Best Motorguide Electric Motor Mounts in 2026

PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S

FIT - The Bullnose Rudder is a boat rudder that fits a 1 1/8" (1.125") transom trolling motor shaft. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5" high x 4.75" wide and fits a 1 1/8" shaft diameter. It's most commonly used for "but not limited to" minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more.

ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, “it prevents the boat from spinning as much when the motor is off”. Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install and you are ready to go.

45" Shaft, 24v, 80 lbs Thrust

Universal Sonar 2: Keeps your transducer and wiring completely concealed and protected, running everything through the trolling motor's shaft, with shielded connectors

i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen

The Minn Kota Terrova features an easy-to-deploy system of fallaway ramps that effortlessly slide the trolling motor into the water, plus a spring-loaded Lift-Assist design for easy stowing.

A low-profile electric foot pedal offers two steering options (heel/toe pedal and left/right steering buttons) and includes Spot-Lock activation, rotary speed control dial, momentary/constant on toggle, and AutoPilot on/off toggle.

Using GPS to lock onto fishing spots with Spot-Lock, record paths, and command speed, the i-Pilot Link system allows you to control your motor from the touchscreen remote or from a virtual remote on your Humminbird fish finder (sold separately).

52" Shaft, 24v, 70 lbs Thrust

Latch & Door Bracket: This bracket gives you a rock-solid hold while stowing your trolling motor and makes for easy removal at the end of the day

Heel-Toe / Cable-Steer Foot Pedal: Get heel/toe control of your motor with this ultra-responsive foot pedal that includes speed control, and momentary and constant on/off. Made with a high-impact composite material for unparalleled durability

Folds down when not in use

Easily removable, leaves only a low profile base

Can be cut to fit

54" Shaft, 12v, 55 lbs Thrust

i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen

AutoPilot: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current

The only trolling motor that can automatically stow and deploy itself with the push of a button, the Minn Kota Ulterra provides convenient control via the included i-Pilot remote or foot pedal.

Trim the Ulterra up or down at the push of a button to adjust to changing fishing conditions.

Using GPS to lock onto fishing spots with Spot-Lock, record paths, and command speed, the i-Pilot Link system allows you to control your motor from the touchscreen remote or from a virtual remote on your Hummingbird fish finder (sold separately).

36" Shaft, 12v, 45 lbs Thrust

Latch & Door Bracket: This bracket gives you a rock-solid hold while stowing your trolling motor and makes for easy removal at the end of the day

Heel-Toe / Cable-Steer Foot Pedal: Get heel/toe control of your motor with this ultra-responsive foot pedal that includes speed control, and momentary and constant on/off. Made with a high-impact composite material for unparalleled durability

48" Shaft, 12v, 45 lbs Thrust

Deploy-Assist Lever: Get in and out of the water easily. Just depress the lever to deploy your trolling motor and when it's time to move, it stows easily and securely

Side-To-Side/Electric Foot Pedal: Control speed, steering, and momentary and constant on/off with the PowerDrive foot pedal, which is waterproof and features an 18' cord. Note: the foot pedal is not included with i-Pilot models

45" Shaft, 36v, 112 lbs Thrust

Universal Sonar 2: Keeps your transducer and wiring completely concealed and protected, running everything through the trolling motor's shaft, with shielded connectors

i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen

STURDY & DURABLE - The rudder is made of stainless steel material, and also equipped with stainless steel screws and jam nut to improve stability, rust and corrosion resistance. It is sturdy and durable to extend the service life and allowing you to focus more on fishing

MORE CONTROL - Easy turns when steering, provides better control in wind or other most weather environments, reduces the need for oars, it really helps to keep your boat heading in the wind and reduces your boat rotation as much as possible when the motor is turned off

UNIVERSAL MOUNT - Compatible with most electric trolling motors (24 to 55 thrust). Ideal for use as a canoe rudder, or a inflatable pontoon rudder, kayak rudder, or pelican bass raider 10E rudder

45" Shaft, 12v, 55 lbs Thrust

Latch & Door Bracket: This bracket gives you a rock-solid hold while stowing your trolling motor and makes for easy removal at the end of the day

Heel-Toe / Cable-Steer Foot Pedal: Get heel/toe control of your motor with this ultra-responsive foot pedal that includes speed control, and momentary and constant on/off. Made with a high-impact composite material for unparalleled durability

