Best Widespread Faucets in 2026

Touch-Flo style pure cold water faucet with 8 in. overall height with 5-1/2 in. 45-degree extended spout projection

This unit fits counters up to 1-3/8” thick . Adapters available for thicker countertops. Faucet can be mounted in a hole size greater than ½ in. up to 1-3/8 in.

Can be installed with water filter and/or in-line chiller; cannot be modified to use with hot water tank. If using water filter (F400 in-line water filter unit & F400R cartridges sold separately), install between water supply and faucet

Touch-Flo style pure cold water faucet with 6-1/2" in. overall height with 2-5/8 in. spout projection

This unit fits counters up to 1-3/8” thick . Adapters available for thicker countertops. Faucet can be mounted in a hole size greater than ½ in. up to 1-3/8 in.

Can be installed with water filter and/or in-line chiller; cannot be modified to use with hot water tank. If using water filter (F400 in-line water filter unit & F400R cartridges sold separately), install between water supply and faucet

Touch-Flo style pure cold water faucet with 6-1/2" in. overall height with 2-5/8 in. spout projection

This unit fits counters up to 1-3/8” thick . Adapters available for thicker countertops. Faucet can be mounted in a hole size greater than ½ in. up to 1-3/8 in.

Can be installed with water filter and/or in-line chiller; cannot be modified to use with hot water tank. If using water filter (F400 in-line water filter unit & F400R cartridges sold separately), install between water supply and faucet

Touch-Flo style pure cold water faucet with 6-1/2" in. overall height with 2-5/8 in. spout projection

This unit fits counters up to 1-3/8” thick . Adapters available for thicker countertops. Faucet can be mounted in a hole size greater than ½ in. up to 1-3/8 in.

Can be installed with water filter and/or in-line chiller; cannot be modified to use with hot water tank. If using water filter (F400 in-line water filter unit & F400R cartridges sold separately), install between water supply and faucet

Touch-Flo style pure cold water faucet with 6-1/2" in. overall height with 2-5/8 in. spout projection

This unit fits counters up to 1-3/8” thick . Adapters available for thicker countertops. Faucet can be mounted in a hole size greater than ½ in. up to 1-3/8 in.

Can be installed with water filter and/or in-line chiller; cannot be modified to use with hot water tank. If using water filter (F400 in-line water filter unit & F400R cartridges sold separately), install between water supply and faucet

Touch-Flo style pure cold water faucet

Single black plastic spring piston handle assembly

6-1/2 in. overall height with 2-5/8 in. spout projection

Touch-Flo style pure cold water faucet with 6-1/2" in. overall height with 2-5/8 in. spout projection

This unit fits counters up to 1-3/8” thick . Adapters available for thicker countertops. Faucet can be mounted in a hole size greater than ½ in. up to 1-3/8 in.

Can be installed with water filter and/or in-line chiller; cannot be modified to use with hot water tank. If using water filter (F400 in-line water filter unit & F400R cartridges sold separately), install between water supply and faucet

Touch-Flo style pure cold water faucet with 6-1/2" in. overall height with 2-5/8 in. spout projection

This unit fits counters up to 1-3/8” thick . Adapters available for thicker countertops. Faucet can be mounted in a hole size greater than ½ in. up to 1-3/8 in.

Can be installed with water filter and/or in-line chiller; cannot be modified to use with hot water tank. If using water filter (F400 in-line water filter unit & F400R cartridges sold separately), install between water supply and faucet

1/2 in. IPS front diverter

Mounts to wall with 1/2 in. nipple

Extends standard tub spouts

8-1/2” extra long reach reduces water splash on tubs with wide decking

The rear mounted diverter transfers water from the bath to the shower head

Rear threads

Classic solid brass single lever handle cold water dispenser faucet. 10-1/2 in. Overall height with 5 in. Gooseneck spout projection

Single lever handle with 1/4-turn ceramic disc cartridge. 1/4 in. Compression tube inlet

Can be installed with water filter (F400) and/or in-line chiller; cannot be modified to use with hot water tank

Classic solid brass single lever handle cold water dispenser faucet. 10-1/2 in. Overall height with 5 in. Gooseneck spout projection

Single lever handle with 1/4-turn ceramic disc cartridge. 1/4 in. Compression tube inlet

Can be installed with water filter (F400) and/or in-line chiller; cannot be modified to use with hot water tank

Contemporary single lever handle cold water dispenser faucet. 11-1/2 in. overall height with 5-3/4 in. Gooseneck spout projection

Solid brass construction

Can be installed with water filter (F400) and/or in-line chiller; cannot be modified to use with hot water tank

