Best Positive Gun Holsters in 2026

Passive retention detent adjustment screw and SERPA Auto Lock release

Reinforces full master grip and superior draw technique

Immediate retention and audible click upon re holster for security

Premium Leather IWB (Inside The Waistband) for 2", Snub Nose Concealed Carry Size Revolvers. Lightweight; open style; ultimate concealment.

Belt clip slips over pant top and belt to hold gun securely and anchor gun for positive draw. Wear it strong-side, cross draw or on the small of the back.

Accepts belts up to 1 3/4" width. The picture shows a right hand draw- strongside (right side) holster.

Minimal to zero "drag" until retention point keeping "holster wear" down to a minimum.

Comes with a 1.5" Quick Clip that makes it extremely fast and easy to put on and take off your weapon.

Adjustable cant (angle) from 0-30 degrees. Forward hole is oblong to allow for you to choose any angle between 0-30 degrees.

Ultra-thin four-layer laminate no thicker than conventional suede leather holsters

Internal moisture barrier won't transmit perspiration to gun

Smooth nylon lining for easy draw

Design and function: These Molle compatible locking belt clips are designed for attaching knife sheaths, gun holsters, mag pouches, flashlight holsters, emergency kits, and much more to any gear with a Molle compatible strap system. In addition, they also work quite well with virtually any item where a strap or belt is available for mounting to. This design, and its attachment hole mounting patterns, allow for both vertical and horizontal carry (and practically any angle in between).

Extreme attachment security: These Molle compatible belt clips can be unlocked and removed via a one-handed spring lock release. This same release has a built-in spring loaded slide-lock to secure the mounting to your belt, molle strap, or webbing. The Molle Compatible Belt Clip design is rugged and secure. The closure and spring safety "snap" in place in the locked position with positive authority. Once locked, the holster, sheath, or magazine pouch is secured tightly.

Super strong: Made from durable nylon polymer, HolsterSmith Molle Compatible belt clips are virtually indestructible. Each Molle lock compatible belt clip belt attachment features pre-drilled mounting holes that can be used as-is with standard hardware (see offer), or further drilled to a wider diameter to allow existing holster mounting posts to be used on holsters where these belt clips are being upgraded to improve original holster mounting.

COMPATIBLE MODELS - This holster is designed specifically for your Sig Sauer P365 & P365 XL models, chambered in 9mm & above. It does not fit other models. Please make sure to purchase the right holster for your model as it won't fit other models.

BREAK-IN PERIOD - These holsters are like a pair of new shoes. They are sturdy and fit well, but we suggest you use them for a couple of days so they can adjust to your gun. You will see that they start fitting great with time.

INJECTION MOLDED VS KYDEX - Q-Series holsters are injection molded. They are both strong and durable, but Kydex tends to deform with heat, while injection-molded polymer construction is lightweight and guarantees a perfect fit every time.

Design helps anchor holster inside pants or skirt/dress; Ultra-thin four-layer laminate that is no thicker than conventional suede leather holsters. Internal moisture barrier won't transmit perspiration to gun. Lightweight; open style; ultimate concealment.

Barsony New Gun Concealment Inside The Waistband Holster is compatible with gun make/model sizes listed in the drop down menu. Premium leather backing for belt clip carry. Wear it strong-side, cross draw or on the small of the back.

Belt clip slips over pant top and belt to hold gun securely and anchor gun for positive draw.

Barsony Gun Concealment Pocket Holster

Keeps your gun secure in the upright position in your pocket and anchors the gun for positive draw.

Constructed from premium Cordura nylon using precision stitching.

Barsony Concealment IWB Holster for S&W M&P Shield with Laser. This holster fits Laser Max Centerfire and Crimson Trace LG-489 lasers for S&W M&P Shield. Ultra thin four-layer laminate that is no thicker than conventional suede leather holsters. Internal moisture barrier won't transmit perspiration to gun.