54" Shaft, 12v, 55 lbs Thrust

Deploy-Assist Lever: Get in and out of the water easily. Just depress the lever to deploy your trolling motor and when it's time to move, it stows easily and securely

Side-To-Side/Electric Foot Pedal: Control speed, steering, and momentary and constant on/off with the PowerDrive foot pedal, which is waterproof and features an 18' cord. Note: the foot pedal is not included with i-Pilot models

52" Shaft, 12v, 55 lbs Thrust

Latch & Door Bracket: This bracket gives you a rock-solid hold while stowing your trolling motor and makes for easy removal at the end of the day

Hand-steer with 5-Speed Settings: Choose from five speed settings to dial in the right speed control when you're trolling

The Minn Kota Terrova features an easy-to-deploy system of fallaway ramps that effortlessly slide the trolling motor into the water plus a spring-loaded Lift-Assist design for easy stowing

A low-profile electric foot pedal offers two steering options (heel/toe pedal and left/right steering buttons) and includes Spot-Lock activation rotary speed control dial momentary/constant on toggle and AutoPilot on/off toggle

Using GPS to lock onto fishing spots with Spot-Lock record paths command speed and steering the i-Pilot Link system allows you to control your motor from the color touchscreen remote or from a virtual remote on your fish finder (sold separately)

54" Shaft, 24v, 70 lbs Thrust

CoPilot: The original wireless remote gives you push-button command of speed and steering of your trolling motor

Advanced Corrosion Protection: Riptide motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection

60" Shaft, 24v, 70 lbs Thrust

Deploy-Assist Lever: Get in and out of the water easily. Just depress the lever to deploy your trolling motor and when it's time to move, it stows easily and securely

Side-To-Side/Electric Foot Pedal: Control speed, steering, and momentary and constant on/off with the PowerDrive foot pedal, which is waterproof and features an 18' cord. Note: the foot pedal is not included with i-Pilot models

48" Shaft, 12v, 55 lbs Thrust

CoPilot: The original wireless remote gives you push-button command of speed and steering of your trolling motor

Advanced Corrosion Protection: Riptide motor lower unit housings are grit-blasted, then coated in aluminum to prevent oxidization and rust. Then, a final layer of powder coat paint provides the ultimate protection

72" Shaft, 36v, 112 lbs Thrust

i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen.

AutoPilot: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current

48" Shaft, 24v, 70 lbs Thrust

Deploy-Assist Lever: Get in and out of the water easily. Just depress the lever to deploy PowerDrive and when it's time to move, it stows easily and securely

PowerDrive Foot Pedal: Control speed, steering, and momentary and constant on/off with the PowerDrive foot pedal, which is waterproof and features an 18' cord. Not included on models with i-Pilot

60" Shaft, 24v, 80 lbs Thrust

i-Pilot Link Integrated GPS Trolling System: i-Pilot Link gives you unprecedented control over your boat by linking your trolling motor to your Humminbird fish finder. Control your trolling motor from Link's color touch-screen remote or the Humminbird. You can set Spot-Locks, record paths, follow depth contours, automatically navigate to your favorite spots, control speed and steering, and more.

Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot remote or Humminbird fish finder.

The Minn Kota Terrova features an easy-to-deploy system of fallaway ramps that effortlessly slide the trolling motor into the water, plus a spring-loaded Lift-Assist design for easy stowing.

A low-profile electric foot pedal offers two steering options (heel/toe pedal and left/right steering buttons) and includes Spot-Lock activation, rotary speed control dial, momentary/constant on toggle, and AutoPilot on/off toggle.

Using GPS to lock onto fishing spots with Spot-Lock, record paths, and command speed, the i-Pilot Link system allows you to control your motor from the touchscreen remote or from a virtual remote on your Humminbird fish finder (sold separately).

Superior quality - The rudder is made of stainless steel with matching stainless steel screws and nuts, which is corrosion-resistant and rust-proof. It can be used for a long time even in the wet environment underwater.

Reduced Steering Burden - Reducing drag when steering provides better steering control in high winds or other weather, reduces the need for oars, helps keep your boat on course in the wind, and minimizes your boat's spin when the motor is off.

WIDE APPLICATION - The rudder is compatible with most electric trolling engines (24 to 55 thrust). Suitable for use with canoe rudders, inflatable pontoon rudders, kayak rudders, or Pelican Bass Raider 10E rudders.

