3-RCA Cable, Digital Software License, & Step-By-Step Instructions for PC/Mac

No Drivers Required - ClearClick USB Video Capture Device Automatically Installs on Windows & Mac