Contemporary single lever handle cold water dispenser faucet. 11-1/2 in. overall height with 5-3/4 in. Gooseneck spout projection

Solid brass construction

Can be installed with water filter (F400) and/or in-line chiller; cannot be modified to use with hot water tank

Contemporary single lever handle cold water dispenser faucet. 11-1/2 in. overall height with 5-3/4 in. Gooseneck spout projection

Solid brass construction

Can be installed with water filter (F400) and/or in-line chiller; cannot be modified to use with hot water tank

4 in 1 ROTARY MIXER HANDLE FUCTIONS: ONE - Move rotary mixer handle forward for hot water. TWO - Press Safety Lock button on face of handle and pull farther forward for instant hot water. THREE - Push handle backwards for cold water. FOUR - Tilt handle away from spout to control the stream of water. Push handle to vertical to turn the water off. This valve will not be hampered by the closeness of the backsplash

FAUCET: 16-1/8" overall height with a 7-1/2" gooseneck spout projection and a 8-1/4" clearance from spout to top of sink. 1-hole or 3-hole installation with base plate

DUAL SPRAY MODE FAUCET WITH PULL OUT SPAY HEAD: Faucet features a pull-out spray head with dual waterways, an aerated one for dishes, and the center spout for the instant hot water appliance. 1-hole or 3-hole installation with base plate

Calorah 1-Handle hot water dispenser faucet offers quick and easy water control. Quick heating water tank (QHT-1PV) - Required! SOLD SEPARATELY

Spring piston handle assembly with auto-off lever for your safety

10-3/8 in. overall height with 4-1/2 in. gooseneck spout projection

Victorian single lever handle cold water dispenser faucet. 9 in. Overall height with 5 in. Gooseneck spout projection

Solid brass construction

Can be installed with water filter (F400) and/or in-line chiller; cannot be modified to use with hot water tank

Touch-Flo style pure cold water faucet with 8 in. overall height with 5-1/2 in. 45-degree extended spout projection

This unit fits counters up to 1-3/8” thick . Adapters available for thicker countertops. Faucet can be mounted in a hole size greater than ½ in. up to 1-3/8 in.

Can be installed with water filter and/or in-line chiller; cannot be modified to use with hot water tank. If using water filter (F400 in-line water filter unit & F400R cartridges sold separately), install between water supply and faucet

Contemporary single lever handle cold water dispenser faucet. 11-1/2 in. overall height with 5-3/4 in. Gooseneck spout projection

Solid brass construction

Can be installed with water filter (F400) and/or in-line chiller; cannot be modified to use with hot water tank

Tub Spout, 7 inch reach

1/2 in. copper nipple

Fits 1/2 in. copper stub out

Contemporary 10-5/8" 2-Lever Handle Hot and Cold Water Dispenser Faucet kit includes both faucet and quick heating water tank 1300W (QHT-1PV)

Faucet: 10-5/8 in. overall height with 3-1/4 in. gooseneck spout projection and two (2) lever handles with 1/4-turn ceramic disc cartridges

Tank: 5/8 Gallon Stainless Steel Quick & Hot Instant Hot Water Tank delivers 100 cups per hour of instant hot water for cooking, beverages, cleaning and more

7" slightly longer reach then standard spouts to reduce water splash on tubs with wide decking

1/2 in. IPS front diverter

Mounts to wall with 1/2 in. nipple

Classical Design: every detail of the bathtub spout is finely crafted and polished; The quality plating process completes the product itself; The 5 1/4" reach wall mount tub spout with diverter is designed in sturdy metal and plated in chrome for classic simplicity; This will make the bathtub faucet stand the test of time

Connection Size: this 1/2" IPS thread female tub spout fits most tubs and fits 4" to 4 1/2" brackets on tile walls; The front pull up diverter allows water to flow upward to your shower head or downward into the tub for the desired shower or bath

Serviceable and Qualified: all metal construction with zinc and chrome plated finish ensures durability and longevity, making the bathtub faucet long lasting, resists corrosion and fading while creating a bright, fresh feel to your bathroom

Touch-Flo style pure cold water faucet with 6-1/2" in. overall height with 2-5/8 in. spout projection

This unit fits counters up to 1-3/8” thick . Adapters available for thicker countertops. Faucet can be mounted in a hole size greater than ½ in. up to 1-3/8 in.

Can be installed with water filter and/or in-line chiller; cannot be modified to use with hot water tank. If using water filter (F400 in-line water filter unit & F400R cartridges sold separately), install between water supply and faucet