Best Metal Earphones in 2026

【Great 2.4GHz Band】2.4GHz wireless in-ear monitor system create your personal or team's monitor system. uncompressed wireless signal transmission, low noise and latency.Mono balanced XLR or mono unbalanced TS input.Provides smooth frequency response with any headphones.

【Less than 4.5ms Latency】Simultaneous broadcasts on 6 channels no-interference, Less than 4.5ms Latency(normal),Up to 107 dB signal-to-noise ratio provides clear, detailed audio at any volume. High Resolution 24-bit/48kbps audio. Broad 20Hz-20KHz frequency response，Dynamic Rang 107 dB.

【Efficient Power Circuit and Listening Effect】 Rechargeable Lithium Battery，7 hours of battery life(normal),comes with power cable,ensures great performance for your every show.Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch monitoring has the headphone jack.it can replace traditional complex sound monitoring equipment,achieve admirable listening effect.

WHOLE METAL UHF WIRELESS IN EAR MONITOR SYSTEM-UHF band Phase lock PLL,Among the band of 32MHz,the preset 40 frequencies can be arbitrary switching.

USED IN STAGE PERFORMANCE AND SOUND BROADCASE-Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch stereo monitoring has the headphone jack.Used in stage，it can replace traditional comples sound monitoring equipment,achieve admirable listening effect.

DESIGN FEATURES(APPERANCE AND DISPLAY)-Elegant liquid crystal display panel and LCD display low-battery indicator on the receiver.With power and RF receiving indecator lamp. It using two AA batteries and efficient power circuit,longservice time.The metall housing makes it sturdy and durable

【High-molecular composite silicon crystal biological diaphragm dynamic driver】TRI Starsea Hifi earbuds is absorbed in sound and adopts a lightweight, medium-rigidity, and elastic polymer composite silicon crystal biological diaphragm that contributes to a strong low-frequency burst, enhanced low-frequency dive depth, and a better low-frequency dynamics and transient performance

【2BA units present a wide dynamic range to capture subtle details of music】TRI Starsea wired earphone adopts one TRI-HI-A ultra-high frequency with outstanding responds and clear extension of high frequency and one Knowles ED-29689 three-frequencies balanced armature which can make vocal more clear, sweet,soft and natural.

【skin-friendly resin cavity】The earphone cavity is made of high-quality skin-friendly resin material specially imported from Germany, which is gentle and comfortable. There is no pressure and foreign body sensation even though worn for a long time.

WHOLE METAL UHF WIRELESS IN EAR MONITOR SYSTEM-UHF band Phase lock PLL,Among the band of 32MHz,the preset 40 frequencies can be arbitrary switching.

USED IN STAGE PERFORMANCE AND SOUND BROADCASE-Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch stereo monitoring has the headphone jack.Used in stage，it can replace traditional comples sound monitoring equipment,achieve admirable listening effect.

DESIGN FEATURES(APPERANCE AND DISPLAY)-Elegant liquid crystal display panel and LCD display low-battery indicator on the receiver.With power and RF receiving indecator lamp. It using two AA batteries and efficient power circuit,longservice time.The metall housing makes it sturdy and durable

UHF WIRELESS IN EAR MONITOR SYSTEM-UHF band Phase lock PLL,Improved comprehensive performance, anti-frequency drop, anti-series frequency. Frequency range: 550 MHz-580 Mhz. In the 32MHz frequency band, the preset 40 frequencies can be switched at will. The dynamic expansion circuit greatly improves the signal-to-noise ratio

USED IN STAGE PERFORMANCE AND SOUND BROADCASE-Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch stereo monitoring has the headphone jack.Used in stage，it can replace traditional comples sound monitoring equipment,achieve admirable listening effect

DESIGN FEATURES(APPERANCE AND DISPLAY)-Wireless in ear monitor system with elegant liquid crystal display panel and LCD display low-battery indicator on the receiver.With power and RF receiving indecator lamp. It using two AA batteries and efficient power circuit,longservice time.The metall housing makes it sturdy and durable.

