Best Primed Fender Flares in 2026

Fitment: Compatible with 07-13 Silverado 1500 / 07-14 Silverado 2500HD 3500HD; Does NOT Fit Dually Models; Does NOT Fit Crew Cab; Fits 6.5 & 8.1Ft Fleetside Models Only; Fit with Regular Cab and Extended Cab Only

4Pcs/Kit: OE Style Front & rear fender flares for driver and passenger sides to protect wheel from mud, scratches, sand and other outer damage. It can be installed as is or can be DIY painted to your preferred color.

Size: 3/4" front tire coverage - 3/4" rear tire coverage; 4-1/2" front - 5" rear flare height.

ENHANCE & PROTECT YOUR RIDE – The universal fender EZ Flares are a fast, easy, and low-cost way to give your car an aggressive, off-road look! Universal compatibility allows it to be installed on virtually all makes and models.

FAST & EASY INSTALLATION – Just 3 easy steps and you’ll extend your fender trim by up to 1 inch! No drilling or screws are required.

HANDLES ALL CONDITIONS & WEATHER – EZ Flares will help protect your paint from driveways, speed bumps, and curbs. It’ll easily withstand car washes, high speeds, and any temperature you put it through.

Universal heavy duty steel reinforced 2-1/2 inches flexy flare rubber fender extenders

Cost effective way to protect paint and body panels from dirt, rocks and road debris

Include a built-in curvature to maintain their form and shape without distorting

Comes With Alignment Tool - this tool is a great addition that helps fix twists or mis-aligned rubber trim after installation is completed.

Creates Barrier - helps protect vehicles paint by providing a flexible rubber gaskets between vehicle’s body panel and fender flare.

Improves Fitment - by adding extra coverage between the fender flare and vehicle’s body panel, helps reduce gaps for tighter fitment.

4Pcs/Kit: OE Style Front & rear fender flares for driver and passenger sides to protect wheel from mud, scratches, sand and other outer damage.

Width: 0.75" Front - 0.75" Rear / Compatible with 99-06 Silverado 1500 2500 3500 & HD; Compatible with 2007 Silverado Classic 1500 2500 3500 & HD

High Quality: Made of lightweight and durable ABS plastic, 100% uv protection, no chalking, cracking, or warping.

MAXIMUM PROTECTION & TIRE COVERAGE – The universal Fender Flares PRO are fast, easy way to give your truck an aggressive, off-road look and stay legal! Universal compatibility allows it to be installed on virtually all makes and models.

FAST & EASY INSTALLATION – Just 3 easy steps and you’ll extend your fender trim by up to 2 inches! No drilling or screws are required. Features patented InvisEdge technology for a seamless & professional installation.

ENDURES ALL CLIMATES & WEATHER – Fender Flares PRO will help protect your paint from rocks and dirt. Our tough & durable Dura-X Foam rubber easily withstands car washes, high speeds, and any temperature you put it through.

Ⓞ Front: 2 Pcs : 790mm x 320mm x 50mm.Rear:2 Pcs : 790mm x 320mm x 50mm.Please make sure to measure vehicle's fenders before purchase! (Refer to figure 3)

ⓄMaterial:Made of high quality plastic, high strength, resistant to corrosion, harder and more durable. Protect wheel from mud, scratches, sand and other outer damage

Ⓞ Stylish: Redefine the look of your car and make your car unique.If you need to wheel flares change color, we strongly recommend you to seek professional spraying factory to change color coating

Package Include:890*4 Universal Fender Flares

Front:890mm*350mm;Rear:890mm*350mm

Made From High Quality Polyurethane

🚙【Material】Car Wheel Protection Anti-collision Strips is durable rubber and self-Adhesive, non-toxic, thick and flexible, plyable to hold up to compression.

🚙【Durable】Rubber seal strip has good flexibility and compressive deformation resistance, no cracks or deformation in long-term use. And strong adhesive backing, stick firmly and non-deguming, tear off without leaving a sticky residue.

🚙【Strengthen Protection】The anti-collision strip of the car wheel eyebrow can widen the wheel eyebrow, prevent the dirt from splashing on the surface of the car, and effectively keep the outside of the car clean. It also protects the brow wheel from everyday driving damage, such as dirt and scratches, and prevents paint peeling.

IMPORTANT:because the car wheel fender is made of high-strength soft rubber so that it is easy to deform.in order to ensure it be more stable after the install, if possible,you could heat it before install,and adjust to best fit the shape of your car tires eyebrow then stick wheel fender on the car.How To Install &Tips please kindly check it all !!!

TIPS TO PREVENT FENDER FLARES FALL OFF: 1.Please install the car wheel fender in good weather day or warm indoor.it would be better if use a heat gun or hair dryer to heating the item;they go on easy if you heat up each section of the rubber.(HIGHLY RECOMMEND). 2.Follow installation instruction(HOW TO INSTALL). 3.Leave the car alone for 24 hours after install the wheel fender flare.

HOW TO INSTALL: 1.Clean the pre-installed position,make sure the position is clean and dry before you install. 2. Measure the length of tail in need.3.Cut off excess length,heat it if possible. 4. Use the adhesion promoter(wipe paper) to wipe the pre-installed position,then waiting about 10 seconds. 5. Tear the cover of the glue of one end of car wheel rubber strip then stick on car. 6. Tear more cover of glue slowly and stick it on car slowly with strength.

FITMENT: 2009-2018 DODGE RAM 1500 2010-2021 RAM 2500 2011-2018 3500 2019-2021 3500 EXCLUDES DUALLY 2019-2021 1500 CLASSIC EXCLUDES REBEL MODELS

PRODUCT NOTES: rear flare tire coverage 2", rear flare height 4.75", minor drilling required, minor cutting required, Includes 2 rear fender flares only, instructions and mounting hardware

CRUCIAL TIRE COVERAGE. Keep dirt and debris off the truck Maximum tire coverage for whatever the road throws at you and keeps you legal when running larger wheel & tire packages

This flare trim is installed between the fender flare and the vehicle’s body, which can isolate vibration, reduce friction, protect the car paint, and eliminate the risk of pinching rocks and debris between the fender flare and the body of your vehicle.

30 feet : easy peel-and-stick on high quality 3M automotive grade adhesive tape applied to fender flare. This fender flare trim comes in acrylic automotive-grade adhesive tape.Strong bonding and easy installation.

Wiper style shape, adding extra coverage to your vehicle, creates a clean line between the vehicle’s body and the flare.

FUNCTION: The fender flare edge trim can create a solid bond between the flare and the body of your vehicle, isolates vibration and provides an attractive finish to your vehicle, and your vehicle's body panel without leaving nasty gaps.

MATERIAL: This fender flares rubber seal strip made of high-quality EPDM dense rubber materials, better sealing.

EASY INSTALL: Easy installation with no cutting or drilling required, 33 Feet length, usually enough to cover all 4 fender flares. No need re-order more.

【 functions 】Fender flares trim the edges like a rubber gasket that effectively protects the car's paint, sealing the guard against vibration.

【 Materials / Design 】Using a soft rubber material, the T-shaped design can effectively cover gaps of different sizes and increase tightness.

【Easy Install 】with no cutting or drilling required.Before installation, make sure that the place to be pasted is dry and clean.The product is 30 feet [9 meters long] long enough to fit four wheels.