60" Shaft, 24v, 80 lbs Thrust

Built-in MEGA Side and Down Imaging: With a transducer built right into the trolling motor, you get crystal clear Humminbird MEGA Side Imaging and MEGA Down Imaging with a clean look and protected housing

i-Pilot Link Integrated GPS Trolling System: i-Pilot Link gives you unprecedented control over your boat by linking your trolling motor to your Humminbird fish finder. Control your trolling motor from Link's color touch-screen remote or the Humminbird. You can set Spot-Locks, record paths, follow depth contours, automatically navigate to your favorite spots, control speed and steering, and more

60" Shaft, 24v, 70 lbs Thrust

Deploy-Assist Lever: Get in and out of the water easily. Just depress the lever to deploy your trolling motor and when it's time to move, it stows easily and securely.

Built-in Universal Sonar 2: Keeps your transducer and wiring completely concealed and protected, running everything through the trolling motor's shaft, with shielded connectors.

80 lbs Thrust, 60" Shaft

i-Pilot GPS Trolling System: The most-trusted GPS system in fishing. i-Pilot uses GPS to control your trolling motor with incredible features that keep you on the fish. Set Spot-Locks, record paths, control speed and steering, and more. i-Pilot makes boat positioning and control automatic, and you can take command from its easy-to-read large LCD screen.

Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot Link GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot Link remote or Humminbird fish finder.

60" Shaft, 36v, 112 lbs Thrust

i-Pilot Link Integrated GPS Trolling System: i-Pilot Link gives you unprecedented control over your boat by linking your trolling motor to your Humminbird fish finder. Control your trolling motor from Link's color touch-screen remote or the Humminbird. You can set Spot-Locks, record paths, follow depth contours, automatically navigate to your favorite spots, control speed and steering, and more

AutoPilot: Automatically navigate your boat in any direction you choose. Just point the head of your trolling motor in the direction you want to travel, activate AutoPilot, and your trolling motor will keep you on that heading automatically, even correcting for wind, waves and current

The rudder clamp is an innovative and practical solution for improving the steering and control of small watercraft, especially when trolling in choppy or windy conditions.

The advantages of the transom mount boat rudder is its ability to hold a true course at both slow and high trolling speeds, making it an essential tool for anglers and boaters who require precision and control.

The clamp-on boat rudder is applicable to a wide range of small watercraft that have a transom trolling motor shaft with a diameter of 1.125 inches. It is compatible with most trolling motors, fits for Minn Kota, MotorGuide, Newport Vessels, and others.

Adding the boat rudder to your boat trolling motor made the trolling motor more stable as trolling motors are known for lack of steering especially when the big wind picks up. With trolling motor stabilizer, even in the big wind, the direction is in your own hand, don't worry rudder out of control any more. It is recommended using for towing motors which the biggest horsepower up to 3 HP or the biggest thrust up to 70 pounds, recommended the maximum weight for 55 pounds.

Our kayak rudder kit measures 3.75" high x 4.75" wide and suitable for a 23-32MM" shaft diameter which is boat rudder clamp compatible with most 24-55lb transom mount trolling motors. It's commonly used for motor guide trolling motors, minn kota trolling motor, newport vessel trolling motor, etc. Designed for kayak, canoe, seayak, angling boat, etc.

It can last long time. And the screws are made from hight quality material which is one kind of anti-rust and resistant to hydrochloric acid corrosion material, so you could use it in the seawater.

72" Shaft, 36v, 112 lbs Thrust

i-Pilot Link Integrated GPS Trolling System: i-Pilot Link gives you unprecedented control over your boat by linking your trolling motor to your Humminbird fish finder. Control your trolling motor from Link's color touch-screen remote or the Humminbird. You can set Spot-Locks, record paths, follow depth contours, automatically navigate to your favorite spots, control speed and steering, and more

Spot-Lock with Jog: Spot-Lock will hold you in place with unparalleled GPS accuracy. Available on i-Pilot Link GPS system that is pre-installed, Spot-Lock gives you the power to stay right on top of any productive fishing spot, without touching your trolling motor. With the included heading sensor, you can use Jog to move your Spot-Lock location five feet in any direction. Activate Spot-Lock from the i-Pilot Link remote or Humminbird fish finder.