Best Slider Dimmer Switches in 2026

Provides the best dimming performance for dimmable LED bulbs (compatible with 800+ bulbs for more specific details view technical specification below)

Also works with ALL incandescent and halogen bulbs

Works with up to 150 Watts of dimmable LED/CFL bulbs or 600 Watts of Incandescent/Halogen bulbs

Dimmer Switch - One (1) Dimmer Light Switch With Brushed Nickel Finish for Dimmable Lamps

Use - Replace a standard electric lightswitch with this light dimmer switch for use in single-pole and three-way applications featuring a low-profile paddle switch for on/off control and an ergonomic slider to precisely adjust light levels

Convenience - Locator light illuminates when the switch is off with a soft glow to spot the switch easily and the constant memory feature returns the lights to the previous level after a power failure

Tested on 1,000s of bulbs and dozens of brands for flicker-free dimming. For list of recommended bulbs view "Compatibility Chart"

Provides over 150 lighting levels so you can create the perfect light for any activity

Works with up to 150 Watts of dimmable LED/CFL bulbs or 600 Watts of Incandescent/Halogen bulbs

Tested on 1,000s of bulbs and dozens of brands for flicker-free dimming. For list of recommended bulbs view "Compatibility Chart"

Provides over 150 lighting levels so you can create the perfect light for any activity

Works with up to 150 Watts of dimmable LED/CFL bulbs or 600 Watts of Incandescent/Halogen bulbs

Future proof to control a variety of dimmable CFL and LED lamps

Integrated linear full range slide control for easy, precise operation

Backwards compatible with incandescent lamps

Tested on 1, 000s of bulbs and dozens of brands for flicker-free dimming. For list of recommended bulbs view "Technical Specification"

Provides over 250 lighting levels so you can create the perfect light for any activity

Works with up to 150 Watts of dimmable LED/CFL bulbs or 600 Watts of Incandescent/Halogen bulbs

Support single pole or 3-way applications, decor wall plate included. Only one dimmer switch can be installed per 3 way circuit

LED Dimmer Light Switch: Provides the best dimming performance for LED bulbs. Simple and elegant horizontal slider dims and brightens with ease for full range light control

Adjuster Dial: Ensures compatibility with almost all dimmable LED, CFL, incandescent and halogen bulbs, up to 150 watts of dimmable LED/CFL lamps or 600 watts of incandescent bulbs, min. Load for LED lights: 3W

Pack of 2 Dimmers, UL Listed

120VAC, 60Hz

600W max Incandescent; 150W max Dimmable LED/CFL

3-Way and Single Pole Compatible - Horizontal Slide control dimmer - Almond

600W max Incandescent; 150W max Dimmable LED/CFL,120VAC, 60Hz

Works with LED, Halogen, Incandescent bulbs - Trim Dial below Cover Plate allows Sensitivity Adjustment upon installation to achieve compatibility with LED Lamps

Tested on 1,000s of bulbs and dozens of brands for flicker-free dimming. For list of recommended bulbs view "Compatibility Chart"

Provides over 250 lighting levels so you can create the perfect light for any activity

Works with up to 250 Watts of dimmable LED/CFL bulbs or 600 Watts of Incandescent/Halogen bulbs

UPGRADE YOUR SWITCHES: Get rid of your ordinary switch to a dimmer with on/off rocker switch and separate slider for dimming. 3-way; control one light from two locations. For use with incandescent and halogen bulbs.

CONSTANT MEMORY: Returns lights to previous level after a power failure

EASY LOCATION IN THE DARK: Subtle white LED glows when dimmer is OFF

✅【Digital Dimmer Switch】 MCU integrated digital circuit control technology enables smooth dimming of the widest range of LEDs with high consistency, high compatibility and changeable dimming curve.

✅【 Universal Compatibility 】 Works with dimmable LED/CFL rated up to 300W, Incandescent & Halogen light lamp bulbs rated up to 600W on the market. Works with 99% of dimmable LED, CFL, Incandescent & Halogen light lamp bulbs.

✅【Easy to Install】 NO NEUTRAL WIRE REQUIRED - ideal for homes of all ages. Replace the existing switch or dimmer in as little as 15 minutes. Ultra-slim profile easily fits in electrical box and wall plate. Rational design for comfortable and intuitive control.