【Great UHF Band】520-580Mhz wireless in-ear monitor system create your personal or team's monitor system. uncompressed wireless signal transmission, low noise and latency. Provides smooth frequency response with any headphones.

【Extensible Monitor system】 With one transmitter, no matter how many bodypack are added, the bodypack and transmitter can work properly as long as they have the same frequency. No quantity limit. Good quality earbuds provide pure sound and enhanced performance. It works perfectly in various sound-monitoring events, stage performance, studio recording, exhibit, lecture, instruction, speech, etc. The package also includes with standard rack unit.

【180 Feet Operation】 Using advanced circuit design, great chips, clear the receiving blind angle to make the system's receiving signal steady. Enables users to move freely with 160ft - 180ft operating distance in open space. the transmitter is made by tough metal material. It is the best choice of monitor product.

WHOLE METAL UHF WIRELESS IN EAR MONITOR SYSTEM-UHF band Phase lock PLL,Among the band of 32MHz,the preset 40 frequencies can be arbitrary switching.

USED IN STAGE PERFORMANCE AND SOUND BROADCASE-Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch stereo monitoring has the headphone jack.Used in stage，it can replace traditional comples sound monitoring equipment,achieve admirable listening effect.

DESIGN FEATURES(APPERANCE AND DISPLAY)-Elegant liquid crystal display panel and LCD display low-battery indicator on the receiver.With power and RF receiving indecator lamp. It using two AA batteries and efficient power circuit,longservice time.The metall housing makes it sturdy and durable

WHOLE METAL UHF WIRELESS IN EAR MONITOR SYSTEM-UHF band Phase lock PLL,Among the band of 32MHz,the preset 40 frequencies can be arbitrary switching.

USED IN STAGE PERFORMANCE AND SOUND BROADCASE-Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch stereo monitoring has the headphone jack.Used in stage，it can replace traditional comples sound monitoring equipment,achieve admirable listening effect.

DESIGN FEATURES(APPERANCE AND DISPLAY)-Elegant liquid crystal display panel and LCD display low-battery indicator on the receiver.With power and RF receiving indecator lamp. It using two AA batteries and efficient power circuit,longservice time.The metall housing makes it sturdy and durable

WIRELESS PERFORMANCE: This mono wireless in ear monitor system operates in UHF band with 50 selectable frequencies ( 6+ units can work together). NO LATENCY by utilizing UHF wide audio signal transmission. Wireless design for less clutter on stage, enables users to move freely with 140ft - 164ft operating distance in open space, line of sight. *For longer distance, please avoid thick walls, glass, and metal block

MONO DESIGN, SEPERATE OUTPUTS: Elegant sleek design with metal construction for transmitter base unit. Black carrying case for safe-keeping. Left and right inputs for personal audio mix with clear mono sound monitoring. The wireless IEM system also runs a left/right line out back to the soundboard or speaker. It allows original audio signal pass through the PTM-11 transmitter without being affected

SIMPLE SETUP WITH VERSATILE USE: Simple setup with uninterrupted frequency to optimize sound performance for this personal monitor system. Good quality earbuds provide pure sound and enhanced performance. The UHF in-ear monitor system works perfectly in various sound-monitoring events, stage performance, studio recording, exhibit, lecture, instruction, speech, etc. The package also includes necessary tools to work with standard rack unit

[UHF Band & Cable-Free Operation]: This mono wireless in ear monitor system utilizes the state-of-the-art UHF band circuitry for statistics-free and delay-free operation compared to the 2.4GHz design. Up to 2x50 adjustable frequencies enable interference-free multiset operation with 6+ IEM systems. Free you from wire entanglement with reliable coverage up to 164ft in an open space line of sight.

[Mono Monitoring & Hassle-Free Setup]: The UHF in ear monitor produces crystal-clear sound monitoring in mono mode and enables you to monitor overall sound harmony from various instruments and singers effectively, a beginner-friendly wireless in ears for singers and stage performances. The hassle-free IR synchronization to pair up transmitters and the receiver makes setup a piece of cake.

