Best Seat Golf Cart Cup Holders in 2026

【Applicable Model Size】U-25 Mounting Bracket is suitable for EZGO Club Car Yamaha golf carts with 1-inch square armrests in the rear seat. NOTE: NOT AVAILABLE WITH REAR SEAT KITS WITH 1 1/8", 1 3/16", 1 1/4" SQUARE OR ROUND ARMRESTS. NOT SUITABLE FOR ICON, EV/EVOLUTION GOLF CARTS.

【Newly Designed Patented Product】Upgraded Stainless Steel Conjoined Triangle Support Frame, Better Load Bearing, Not Easy To Tilt. The Triangular Support Method Is More Sturdiness And Durable, Over Time, And Will Not Bend Due To Arm Pressure.

【High-Quality Materials】High-Quality And Durable, Thick High-Strength Plastic Bottom Plate, High-density Sponge Has Good Resilience, High-Cortex PU Leather Covering, And The Bottom Leather Trimming is Neat And Beautiful. The Mounting Bracket And Mounting Hardware Are Made of Stainless Steel.

Universal fit for most golf cart rear seats, EZ-GO/Club Car/Yamaha. NOTICES: Just only for 1.0 inch ( 25mm ) square tube frame. Not suitable for ICON/Advanced EV/Evolution golf cart models. Not suitable for any golf cart with round bar or frame. Will NOT interfere flip rear seats, if you mount hanging on the outer half of the bars (cup holder is outside the bar) - Please reference the instruction VIDEO.

Upgrade set of 4 stainless support frame ( 2 PCS each side ), Not easy to tilt or broken. More durable.

About the support frame: Integrated construction and no extra screws required. Not easy to loosen over time. Easy installation and more strength than split type. ( As figure 3 shown )

New High Quality Plastic Base Plate Design , More Durable and Long Lasting.Sturdy and not deform easily.It can easily bear the weight of the cup and your hands, and holding firmly.

Universal Fit for Most Golf Cart Rear Seats,include brand EZ-GO/Club Car/Yamaha.And it is the Easy installation type golf cart armrest,you can install it in 10 minutes.

Arm rest work for golf cart and comes as set of 2 - Passenger and Driver Side. You can intall them without drilling or drilling. You will get both kit in the package.

This stroller cup holder designed to keep the cups secure and safe from spilling or falling off. With this bottle holder , your drinks will within your reach when you walking on the park or cycling outside.

Compatible with most baby strollers, bicycles, walker, wheelchair, scooter on the market.

The clip can be rotated 360 degrees. So it can be fitted on any angle. It can be fitted on handle bar, under seat, down tube, fork, front pipe.

High quality leather - Made with high-quality leather, our Golf Cart Rear Seat Armrest delivers superior comfort and durability.

No drilling required - Our products are available for both drilled and non-drill installation, protecting your golf cart from the fate of drill holes while maintaining strength and stability.

Removable cup holder - The removable cup holder design makes it easy to clean and maintain. It also helps you stay hydrated during your game.

Easy installation,can be installed either by drilling thru the arm rest or use the non-drill brackets that are included in the kit. (please double check the holes on the template before you install these arm rests)

The Support Frame only Fits 1 inch;The four upgrade powerful support frames can make the armrest not tilt,deform or move,establish strict quality control standards and conduct tests,improve the service life and comfort.

Universal arm rests for most golf cart makes and models with a rear seat kit (EZGO, Club Car, Yamaha, STAR, etc.)

𝐔𝐧𝐢𝐯𝐞𝐫𝐬𝐚𝐥 𝐅𝐢𝐭: Huskey golf cart arm rest drink/Cup holder fits most seat kits in the market. Our no-drill brackets are designed for 1-inch square tubing. Can be installed on larger tubing by drilling holes in the rear seat arm rest.

𝐂𝐨𝐦𝐟𝐨𝐫𝐭 𝐅𝐨𝐫 𝐏𝐚𝐬𝐬𝐞𝐧𝐠𝐞𝐫𝐬:Huskey golf cart back seat arm rest adds comfort to your passengers’ ride. Our golf cart rear seat cup holder allows your passengers to safely store their beverages while driving. Cup holders are removable and can be cleaned. These golf cart arm rest with cup holders adds style and functionality to your cart.

