Best Aneng Electrical Battery Testers in 2026

⚡【High Accuracy & Wide Range】6000 Counts display, sampling time 2-3/sec,so it can accurately measure DC Voltage 600.0mV ~ 600V, AC Voltage 6.000V ~ 600V, AC/DC Current 600mA ~ 10A, Resistance 600 ohm~60M ohm, Capacitance 9.999nF ~ 99.99mF, Temperature -4 ~ 1832℉, Frequency 9.999Hz ~9.999MHz, Duty Cycle 0.1%~99.9%, Battery test 1.5V/9V

⚡【Multifunctional Electrical Meter】 It functions Continuity (Beep with Light Flashing), Non-contact Voltage test, Data Hold, Auto Back Light, Auto Shut OFF, Relative Value, Battery Test, Diode Test, it can even switch between Manual / Auto Ranging, it’s a large read out display multimeter ideal for home use, hobbyist.

⚡【“REL” for Zeroing Out】 Press “REL” button to zero out the meter before measurement, the multimeter will test out the most accurate readings, especially useful for measurement micro reading subject.

【High Accuracy & Wide Range】6000 Counts display, sampling time 2-3/sec,so it can accurately measure DC Voltage 600.0mV ~ 600V, AC Voltage 6.000V ~ 600V, AC/DC Current 600mA ~ 10A, Resistance 600 ohm~60M ohm, Capacitance 9.999nF ~ 99.99mF, Temperature -4 ~ 1832℉, Frequency 9.999Hz ~9.999MHz, Duty Cycle 0.1%~99.9%, Battery test 1.5V/9V

【Multifunctional Electrical Voltmeter】 It functions Continuity (Beep with Light Flashing), Non-contact Voltage test, Data Hold, Auto Back Light, Auto Shut OFF, Relative Value, Battery Test, Diode Test, it can even switch between Manual / Auto Ranging, it’s a large read out display multimeter ideal for home use, hobbyist.

【“REL” for Zeroing Out】 Press “REL” button to zero out the meter before measurement, the multimeter will test out the most accurate readings, especially useful for measurement micro reading subject.

【Accurate Reading & Wider Range】6000 Counts display, sampling time 2-3/sec,so it can accurately measure DC Voltage 600.0mV ~ 600V, AC Voltage 6.000V ~ 600V, AC/DC Current 600mA ~ 10A, Resistance 600 ohm~60M ohm, Capacitance 9.999nF ~ 99.99mF, Temperature -4 ~ 1832℉, Frequency 9.999Hz ~9.999MHz, Duty Cycle 0.1%~99.9%, Battery test 1.5V 9V

【Multifunctional Electrical Meter】 It functions Continuity (Beep with Light Flashing), NCV test, Data Hold, Auto Back Light, Auto Shut OFF, Relative Value, Battery Test, Diode Test, it can even switch between Manual / Auto Ranging, it’s a large read out display multimeter ideal for home use, hobbyist.

【“REL” for Zeroing Out】 Press “REL” button to zero out the meter before measurement, the multimeter will test out the most accurate readings, especially useful for measurement micro reading subject.

⚡【AC DC Clamp Amp Voltmeter w/ NCV】This clamp multitester can accurately measure AC/DC Amperage, AC/DC Voltage, Resistance, Frequency or Duty Cycle, Capacitance and also provides Noncontact AC Voltage(NCV) detection, Diode, Continuity Buzzer and Temperature(℃/℉) tests. Easy to use in non-contact ampere measures, troubleshoot electrical problems in , motors, household appliances, HVAC

⚡【Continuous Data Logging Clamp DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min/Avg on the same interface with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full.

⚡【Reliable True RMS Voltage Amperage Meter】0.1 amp resolution for 0.1 ~ 60A AC DC current, 1A for 60 ~ 400A to support accurate amp reading, this clamp amp probe meter is more user-friendly for daily current measurement, such as troubleshooting car, boats battery

⚡【Monitoring on Your Phone】Smart clamp-on multi tester BT-7200APP can auto connect to your Android / Apple phones or tablet with ease, allows you viewing logging the data out of the arc flash zone 15m (50 ft) away, and save the measurement for detailed analysis, sharing later.

⚡【AC DC Clamp Amp Voltmeter w/ NCV】This clamp multitester can accurately measure AC/DC Amperage, AC/DC Voltage, Resistance, Frequency or Duty Cycle, Capacitance and also provides Noncontact AC Voltage(NCV) detection, Diode, Continuity Buzzer and Temperature(℃/℉) tests. Easy to use in non-contact ampere measures, troubleshoot electrical problems in , motors, household appliances, HVAC

⚡【Continuous Data Logging Clamp DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min on the same interface with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full.

【Must Have Accurate Multimeter】- 6000 counts accurately measure AC/DC voltage, AC/DC current, resistance, frequency, continuity, diode, hFE,with thermocouple to measure the temperature,NCV,etc.

【Multifunction Voltmeter】- The digital test meter can be used to measure high precision range than other.Automatically turn on bright backlight and indicator light on the dial when darkness.Data hold,low power indication and auto shut off to save your battery.

【Troubleshoot electrical problem】- Turn the rotary switch to the NCV gear of the voltage meter and close to the lead being measured,buzzer will alarm,in order to make sure circuits were alive in the house.Safely and Accurately to check household electrical problems.

✅TRUE RMS CLAMP ON MULTIMETER - 6000 Counts accurately measures AC DC current to 1000A , voltage , resistance, capacitance, frequency, duty cycle. Even more testing on Temperature (℃/℉), Inrush Current, Continuity test with buzzer, Diode test.

✅BOTH AC/DC CLAMP-ON AMMETER - High resulotion, True RMS allows you get accurate measurement regardless of waveforms. Relative mode for Capacitance, DC Inrush, Zero out for lower amps measurement, data hold, max/min, auto power off, polarity and low battery indicator.

✅SAFE AND EASY TO USE - Overload protection on all ranges. Use this clamp amp meter for unidentified wire testing, Contactless amperemeter test for amperage, Avoid electric shock without touching any wires.