Easy to install in a 120V single-pole or 3-way circuit. Wallplate included. Only 1 dimmer switch can be installed per 3 way circuit

Compatible with max 150W dimmable LED, CFL and 600W halogen & incandescent light bulb, min. Load for LED lights: 3W

Rotating the side adjuster can adjust the dimming range and eliminate buzzing or flickering

Adjust fan speed and light level from the same wall switch; compatible with dimmable LED, incandescent, and halogen lights; designed for 3-speed mechanical fans with pull string control

Dual slide controls; fan slider features 3 speeds (not for variable type fans or remote controlled); light slider provides full-range of dimming with a noticeable clicking sound when slid into the OFF position

Made of Polycarbonate Thermoplastic (PCT) material to provide the durability and resilience needed to withstand hard impacts and heavy force; heat & fade resistance to temperatures over 100° to prevent discoloration; flammability UL94; V2 rating

Provides the best dimming performance for LED bulbs. Simple and elegant horizontal slider dims and brightens with ease for full range light control

Adjuster Dial: Ensures compatibility with almost all dimmable LED, CFL, incandescent and halogen bulbs, up to 150 watts of dimmable LED/CFL lamps or 600 watts of incandescent bulbs, min. Load for LED lights: 3W

Smart Rocker: ON/OFF rocker switch remembers the last dimmed light setting and turns on to that exact light level

Works in single pole applications, where lights are controlled from one switch

Requires neutral wire connection

Rocker switch turns light on and off

Dimmer Compatibility - 3-Way and Single Pole compatibility makes this Vertical Slide Control an easy addition for your LED and incandescent dimming needs.

LED Dimming Capacity - 120-277VAC; Max Wattage: 960W at 120VAC, 1200W at 277VAC, 60Hx

Commercial Applications - Works with LED and low voltage applications for 0-10V dimming like Troffer Fixtures and Commercial Downlights.

Dim LED lights to create the perfect ambiance with the Kalide dimmer wall switch; supported by major-brand light bulbs from GE, Cree, Philips, Sylvania, Lithonia, Hyperikon, Amazon Basics, EcoSmart, and more; not compatible with smart lighting fixtures

Features an easy-to-use slider for full-range dimming; to turn the light OFF, move the slider all the way down until it clicks

Side dial allows for user-friendly fine-tuning controls; adjust the lowest dimming level to stop light bulbs from flickering

INNOVATIVE Designed to dim LED bulbs; For the best bulb pairings, refer to the “comparison chart” in the technical specification section below

ADVANCED; Adjustment switch to modify the minimum light level in order to maximize the dimming range if flickering occurs at lower dimming levels

FLEXIBLE; Can be used in a single pole or 3 way installation (with a 3 way switch, sold separately); No neutral wire required for installation

12 Volt Dimmer Switch Is Available in Turn, Slider, and Large Slider Styles

12 Volt DC Dimmer. Dims up to 60 watts (4.2 amps) of incandescent, halogen, or LED lighting reducing heat and power drain on batteries

Commonly used for lights in RVs, Buses, Horse Trailer Conversions, Haulers, Travel Trailers, Boats and anywhere 12 volt DC power is present. Fits in small spaces.

✅【Digital Dimmer Switch】 MCU integrated digital circuit control technology enables smooth dimming of the widest range of LEDs with high consistency, high compatibility and changeable dimming curve.

✅【Easy to Install】 NO NEUTRAL WIRE REQUIRED - ideal for homes of all ages. Replace the existing switch or dimmer in as little as 15 minutes. Ultra-slim profile easily fits in electrical box and wall plate. Rational design for comfortable and intuitive control.

✅【Universal Compatibility】 Works with 150W dimmable LED, 150W CFL and 600W incandescent light bulbs on the market. Set optimal dimming range for different bulbs with the initial brightness controller.