𝐂𝐨𝐧𝐭𝐞𝐧𝐭𝐬: 2x golf cart arm rests with cup holder and the following hardware (4 brackets, 4 hex head bolts, 4 Philips head screws, 4 flat washers, 4 lock washers, 4 NY- lock nuts, installation instructions.

【Applicability】Golf cart armrest set with cup holders universal Fit for EZGO Club Car Yamaha. Must ensure that there is a mounting frame of your golf cart, only suitable for the rear seat.

【Arm Restset Kit】One set contain:2 cross large head bolt, 2 washer ,2Non-slip nut ,2U-shaped bracket , 1 shoulder hex Bolt, 1 split washer and more.You will get both kit in the package.

【Environmental Protection】Club cart drink holders are removable to clean and change which is easy to repeated use.

New Aftermarket Golf Cart / UTV Universal Plastic Cup Holder Inserts for propane cylinders / Oversized cup holder

Designed to hold the 16.4 oz propane tank used in many heaters ~ Compatible with MANY propane cylinders and many other brands of portable propane cylinders / heaters ~ Direct replacement, perfect fit into your current cup holder ~ Tapered design – holds multiple cup sizes

Perfect fit for your Golfcart – Open Bottom design for drainage ~ Measures Approximately: Overall Height: 5.75 inches / Inside Diameter: 3-15/16 inches - see images for more dimensions

🥤 UNIVERSAL FIT: Universal golf cart cup holders for rear seat for most EZ-GO/Club Car/Yamaha golf carts. Fit all sizes and different brands of the rear flip seat. (Notes: Just for 1.0 inch ( 25mm ) wide square tube frame Only.)

🥤 NO DRILLING REQUIRED: Golf cart armrest with 4 stainless no drilling triangle support frames. Installation takes just 10 minutes with a Phillips screwdriver. Easy to install or disassemble.

🥤 UPGRADED STABLE TRIANGLE: As we know the triangle support is the most stable structure in the world, More sturdy and durable, the golf cart arm rest with cup holder will not tilt even if an adult rests an elbow on.

Replacement golf cart cup holder insert

Black & green color cup holders - You’ll have a safe holder for your heater and propane cylinder and at the same time, you can use the other cup holder insert as a regular cup holder

For 16.4 oz propane cylinder, multiple sized cups

[Universal Fit]: This set of 2pcs Golf Cart Rear Seat Arm Rests with Cup Holder features a versatile design for a universal fit in the rear seats of most golf carts, enhancing safety and comfort

[Comfortable]: Features a high-density sponge with soft-touch PU leather covering for an elegant appearance, allowing the passengers to rest their arm comfortably while offering a comfortable holding while getting on/off the cart

[Easy Installation]: Comes with all installation accessories and tools such as screws and a paper alignment template, ensuring easy and precise drilling and enabling stress-free installation within minutes

THIS PRODUCT IS GOLF CART WHITE TO MATCH MFG WHITE SEATS - NOT A PURE OR BRIGHT WHITE

𝐔𝐧𝐢𝐯𝐞𝐫𝐬𝐚𝐥 𝐅𝐢𝐭: Huskey golf cart arm rest drink holder comes with a universal fitting and fits all type of electric & gas golf carts. 𝗧𝗵𝗲 𝗯𝗿𝗮𝗰𝗸𝗲𝘁𝘀 𝗮𝗿𝗲 𝗱𝗲𝘀𝗶𝗴𝗻𝗲𝗱 𝗳𝗼𝗿 𝟭 𝗶𝗻𝗰𝗵 𝘀𝗾𝘂𝗮𝗿𝗲 𝘁𝘂𝗯𝗲.

𝐁𝐨𝐱 𝐈𝐧𝐜𝐥𝐮𝐝𝐞𝐬 The package comes with two armrests with a cup holder that fit ezgo, club cars, Yamaha golf carts.The arm rest is made of high-quality 𝗠𝗮𝗿𝗶𝗻𝗲 𝗴𝗿𝗮𝗱𝗲 𝘄𝗼𝗼𝗱 𝘄𝗶𝘁𝗵 𝗮 𝗣𝗨 𝗖𝗼𝘃𝗲𝗿. The cup holders are also made of durable and non-breakable plastic.