[Crystal-Clear Sound & Individual IN & OUT]: This wireless monitor system features 2 inputs and 2 outputs for each channel to enable two different mixes. You can choose pre-fader or post-fader monitoring by passing the audio through the IEM system. Volume controls and an informative LCD panel to provide system details, including real-time battery indicators, AF, and RF indicators. PAD buttons lower the input gain for a smoother mix.

WHOLE METAL UHF WIRELESS IN EAR MONITOR SYSTEM-UHF band Phase lock PLL,Among the band of 32MHz,the preset 40 frequencies can be arbitrary switching.

USED IN STAGE PERFORMANCE AND SOUND BROADCASE-Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch stereo monitoring has the headphone jack.Used in stage，it can replace traditional comples sound monitoring equipment,achieve admirable listening effect.

DESIGN FEATURES(APPERANCE AND DISPLAY)-Elegant liquid crystal display panel and LCD display low-battery indicator on the receiver.With power and RF receiving indecator lamp. It using two AA batteries and efficient power circuit,longservice time.The metall housing makes it sturdy and durable

SINGLE 10mm TITANIUM COATED DYNAMIC DRIVER - A powerful dynamic driver, elegantly crafted from titanium coated PEEK material, delivers powerful, fast and clear reference audio encompassing the full spectrum frequency range, empowering you to effortlessly hear every single detail.

2-PIN DETACHABLE OFC CABLE: A quad braided cable made from over 320 individual strands of 99.99% oxygen-free pure copper ensures a durable, natural and reliable audio conduction.

PROTECTIVE STORAGE CASE - Take your new CE110 monitors anywhere with the confidence they are well protected within your CTM monitor storage case.

WHOLE METAL UHF WIRELESS IN EAR MONITOR SYSTEM-UHF band Phase lock PLL,Among the band of 32MHz,the preset 40 frequencies can be arbitrary switching.

USED IN STAGE PERFORMANCE AND SOUND BROADCASE-Built-in Limiter circuitry eliminating distortion under excessive input levels. Front panel 1/4-inch stereo monitoring has the headphone jack.Used in stage，it can replace traditional comples sound monitoring equipment,achieve admirable listening effect.

DESIGN FEATURES(APPERANCE AND DISPLAY)-Elegant liquid crystal display panel and LCD display low-battery indicator on the receiver.With power and RF receiving indecator lamp. It using two AA batteries and efficient power circuit,longservice time.TThe metall housing makes it sturdy and durable

【KZ AS16 Pro 16-Unit BA Driver】 - AS16 Pro earbuds have 8 Balanced Armature units on one side, and the in-ear monitor headphones cover the highs mids and lows to maximize the restoration of the natural original sound, bringing you high-quality music.

【Exquisite craftsmanship design】- Sophisticated electronic frequency division,Highs with strong resolution and good extension.Mids makes vocals and instruments sound more clear.Lows brings mellow low frequency, with good dynamic performance.

【Silver-plated cable & Hd microphone】- AS16 Pro is equipped with high-purity silver-plated cable to reduce signal transmission loss, and high-definition microphone supports various usage scenarios for almost all devices with a compatible 3.5mm earphone jack.

【10mm Dual-Magnet Driver Gives More Energy To Your Music】FEDAI TRN CS2 dynamic driver adopts dual-magnet design. This newly-designed magnet increases magnetic flux by 55% - close to 1 Tesla. This resulted in an improvement in resolution, dynamics, and speed.

【Customed Tuning For Commercial Pop-Music】Impactful and dynamic bass, together with a clean, transparent midrange and an atmospheric, crystal-clear top-end. Brings your music enjoyment to the next level.

【Imported Polycarbonate Housing】Our highly experienced acoustic engineers start with a suitable Silicon crystal composite bio cellulose diaphragm for the driver. Follow by a painstaking process of tuning the internal chamber of the shell. We spare no expense in choosing the most suitable tin-silver soldering lead. Every step we do brings you closer to perfection. Your journey to audio excellence starts with CS2.

