Best Maple Electric Guitar Necks in 2026

Roasted maple neck

“Flat Oval”-shaped profile; 12”-radius maple fingerboard

22 jumbo frets; synthetic bone nut

Roasted maple neck

“Modern C”-shaped profile; 9. 5”-radius maple fingerboard

21 narrow-tall frets; synthetic bone nut

Maple 22 Frets Fingerboard Bolt On for Music Lover Guitar Repair

Neck Wood: Maple

Finish: matt finish.

Bolt-on Neck Headless style electric guitar DIY Kits

Perfect Solid mahogany body and Maple Veneer

Maple and Mahogany neck,ebony fingerboard with 6mm pearl dot inlay

♪100% BRAND NEW: This electric guitar neck replacement is new and good for gibson les paul junior sg neck replacement.

♪DELUXE STYLISH APPEARENCE: Beautiful black gloss and white trapezoid inlay help us to distinguish the corresponding fret easily. The neck is perfectly straight and polished.

♪HIGH QUALITY WOOD: Neck is made of Maple Wood. Fretboard is made of Rosewood. These premium wood make the sound brighter and louder, ensuring outstanding sustain.

Mahogany wood Neck, rosewood Fretboard, Trapezoid White inlay

Truss rod at headstock, Nice Cut headstock , Normal nut, 42mm nut width

Set in style, White fretboard binding. 24.75 inch 22 fret.

Guitar Neck

Canada Maple 22 Fret Bolt On

composite ebony fingerboard

New Yinfente 24 Fret Electric Guitar Neck 42.5mm Nut Width , 56mm Heel Width

24 fret. 25.5 inch, Jackson headstock, Maple wood Neck, Maple/Rosewood Fretboard

Shark Tooth Inlay Floyd Rose Locking Nut , Truss Rod Installed At Headstock

Shaped, inlaid, fretted and finished—feels and plays great

Hard rock maple finished in clear satin polyurethane

Each neck has a single-action truss rod and traditional "skunk stripe" down the back

1.🎄Guitar Neck Shim: To change the angle of a bolt-on guitar neck.

2.🎄Solid maple: Why choose solid maple, because it is better than plastic to restore original music , so that we can enjoy more beautiful music .This is the bridge between the neck and the body, maple allows for better resonance and stability than plastic.The pursuit of a more beautiful sound is our goal for music。"You never hear the other side. You never hear people saying a cardboard or plastic shim ruined their guitar."

3.🎄Highlight Advantage：Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck

Guitar Neck for 4 String Electric Bass

Canada Maple 21 Fret Bolt On

ROSEWOOD FRETBOARD: Electric guitar fret board has made of rosewood material that is widely used in guitar fret board, high hardness, stable and durable.

SUIT FOR YOUR GUITAR: Electric guitar fret board compatible with 41 inch 20 frets acoustic guitar, the fretboard is classic appearance with 20 frets and white dots inlay, and easily matched for your guitar.

DIY REPLACEMENT: You can pick one to enjoy the fun of diy and improve your hands-on ability.

New Yinfente 24 Fret Electric Guitar Neck 42mm Nut Width , 56mm Heel Width

24 fret. 25.5 inch, Jackson headstock, Maple wood Neck, Rosewood wood Fretboard

Shark Tooth Inlay Floyd Rose Locking Nut , Truss Rod Installed At Headstock

Roasted maple neck

“Early 70’s C”-shaped profile; 9.5”-radius maple fingerboard

21 medium jumbo frets; pre-slotted synthetic bone nut

New electric Guitar Neck Maple wood Rosewood Fretboard 42mm nut width , 56mm heel width

24 fret. 25.5 inch, Paddle headstock Dot Inlay

All tested , under good condition.

Comfortable "Modern C" neck profile

9.5" radius fingerboard

22 medium jumbo frets

Roasted maple neck

“Modern C”-shaped profile; 9. 5”-radius maple fingerboard

20 medium-jumbo frets; synthetic bone nut

1951 precision bass shaped Neck

Tele bass headstock

Maple

Roasted Canadian Maple Neck,Very Stable And Beautiful

Well Selected Mahogany Body,Beautiful Grain And Warm Sound

Roasted Canadian Maple Fingerboard,Good For Play

New electric guitar neck 22fret 25.5inch , Maple Wood Neck with Rosewood Fretboard, Man & Wolf Inlay into Fretboard

Bolt On Heel with 12inch radius and 42mm nut width, 56mm heel width, medium jumbo fret wire

Double action truss rod installed.

New 20Fret Bass Guitar Neck 42mm Nut Width , 64.5mm Heel Width, Maple Guitar neck with Rosewood Fretboard Block Inlay

20 fret. 34inch, Straight headstock, Maple wood Neck, Rosewood wood Fretboard

Block Inlay with Normal Nut , Truss Rod Installed At Headstock

Electric guitar neck made of canadian maple.

Classic yellowish matte paint,cow bone nut.

Canadian maple fingcerboard with 22 medium(2.7mm) cupronickel fret wire and black mark dot inlay,smooth fingerboard edge, no hand scratched.

Deep “C” neck shape

Smooth rolled fingerboard edges

Satin finish that provides a comfortable feel

The effective chord length of the neck of the electric guitar is 25.5"(648mm),fingerboard radius 14"(356 mm) for more dimensions, you can refer to the picture or contact me.

Width at Heel :2.22 inch / 56.50 mm (±0.5 mm Deviation),Depth at Heel : 0.87 inch / 1.08 inch with Fingerboard (22.00mm / 27.50mm(±0.5mm Deviation).

These necks can replace your Tele guitar necks.

1. Used to change the angle of a bolt-on guitar neck

2. Made of solid maple to match the guitar neck

3. Better than the typical homemade "guitar pick" neck joint shims, which create an unwanted gap, these tapered shims cover the entire heel of the neck

24 fret. 25.5inch scale length,fingerboard radius 14"(356 mm),Jackson headstock, maple wood neck, maple wood Fretboard.

DIY your own like electric guitar project.

Shark fin inlay,42mm locking nut , truss rod installed at headstock.

Fretless Electric Bass guitar neck 20 Fret

Maple fingerboard Gloss

4 String Nut 38mm

1. This guitar neck is compatible for Fender TL style electric guitar neck replacement.

2. High-quality maple neck, delicate and unique.

3. Fingerboard with 22 frets, smooth and high density.

Effective String Length: 25.5"/648mm

Width at Heel :2.22 inch / 56.50 mm (±0.5 mm Deviation),Depth at Heel : 0.87 inch / 1.08 inch with Fingerboard (22.00mm / 27.50mm(±0.5mm Deviation).

These necks can replace your strat guitar necks.

1. For ST electric guitar, great replacement for your ST guitar.

2. 10mm head machine peg holes for tuner installation.

3. Adjustable truss rod has been installed at the headstock.