𝐂𝐨𝐦𝐟𝐨𝐫𝐭 𝐅𝐨𝐫 𝐏𝐚𝐬𝐬𝐞𝐧𝐠𝐞𝐫𝐬:Huskey golf cart back seat arm rest adds comfort to yours passengers ride. The golf cart rear seat cup holder allows them to place their beverages and drinks in it. Cup holders are removable and can be cleaned. These arm rest with cup holders for golf cart gives a new stylish & elegant look to your cart.

✔HIGH-QUALITY MATERIAL: Manufactured from high quality ABS material,is exquisitely crafted and has smooth edges. Cartclan golf cart cup holder is durable, sturdy, wear-resistant to use.

✔PERFECT FITMENT: 1993-Up Club Car DS Gas & Electric Golf Cart. Remember to Double Check Your Cart Models Before Purchase. Package Content: DS water cup holder 1016811/101708301*1 + DS water cup holder U-shaped lock nut 1016952*2 + DS water cup holder hex screw 7847*2.

✔REINFORCED DESIGN: Our golf cart cup holders allows you and your passengers to safely store their beverages while driving. Unique skeleton design does not cause water to accumulate. Easy to install and the cup holder is also detachable and easy to clean the dust.

✅【Applicable Model Size】Golf cart rear seat armrest cup holder fits EZGO Club Car Yamaha which has 1" (25 mm) square armrest tube golf cart. Not applicable to round tube and ICON, EV/Evolution golf carts.

✅【Upgrade Support Frame】Rubber gaskets are added to the inside of the bracket, not only non-slips, but also protects the original armrest bracket; welded hexagon nuts on support frame for easier installation.

✅【More Stable Design】4 pieces of upgraded one-piece triangular supports frame that is more stable and durable, club car armrest cup holder will not tilt due to arm pressure.

【Models✔】Golf Bag Attachment Fits Club Car DS 2 seat 1987-Up Gas & Electric Golf Carts.

【Package Included✔】1X Golf Bag Attachment; Includes Bag Strap and Locking Buckles,Very sturdy with Black finish.

【Replaces✔】OEM#1013935. Please carefully check the vehicle model before purchasing.

【Cutomer Serive and Notice】Contact us to get the installation if you receive the item without any instructions. New and old instructions random delivery. If you receive the old instruction, please tell us and we will solve your doubts

【Cup Holder】It is removeable and easy to clean. It is very convenient for passengers to place their drinks in the cup holder. It will not take up the position of the rear seat. Flip seat also fits perfectly. Make the rear seat passenger more comfortable.

【High Quality Material】New High Quality Plastic Base Plate Design, More Durable and Long Lasting. High density sponge with good resilience, not easy to collapse. Premium PU Leather, waterproof anf easy to clean. Products Are What You Can Expect From.

Smart Parts Co Golf Cart Armrest fits most Rear Seat Kits

Quality meets style - features sleek, padded beige vinyl with quality stitching and cup holders

Easy to install hardware included

★Fits Club Car DS 1993-up golf cart.

★Package includes:1×DS water cup holder 1016811/101708301,2×DS water cup holder U-shaped lock nut 1016952,2×DS water cup holder hex screw 7847.

★Replaces OEM Part Number:1016811,101708301.

(Notes: For the blinkers turn signal function. your cart must be equipped with signals to wire these side mirrors directly in to your cart.)LED Turn Signal：7 x 5.1 inch large rearview mirrors with hidden LED marker light on mirror and LED indicator on back of mirror for oncoming traffic. Provide you more safety during drive in daylight and night.

Enhance Safety - LED golf cart mirrors mount to your golf cart so you can see behind and beside you. Providing 180° rearview to you and enhance your and your family's safety.

Universal golf cart cup holders for rear seat: For most of EZ-GO/Club Car/Yamaha golf carts. Fit all sizes and different brands of rear flip seat. (Notes: Just for 1.0 inch ( 25mm ) wide square tube frame only.)

Universal to fit all Golf Cart models

Yellow and Black

2-tone colored padded arm rest with built in cupholder.

