Best Fire Hose Fittings in 2026

✅ PREMIUM MATERIAl - Brass for corrosion resistance, ductility at high temperature and low magnetic permeability. And brass fire hydrant adapters are more heat-resistant than aluminum rigid fire hose and hydrant adapters

✅ RIGHT SIZE - 2-1/2" National Standard Thread (NST) female on one end for connecting to the hydrant and a 3/4" Garden Hose Thread (GHT) male on the other end for connecting to a hose. Brass fire hydrant to garden hose adapter is perfect for attaching to fire hydrant

✅ EAST TO USE- Pin type lugs for quick connect and disconnect, easy to use. Brass fire hydrant hose adapters will not rotate as a hose is moved, making them less likely to loosen or break

Product Type :Hose Pipe Fitting

Package Dimensions :12.7 cm L X9.652 cm W X5.588 cm H

Package Weight :0.85 lbs

Provide essential protection and resistance to high pressure, temperature, vibration and fire hazard. Design for Motorsport and Racing

Material: PTFE teflon inner Tube with Fire Resistant Stainless Steel Braiding

Operation Temperature Ranges from -40F to 200F. Max PSI: 2000

🚴‍♀️EASY TO USE- Swivel connection reduces stress on hose when connecting. Pin lug for quick connect and disconnect, easy to operate. This fitting would not rotate as a hose is moved, making them less likely to loosen or break. Perfect for attaching to fire hydrant

🚴‍♀️RIGHT SIZE- 2-1/2" National Standard Thread (NST) female on one end for connecting to the hydrant and a 2" NPT male on the other end for connecting to a hose. Great for hooking a hose to a hydrant

🚴‍♀️BRASS MATERIALl- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass garden hose adapter fittings are more heat-resistant than aluminum rigid fire hose and hydrant adapters. Brass garden hose adapter fittings are more heat-resistant than aluminum rigid fire hose and hydrant adapters

⚒【PREMIUM MATERIAL】- Made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. The Fire Equipment Hexagonal Nipple Fitting offer long-term service

⚒【CONNECTION SIZE】- Hex nipple fitting 1-1/2" NH/NST to 1-1/2" NPT double male fire hose adapter. Male 1-1/2 inch NH / NST will only connect to a female 1 1/2 inch NH / NST; Male 1-1/2 inch NPT will only connect to a female 1-1/2 inch NPT/NPSH

⚒【UNIQUE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes

Hex nipple fitting 1-1/2" female National Pipe Taper (NPT) threaded connection on one end and a 1-1/2" male National Standard Thread (NST) or National Hose (NH) connection on the other

Made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Suitable for use in general firefighting applications. With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench

🔧RIGHT SIZE- 2-1/2" National Standard Thread (NST) female on one end for connecting to the hydrant and a 1-1/2“NH(NST) male on the other end for connecting to a hose. Great for hooking a hose to a hydrant

🔧BRASS MATERIALl- Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass garden hose adapter fittings are more heat-resistant than aluminum rigid fire hose and hydrant adapters. Brass garden hose adapter fittings are more heat-resistant than aluminum rigid fire hose and hydrant adapters

🔧EASY TO USE- Pin lug for quick connect and disconnect, easy to operate. This fitting would not rotate as a hose is moved, making them less likely to loosen or break. Perfect for attaching to fire hydrant

Plastic Red Fire Sprinkler Covers

Two Fire Department Connection Caps

Bolts and Nuts Included

Product Type :Hose Pipe Fitting

Package Dimensions :9.652 cm L X6.858 cm W X3.81 cm H

Package Weight :0.6 lbs

Side 1 - Male 1 1/2 inch NH

Side 1 Will Only Connect To A Female 1 1/2 inch NH

Side 2 - Male 1 1/2 inch NPT

Side 1 - Male 1 inch NH

Side 1 Will Only Connect To A Female 1 inch NH

Side 2 - Male 1 inch NPT

Made in the USA

Female Side: 1 inch NH / NST

Male Side: 1 inch NPSH

Made in the USA

Female Side: 1 inch NPT

Male Side: 1 inch NH / NST

【Size】Brass fire hydrant to garden hose adapter with 1-1/2" National Standard Thread (NST) female on one end for connecting to the hydrant and a 3/4" Garden Hose Thread (GHT) male on the other end for connecting to a hose. Perfect for attaching to fire hydrant.

【Material】Brass fire hydrant Hose adapters are made of brass for corrosion resistance, ductility at high temperature and low magnetic permeability, they are more heat-resistant than aluminum rigid fire hose and hydrant adapters.

【Easy Operation】Brass fire hydrant adapters with pin type lugs for quick connect and disconnect, easy to use. These fittings will not rotate as a hose is moved, making them less likely to loosen or break than swivel adapters.

SIZE: Each hose measures 12 inches

RATE FOR 200,000 BTUs per hour

ACME (Type 1/QCC)nut x 1/4" inverted male flare

Adapts NST thread to NPT thread

Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability

Joins 1-1/2" female NST to 1-1/2" male NPT

Made in the USA

Side 1: Male 3 inch NPT

Side 2: Male 2 1/2 inch NH / NST

【Size】Double male fire hose adapter fitting with 2" male National Pipe Taper (NPT) threaded connection on one end and a 1-1/2" male National Standard Thread (NST) or National Hose (NH) connection on the other.

【Easy Operation】Brass fire hydrant hose connector with double male thread and hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench These fire hose fittings will not rotate as a hose is moved, making them less likely to loosen or break than swivel adapters.

【Material】Brass fire hydrant Hose adapters are made of brass for corrosion resistance, ductility at high temperature and low magnetic permeability, they are more heat-resistant than aluminum rigid fire hose and hydrant adapters.

Made in the USA

Female Side - 3 inch NPT

Male Side - 2 1/2 inch NH / NST

Material:Aluminum

Thread Type:Male Pipe Thread, Female Pipe Thread

Lower Temperature Rating: -20 degrees_fahrenheit

Made in the USA

Side 1: Female 2 1/2 inch NH / NST

Side 2: Female 2 1/2 inch NH / NST

PREMIUM MATERIAL: Made of brass for corrosion resistance,the Fire Equipment Hexagonal Nipple Fitting has rust resistance, low magnetic permeability, and can offer long-term service.

ABOUT CONNECTION SIZE: Side 1 - Male 1 1/2 inch NH / NST will only connect to a female 1 1/2 inch NH / NST, Side 2 - Male 1 1/2 inch NPT will only connect to a female 1 1/2 inch NPT or 1 1/2 inch NPSH

UNIQUE DESIGN: Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes, With a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench, Hex nipple fitting 1-1/2" female National Pipe Taper (NPT) threaded connection on one end and a 1-1/2" male National Standard Thread (NST) or National Hose (NH) connection on the other

Male Side - 2 1/2 inch NH / NST

The Male Will Only Connect To A Female 2 1/2 inch NH / NST

Outside Diameter of Male Threads - 3.06"

Durable: Thermoplastic, corrosion resistant and low permeability, including caps and chains.

Size: 2-1/2" male NST threads. 6 Packs.

Anti-theft: The chain prevents the cover from being lost and theft.

Material - Aluminum with a Brass Swivel Nut

Threads - NH / NST

Size - 1 1/2"

A Camlock D with a Gasket, which has been assembled in the Camlock coupler

One female cam coupler end for connecting to male groove adapters and one female NPT thread to connect male NPT thread

NPT threads are designed specifically for the U.S. market