Xvive U4T9 Wireless IEM System,U4 Wireless IEM System with T9 Dual Balanced-Armature Drivers in-Ear Monitor Earphone

Dual Balanced-Armature Drivers-T9 IEM has carefully selected, and customized drivers designed to deliver full‐range, dynamic, tactile, and detailed audio, to be fun for music lovers, at home on stage and equally useful in the recording studio.

BASS,MID-HIGH Frequency-We took the industries' largest and most capable low frequency driver and paired it with a specially tuned and tweaked mid‐high driver to create a responsive and detailed sound signature

[Mono Monitoring & Hassle-Free Setup]: The UHF in ear monitor produces crystal-clear sound monitoring in mono mode and enables you to monitor overall sound harmony from various instruments and singers effectively, a beginner-friendly wireless in ears for singers and stage performances. The hassle-free IR synchronization to pair up transmitters and the receiver makes setup a piece of cake.

[UHF Band & Cable-Free Operation]: This mono wireless in ear monitor system utilizes the state-of-the-art UHF band circuitry for statistics-free and delay-free operation compared to the 2.4GHz design. Up to 2x50 adjustable frequencies enable interference-free multiset operation with 6+ IEM systems. Free you from wire entanglement with reliable coverage up to 164ft in an open space line of sight.

[Crystal-Clear Sound & Individual IN & OUT]: This wireless monitor system features 2 inputs and 2 outputs for each channel to enable two different mixes. You can choose pre-fader or post-fader monitoring by passing the audio through the IEM system. Volume controls and an informative LCD panel to provide system details, including real-time battery indicators, AF, and RF indicators. PAD buttons lower the input gain for a smoother mix.

[UHF Band & Cable-Free Operation]: The PTM-10 stereo wireless in-ear monitor system utilizes UHF band circuitry for statics-free and delay-free operation compared to the 2.4GHz design. Up to 89 selectable frequencies for better anti-interference ability and effective multiset operation (6+ IEM systems can be used simultaneously). Free you from cables on the stage and in the studio with reliable coverage of 140 - 164ft in an open space line of sight.

[Stereo Monitoring & High-Fidelity Sound]: Stereo monitoring recreates a live stage-like sound and enables users to hear everything clearly with the separation. This true stereo in-ear monitor system offers stereo/mono mode selection. Users can enjoy the full, dynamic, crystal-clear, and immersive stereo sound quality from this single-channel IEM system.

[Advanced Functions]: The metal-built transmitter has elegant and sleek design with informative LCD display. High-quality ABS plastic bodypack receivers are compact and portable. It features powerful functions, including Balance, Equalizer, Limiter, Lock functions, and stereo/mono selection. Such a powerful studio and stage monitor boasts its clean transmission to level up sound performance.

In Ear Monitor System (Transmitter + Receiver) with High Quality Metal Earphones

Zero Latency / Lossless 2.4Ghz Wireless Audio Transmission up to 90 feet

5 Hours Battery Life on both the Transmitter and Receiver

Stable Signal: The wireless earphone monitor system supports the preferred XLR loop out (true straight through), connecting the signal to a mixing console, additional IEM system or recording device without signal degradation.

Anti Interference: This studio monitoring system's adjustable squelch eliminates annoying static frequency guide sound and prevents RF interference when the transmitter is turned off. Portable system can be quickly loaded and set up.

High Performance: Professional stage ear monitor system reduces stage sound clutter for a better overall mix and less feedback. Use any number of stereo receivers on the same frequency (with separate mixes).

Professional: Up to 8 simultaneous systems per band, three receiver modes, individual mix, stereo and mono. Individual mix control allows control of the volume and mix of two separate signals at the receiver.

Working Principle: Wireless ear monitor system combines HiFi sound with a clear mix, allowing players to hear themselves clearly at lower volumes. Suitable for exhibition live broadcast listening, stage return monitoring.

Stable Signal: The wireless earphone monitor system supports the preferred XLR loop out (true straight through), connecting the signal to a mixing console, additional IEM system or recording device without signal degradation.