Best Wired Door Bell Push Buttons in 2026

Oil Rubbed Bronze Finish

Metal, Lighted, Surface Mount

Dimensions: 0.75" w x 0.625" d x 2.75" h

Simple unlighted surface mount doorbell push button switch can be used on stucco or wood surfaces

Doorbell buttons wired with rectangular plastic housing, bell wire is not included

If using as replacement door bell button, drilling may not be required

Included in Package – 1 plug-in receiver (150ft. range) and 2 push buttons with 2 CR2032 batteries and mounting hardware.

Melody Selection – Choose from 4 different volume options and 8 different melodies, including ding dong, fanfare, good vibes, knocks, Mozart, patriotic, tango and Westminster.

Easy Installation – The doorbell receiver plugs into a wall outlet, and the push buttons come with mounting instructions.

Choose from 11 pre-installed tunes or use the included USB cord to download your own MP3 files.

The Series 9 Doorbell has a wireless range of 450 feet that allows you to take the doorbell with you to the basement, backyard or as far away from the sleeping baby as possible.

The volume can be adjusted up to 90 decibels or muted with the option to set notifications to visual lighting alerts only.

Flush Mount brass wired push button in brushed nickel finish

Illuminating lighted pushbutton allows your guests to easily locate doorbell

8v-16v door chime button operation

Wired Doorbell Button. Lighted push button - illuminates button only, does not illuminate the entryway/doorway.

Includes doorbell button, mounting screws and installation instructions (chime not included)

Cast in durable polyresin. Recommended for use with 12-16 volt transformers.

SUPERIOR QUALITY DECORATIVE DOORBELL BUTTON - Add quality and style to your entryway with this antique doorbell button. It is the perfect choice for your vintage deco or mid-century home.

PRODUCT DIMENSIONS - Height: 3 3/4" , Width: 1 5/8"

WIRED DOORBELL PUSH BUTTON - This electric door bell button is designed to operate a standard door chime located within a home. The chime is not included (available at most home improvement stores) and must be hardwired into the wall. It is compatible with existing two-wire electrical systems.

SUPERIOR QUALITY DECORATIVE DOORBELL BUTTON - Add quality and style to your entryway with this antique doorbell button. It is the perfect choice for your vintage deco or mid-century home. It features a vintage detailing and a distinctive Antique Brass finish.

PRODUCT DIMENSIONS – Length: 1-1/2" x Height: 3-1/8"

WIRED DOORBELL PUSH BUTTON - This electric door bell button is designed to operate a standard door chime located within a home. The chime is not included (available at most home improvement stores) and must be hardwired into the wall. It is compatible with existing two-wire electrical systems.

Lighted pushbutton

Polished Brass stucco finish

Model number PB41LBGL

Lighted Wall Mounted Doorbell Button: the lighted doorbell button switch can be applied on cement or wood surfaces, easy to find in the dark, bring convenience to you at night too

Power Saving: low voltage hardwired door bell ringer button, save electricity for you

Specification: the wired doorbell button is approx. 2.8 x 0.86 x 0.59 inches/ 7.2 x 2.2 x 1.5 cm (length x width x height), with 2 screws and easy to install (wires not included

Do-It-Yourself – This doorbell button is easy to install and ready to use with the included instructions

Repair and Replace – Perfect for replacing old, worn out or broken doorbells in your home

Compatibility – This push button works with all standard direct wire doorbell brands

⭐ 【 No Batteries Required 】 - You will get one self powered push button and two plug in receivers, after pressing the push button, it will generate electricity by itself and send a stable signal to the receiver, you will no longer worry about frequent battery replacement, you will no longer worry about when the battery will run out. Our wireless doorbells are great use for instance on a side porch area or added to a security door.

⭐ 【 Work Out of Box 】 - No batteries, and there is no need for wiring or electrician installation when using it since its installation can be completed within 1 minutes: plug the receiver into the socket, ready to go. The wireless door bell does not block the other outlets at all, and is a little box that plugs into any electrical outlet. The door bell chime kit retains last setting after a power outage.

⭐ 【 Long Range 】 - Linptech wireless doorbells for home have passed the CE, RoHS, FCC Certified, which has strong anti-interference features and one-to-one signal pairing. No need to worry about signal connecting wrongly with the next door. Door bell ringer wireless is able to operate properly within a range of 300ft, and the sensing distance can reach up to 500 Ft in obstacle-free environment.

The product is easy to use

The product is manufactured in china

The product is highly durable

MATERIAL- Our wired round push button doorbell is made of Solid Brass and polished with tarnish resistant glossy Chrome finish. Create a great first impression with beautiful curb appeal. It withstands weather elements for many years.

TRADITIONAL ROUND BELL- Simple and elegant Round bevelled Pushbutton door bell with an embossed PRESS design in Chrome finish and Traditional Chime is a perfect accent to your existing colonial door hardware.

IDEAL SIZE - Diameter = 2.5 Inches, Projection = 1.25 Inches - Perfect front door ringer size for home!

SUPERIOR QUALITY DECORATIVE DOORBELL BUTTON - Add quality and style to your entryway with this antique doorbell button. It is the perfect choice for your vintage deco or mid-century home. It features a vintage detailing and a distinctive Black Powder Coat finish.

