Best 8Milelake Engine Tools in 2026

【 Exclusive Design 】 EWK Camshaft Retaining Tool is a direct replacement for Cadillac, Buick, Saturn, Pontiac, Chevrolet. Specialty EN 46105 / EN 48383 car camshaft retaining tools for V6 high feature engine 2.8L, 3.0L, 3.6L, 3.6L VIN 7, 2.8L VIN 7.

【 Wide Applications 】 Compatible for GM vehicle models: CTS, SRX, STS, GMC Acadia, Lacrosse, Enclave, Aura, Pontiac G6, Outlook, VUE, Torrent Malibu, Equinox, Camaro, Traverse, and Rendezvous.

【 Perfect Fit 】 The camshaft holding tools precisely locks the left and right cams. The retaining plates placed on both side of the head to prevent rotation and hold the camshaft at TDC firmly for precise timing.

【Precise Timing】Allows to lock the camshaft firmly and accurately, ensuring precise timing during timing chain or cylinder head replacement. Prevents possible engine damage due to incorrect timing.

【Maximized Budget】All necessary tools are included in one kit, making it easy to replace the timing chain on petrol engines and saving you from expensive repair costs.

【Extra Support】Ensure the engine remains stable, preventing potential damage or injury caused by a loose or unsecured engine.

【Work Smart】This spark plug boot removal Tool T10112 is a special tool for quickly remove the spark plug lead without destroying any component.

【Time Saver】The angled shaft fits well into narrow plug cavity with no manifold dismantling needed, reach the plugs on cylinder #2 and #3 smoothly.

【High Quality】Shaft and boot end are constructed from premium stainless steel for maximum strength and longevity. The ergonomically grip convenient to use.

【Easy to use】Easily remove and install the valve spring without removing the cylinder head. Give it a good push or whack on the remover to disassemble the valve keepers.

【Wide Application】Fit most overhead valve engines, with valve stems 4.5-7.5mm (11/64"-19/64") for Toyota 4-cylinder & Chrysler engines, and 7.9-9.5mm (5/16"-3/8") for cars, motorcycles, and boats.

【Damage-Free】Remover with built-in magnet to catch the valve keepers, preventing potential damage caused by dropping the keepers into the engine.

【Easy operation】This tool is for the purpose to relieve the tension on the camshaft chain and lift it up far enough to clean, remove and replace the gasket and seal. Easy installation for you to adjust the engine cam by yourself.

【 Accurate Design 】Compatible with VW Audi 1.8T 2.7T 2.8 3.2 4.2 engines. For accurate camshaft locking, timing chain installation and removal.

【 Damage Free 】The plastic material is designed to prevent the tool from damaging the chain tensioner if use it improperly. Comes with chain adjuster bracket OEM no. 3366.

【Extended Handle Design】Our extended hanle is longer than others in the market, it makes job more easy. Great camshaft sprocket tool for timing belt changes, cam seal replacement, cam gear removal, and camshaft pulleys installation. Also works on diesel injection pump or water pump.

【Adjustable Arm Design】Adjustable arm design fit the sprocket hole from 1-1/2" to 8-5/8". EWK camshaft sprocket tool provide maximum working range in the market.

【4 Size hold Pin】4 different size hold pin 6-10mm, 8-11mm, 10-12mm, 11-16mm. They can be applied most of camshaft pulley in the market.

【 Must Have】 Indispensable to replacing cam belts and pulleys for Volvo, ensuring precise timing when the tool aligning the slot with the cams. Fits precision-made fitting Volvo vehicles efficiently.

【Exclusive Design】 Compatible with Volvo 4-cylinder, 5-cylinder, and 6-cylinder engines. Suitable for a wide range of Volvo models including 850, 960, C30, C70, S40, S60, S70, S80, S90, V40, V50, V70, V90, XC70, XC90. To ensures precise installation of the camshafts with the cam cover.

【 Accurate Alignment 】Fix leaking camshaft seal behind a VVT cam pulley. Get precise alignment even without a cam gear locking tool. This kit align camshafts and complete cam belt replacement easily. Essential tools when doing the job!

【 Exclusive Design 】The set is designed for quick water pump replacement. Locks flywheel in place when removing harmonic balancer on 6.6L Duramax engines with Allison automatic transmissions.

【 Time Saver 】Saves time by locking the flywheel at the transmission instead of having to remove the starter for water pump replacement. Easy to install and effectively keep the flywheel from turning.

【 Easy to Use 】 Locks the flywheel easily to the transmission when changing water pump. The flywheel locking tools work with Duramax 2500 / 3500 pickups and 4500 / 5500 trucks.

【Wide Applications】EWK Fuel Injection Service Kit can be used to clean the intake valve, combustion chamber, vacuum system and test the vacuum system pressure. Effectively remove engine carbon deposits and increase gas mileage performance.

【Money Saver】A car that doesn't run at its optimum performance level may cost you a lot in the long run. Reduce excessive fuel consumption with regular cleaning not only able to improve engine performance, reduce harmful emissions, maximize gas mileage and lower maintenance costs.

【Accurate Control】Equipped with a liquid-filled gauge for accurate vacuum reading and monitoring chemical flow. The most effective and economical way to maintaining your vehicle performance.

【Complete Kit】This flywheel locking timing tool kit includes reinforced OEM replacement camshaft and flywheel locking tools, crankshaft pulley alignment tools, a camshaft sprocket puller, a camshaft alignment plate, a camshaft setting bar, as well as all the pins necessary for locking other various parts of your engine.

【Wide Applications】Perfectly applicable for a large range of Ford vehicles: B-MAX, C-MAX, Cougar, Courier, EcoSport, Escape, Fiesta, Focus, Focus C-Max, Fusion, Galaxy, Ka+, Kuga, Mondeo, Puma, S-MAX, Tourneo Connect, Tourneo Courier, Transit, Transit Connect, Transit Courier. Also works with some recent Volvo vehicles: S60, S80, V40, V60, V70.

【Engine Code】1.25 16V (DHA, DHB, DHC, DHD, DHH, DHG, F8JA, F8JB, FUJA, FUJB, M7JA, M7JB) ; 1.4 16V (ASDA, ASDB, FHA, FHD, FHE, FHF, FXDA / C, FXDB / D, FXJA, FXJB); 1.6 16V (FYDA / C, FYDB / D, FYJA, FYJB, L1F, L1J, L1L, L1N, L1O, L1T, L1V, L1W, HWDA, HWDB); 1.7 16V (MHA, MHB); 1.8 16V (EYDB, EYDC, EYDD, EYDE, EYDJ, EYDG, EYDI, EYDJ, EYPA, EYPC, RKA, RKB, RKF, RKH, RKJ, RKK) ; 2.0 RS / ST170 (ALDA, HMDA) 2.0 16V with control chain (AODA, AODB, AOWA, CJBA / B)