Xislet fast drying golf cart cup holder is made of high-density nylon gridding cloth for weather-resistant durability, washable can dry easily and quickly for frequent use

Club cart bottle holder pipe clamp can be adjusted 360 degree angles for installation, suitable for vertical, horizontal, and sloping railings, can be moved to a new location quickly and easily

Ezgo drink holder can hold bottles up to 32oz and 3.6'' maximum diameter, such as cans of beer, large cups, coffee mug, soft drinks, stainless steel bottle, sunglasses, towel, rangefinder, etc

Beige / Buff Rear Seat Arm-Rest Cushion with Cup Holder

Comes with template and bolts for easy 10-15 minute installation

Club Car Precedent Beige/Buff Color

2pcs PU covered padded armrests with cup holders.

Universal fit for most golf cart's rear seats.

Drilling is required, templates and screws are included.

【Broad Compatibility】Kemimoto Cup Holder is designed with 360-degree adjustment and excellent adaptability, making it compatible with desks, gaming tables, chairs, pontoons, golf carts, and other indoor as well as outdoor scenarios.

【2 in 1 Large Capacity】Cup holder storage box has a two-in-one design. The cup holder part can hold 18-40oz cups and the large storage box part can carry 3KG. Furthermore, the cup holder has an opening design to accommodate mugs with handles. Easy to handle!

【Strong Stability】The cup holder has 4 built-in petal pads and 2 bottom pads to prevent slippage. The cup holder's tight grip relieves any worry that the bumps on the golf course may cause your cup to fall.

High Reliability: This rear seat arm rest cup holder is made from solid and sturdy material, and its bases is consist of high strength polyethylene composite materials, which is very stable and firm.

Fitment: Our rear seat arm rest cup holder is widely suitable for 1.0in (25mm) square tube frame, and not suitable for any golf cart with round bar or frame, it is a perfect replacement for E‑Z‑GO; Replacement for Club Car; Not suitable for ICON Advanced EV Evolution golf cart models.

Longer Lifespan: Our arm rest cup holder is both friction resistant and waterproof, so it is not easy to crack, and can be used for a lasting time.

New High Quality Plastic Base Plate Design , More Durable and Long Lasting.Sturdy and not deform easily. Golf Cart Rear Seat Armrest can easily bear the weight of the cup and your hands, and holding firmly.

Our Golf Cart Rear Seat Armrest is Universal Fit for Most Golf Cart Rear Seats,include brand EZ-GO/Club Car/Yamaha.And it is the Easy installation type golf cart armrest,you can install it in 10 minutes. The no-drilling bracket is for a 1" square bar only. For a round bar or square bar larger than 1 inch, drill your own holes. Any inconvenience, please contact us,we will reply in 24 hours.

10L0L Newest 4 Passenger Golf Cart Cover is made of the high strength 400D polyester fabric with PU water-proof layer coating. Maximum tensile strength of up to 20 MPA. Durable and storger than other golf cart cover in market. The silver coating has a good effect on protection of the sunlight from aging your golf cart.

High Reliability: This rear seat arm rest cup holder is made from solid and sturdy material, and its bases is consist of high strength polyethylene composite materials, which is very stable and firm.

Fitment: Our rear seat arm rest cup holder is widely suitable for 1.0in (25mm) square tube frame, and not suitable for any golf cart with round bar or frame, it is a perfect replacement for E‑Z‑GO; Replacement for Club Car; Not suitable for ICON Advanced EV Evolution golf cart models.

Longer Lifespan: Our arm rest cup holder is both friction resistant and waterproof, so it is not easy to crack, and can be used for a lasting time.

High Reliability: This rear seat arm rest cup holder is made from solid and sturdy material, and its bases is consist of high strength polyethylene composite materials, which is very stable and firm.

Fitment: Our rear seat arm rest cup holder is widely suitable for 1.0in (25mm) square tube frame, and not suitable for any golf cart with round bar or frame, it is a perfect replacement for E‑Z‑GO; Replacement for Club Car; Not suitable for ICON Advanced EV Evolution golf cart models.

Longer Lifespan: Our arm rest cup holder is both friction resistant and waterproof, so it is not easy to crack, and can be used for a lasting time.