PRODUCT DIMENSIONS – Height 2 1/2 inch Length 2 1/2 inch width 1/2 inch

Heavy Cast Iron Exclusive Black powder Coat -By-Hand Finish

[Package Contation] – 1 brand new garage doorbell button, approximately: 2.8*0.7*0.7 inches, two 1.5-inch long screws, two 1-inch short screws, and 1 operating manual.

[Compatibility] – You no longer need to worry about the failure of the old garage doorbell switch button, We will provide you with the best solution. Universal wall-mounted buttons are suitable for most low-voltage bell systems and are a good substitute for your old garage door opener switch.

[Light Included] – After installation, the soft green light button will provide visibility after dark, so visitors are never left searching for the doorbell button.

Lighted pushbutton

Antique Brass finish

Fits brick molding; Most brick molding has a minimum flat of 1-1/8-Inch

Modern and Minimalist Stainless Steel Doorbell Design

4mm. thickness

304 grade Stainless Steel

Hammered Black Finish

Plastic

LED lighted

COMPATIBILITY：The doorbell angle mount is designed for Ring Video Doorbell Pro 2/Pro. Cannot be used for Ring Video Doorbell Wired(NO Camera).

ADJUSTMENT ANGLE: The adjuster can be adjusted at an angle of 30°-60°, so that the video doorbell camera can better observe visitors and things in front of the door.

WATERPROOF DESIGN: The waterproof doorbell mounting bracket design prevents rainwater from splashing on the camera and blurring the line of sight. The waterproof cap design on the regulator prevents water accumulation.

One unlighted pushbutton

White finish

Fits brick molding; Most brick molding has a minimum flat of 1-1/8-Inch

Decorative Flush Mount Door Bell Ringer Button In A Durable Solid Brass Finish

Easy To Install Doorbell Button Replacement For Wired Chimes & Bells

Door Bell Push Button With Light Provides Ample Visibility For Guests

Ideal Replacement: has your doorbell been in use for years; Is it old, worn or discolored; Replace it with this doorbell button and let it continue to work for you

Widely Fit: this doorbell replacement button is a standard size (0.63 inch hole) and is compatible with most doorbells; Nice adaptation and pretty well fit

Easy Installation: remove the old doorbell button and screw the other replacement on, it will only take a few minutes to easily install

A DOOR CHIME FOR BUSINESS WHEN ENTERING THAT YOU CAN HEAR IN THE LARGEST & NOSIEST LOCATIONS: 120db siren connects to 95db plug in receiver adjustable volume gives you control. Makes a great warehouse doorbell or door alert for business. Provides coverage in large areas & noisy locations you never thought possible - most applications can be covered with just one entry alert chime

A POWERFUL LONG RANGE WIRELESS DOORBELL SIGNAL THAT CAN GO THROUGH VIRTUALLY EVERYTHING: Wireless transmitter to plug in receiver field tested at up to 4000ft range capability with unparalleled signal prowess that can transmit through metal, reinforced concrete, stone, brick, wood - even multiple floors, unattached structures & buildings

PROVIDES COMPLETE COVERAGE IN THE MOST DEMANDING APPLICATIONS: This wireless door chime for business provides is expandable & easily configurable to add an unlimited number of transmitters & receivers. Receivers have (4) 12VDC outputs (1 per each of the 4 zones} allowing you to add 12VDC devices (sirens, buzzers, bells, strobes, etc). Transmitters feature (1) N/O, N/C relay & plug in receiver has (1) “C” relay

Vintage Decorative Doorbell Button – Add style to your entryway and bring it to life with Akatva bell push button that complements the vintage décor of your mid-century home, features antique detailing, replacement door bell that brings back the Victorian era charm – give your home a luxurious touch with this doorbell chime button!

Rustic Handmade Design – The doorbell push button is designed to operate a standard chime works with almost any transformer doorbell or wired chime, and can be used on all types of door/gates. This mid century doorbell button crafted by hand to perfection, this true illuminated doorbell button is the best pick of the lot.

Premium Quality and Superior Build – This wired doorbell button made from the finest and carefully sourced raw materials, The doorbell button features a high-quality and meticulously detailed exterior design.

[Power Saving]: Upgraded door bell button with light, more beautiful and more power saving than other doorbell replacement button switches; The green light is also easy to find in the dark

[Widely Applied]: Saillong doorbell button led green light is almost universal and suitable for low voltage chime systems, a good replacement for your old garage door opener switch or door bell switch

[Durable Material]: Made of a strong black doorbell cover, not easy to break and deform, the quality copper plate inside makes this door bell replacement button will surely last you for a long time without needing another replacement

Beautify your home entry with an updated door bell pushbutton

Bronze trim with white button

Simple Lighted surface mount doorbell push button switch can be used on most surfaces

[Easy to Install]: easily replace old broken wired doorbell buttons and garage door opener switch; Standard size: 2.8 x 0.87 x 0.59 inch (L x W x H), with 2 screws, spacing of screw holes is 2.2 inch; Tips: door bell button only, wires not included

[Widely Applied]: Saillong wired door bell ringer button is almost universal, suitable for low voltage door bells and chimes wired systems, and the best choice for doorbell button replacement

[Power Saving]: low voltage hardwired design saves more power, and the cute blue LED light makes it easy for guests to see the front door at night or during the day, never miss any visitors

Modern metal doorbell hardware built to last

Rustproof, waterproof, weatherproof

Made in Texas

Product: Controls a garage door opener.

Surface Mount Switch: Any garage door opener should use the illuminated wall button.

Power Saving: Low voltage hard-wired button, you can experience safety and more charm.