【 LED Compatible Dimmer 】 Inline light dimmer switch works with up to 100 watt dimmable LED / CFL bulbs or 500 watt Incandescent; 110 - 120Vac Input Voltage; 5 ft extension cord allows you to place the lamp dimmer in an easy-to-reach area

【 Foot Slide Full Range Dimming 】 Smooth foot slider switch slides up to brighten, down to dim gradually through a full range of stepless dimming; slides into the off position to turn the power off completely; the anti-slip pads on the bottom prevent it from sliding during the dimming process

【 Adjustable Dimming Range 】 Adjust the dimming range for LEDs and CFLs with the SET switch and indicator light; set your most comfortable brightness range; prevent the lamp from flickering at low voltage effectively; save energy and extend bulb life; protect your eyes from overly bright lights

10 pack white 0-10V low voltage LED dimmer switch, 5%-100% dimming ability, provide the best dimming performance for dimmable LED lights.

For use with up to 150 Watts of dimmable LED/CFL and up to 600 Watts of Incandescent and Halogen lamps.

Features a large rocker paddle to turn lights on/off or to preset level and a fluent slider to brighten/dim lights to suit different activities.

Control – Dim and brighten the room as you wish with the easy slide dimmer that allows for full light range control

Sleek – White color looks clean and elegant and will look attractive in any home

Multi-Function – Use with both single pole (light controlled by one switch) and three-way applications (light controlled by one or two switches)

Rated #1 LED Dimmer Switch for LED Lights. Use with 150-watt dimmable LED bulbs for the best results.

3 Way Dimmer Switch - Use to control one or more lights or fixtures from multiple locations, such as the top and bottom of a flight of stairs.

Single Pole Light Switch - Most commonly used in home lighting circuits to control one or more lights or fixtures from a single location, such as the entrance to a room

LED Dimmer Switch: Simple and elegant horizontal slider dims and brightens with ease for full range light control. Conveniently control your lights, and save energy. Ideal for your home and office use.

Adjuster Dial: Ensures compatibility for almost all dimmable LED, CFL, and incandescent or halogen bulbs, up to 150 watts of dimmable LED/CFL lamps or 600 watts of incandescent bulbs, min. Load for LED lights: 3W

Smart Switch: ON/OFF rocker switch remembers the last dimmed light setting and turns on to that exact light level

FULL RANGE DIMMING: Dim and turn off your bedside or floor lamp with this lamp dimmer. Simply slide switch with foot for full-range dimming.

300W MAX POWER DIMMER: The plug-in light dimmer works with incandescent and halogen bulbs. Make sure your lights are dimmable and the total power of the lights is less than 300W.

ENERGY SAVINGS: Save some cash and energy by reducing the light level with this light dimmer switch. Easy to control mood lighting for bedroom, nursery room, holidays, and so on

Versatile Full Range Dimmer: Featuring 0%-100% full range brightness, the rotary dimmer switch will be a valuable device for those who want to turn regular lamps to dimming lamps. Handy to operate, inline switch will be a perfect solution for your broken lamp switch, saves your budget to search a new lamp.

Wide Application: The inline cord switch works great with dimmable LED, CFL (2W-25W), incandescent and halogen bulb (5W-80W). You could use the dimmer with table lamps, floor lamps or pendant lights. Rotate the dimming button to customize the brightness, and create an optimal atmosphere in your room!

Simple Installation: Installation guide and video provided on the product page. No electrical knowledge required at all. Just cut the cord and strip off a little plastic insulation. Insert each stripped end into the wire channel and clamp the wire with screw. Whole installation process will be finished within 5 minutes.

For magnetic low-voltage applications

Discreet slider adjusts light level

Fits large designer wall plate opening

【Single Pole & 3 Way】This slide dimmer switch can be used in single pole or 3-way applications, satisfying all your requirements. REMINDER: Please use ONLY ONE dimmer in a three way circuit, the other three way switch will turn the light on at the brightness level selected at the dimmer.

【Universal Compatiblity】Compatibility with incandescent light bulb 600W, dimmerable CFL 150W, dimmerable LED 150W. Adjustable initial brightness setting for different type of lights, and preset the minimum brightness of the light.

【Full dimming range】The wall-mounted dimming switch provides a range from off to full brightness and every level in between. The smooth vertical sliding control allows you to find the right brightness with just one swipe, allowing anyone to adjust the lighting on the wall at any time.