LIGHTWEIGHT, OPEN STYLE, ULTIMATE CONCEALMENT. HIGHEST QUALITY CORDURA NYLON WITH PRECISION STITCHING. STRONGEST STEEL BELT CLIP IN THE INDUSTRY.

Barsony Concealment IWB Holster is compatible with gun make/model sizes listed in the drop down menu. Belt clip slips over pant top and belt to hold gun securely and anchor gun for positive draw.

Barsony Leather Gun Concealment Pocket Holster

Keeps your gun secure in the upright position in your pocket and anchors the gun for positive draw.

Constructed from quality U.S. Cowhide Leather using precision stitching.

Barsony Leather Gun Concealment Pocket Holster

Keeps your gun secure in the upright position in your pocket and anchors the gun for positive draw.

Constructed from quality U.S. Cowhide Leather using precision stitching.

INSIDE THE WAISTBAND KYDEX CONCEALMENT HOLSTERS. Minimalist IWB holsters are designed to be carried with the maximum comfort and safety in everyday IWB concealment carry while ensuring safe concealment, portability with safe and expected retention.

We use the best materials such as 0.08" thick KYDEX and Precision-Molded Designed by us using Computer-Aided Design (CAD) and manufactured using vacuum forming with molds made of Aluminum and/or RENSHAPE 460

HOLSTER FEATURES: The actual cut, measurements of separation, and the height of the holster on the individual belt is purposely designed for concealment, comfort, and positive retention. Featuring our easy to position NYLON 6 belt attachment that supports belts up to 1.5” wide which designed to allow each individual to adjust the cant up to 20 degrees for more comfortable position. A full length sweat guard is designed into our holster for complete separation of the firearm from the user’s body

Barsony Leather Gun Concealment Pocket Holster for Small .22 .25 .380.

Keeps your gun secure in the upright position in your pocket and anchors the gun for positive draw.

Constructed from quality U.S. Cowhide Leather using precision stitching.

Compatibility-The Inside waisted holsters compatible with Glock17/19/19X/26/44/45 Gen(1-5) & Glock 23/32 Gen(3-4), accommodate wide variety of optics, open muzzle cut for various compensators, please adjust the retention by simply tightening or loosening screws on the holster body to make the holster fit like a glove when you first use it

Concealed Carry Holster-Adjustable ride,fit for your daily concealed carry, easy to conceal since the IWB holster sit close to the body and less likely to print, available with claw,each claw comes complete with a spine, 2 interchangeable riser inserts,it can be configured for RH or LH carry,there are 2-3mm difference made holster more concealable when carrying, and you can easily install or unload the claw to your needs

All Day Comfort-Ergonomic design,the holster allows adjustment of the angle of cant from -20 to +20 degrees, whether it is appendix, strong side, behind the hip or cross carry or any carry draw,you can find the perfect position for your comfort,and fully cover the trigger,prevent it hurt your skin accidently

USA Made: Produced with high strength, heat resistant polymer in the USA. This Blade-Tech Precision molded Sig P365 Holster has a superior fit to Kydex. Carry Confident and conceal your Sig P365, P365 SAS, or P365X securely and comfortably.

Easy On / Easy Off: This one piece IWB Sig P365 Holster makes it simple to attach to your belt with an easy on / easy off 1.5" belt clip. The Klipt IWB Holster is a great option for everyday IWB concealed carry of your Sig P365, P365 SAS, or P365X without all the bulk.

Positive Lock Trigger Guard: The Klipt IWB Holster for the Sig P365 is designed with built in retention and a positive trigger lock guard so your firearm stays secure with no adjustments needed. Its minimal design means no tightening or loosening screws for retention.

US ORIGINAL KYDEX: Our IWB holsters are made of lightweight heavy-duty US original .08” KYDEX, designed to fit Smith & Wesson 9mm/.40 M&P Shield with the 3.1" Barrel (ONLY unless Specified) without Light or Laser Attachments, and to be worn comfortably inside the waistband for concealed carry. DO NOT fit for 9mm/.40 M&P Shield M2.0. Total weight: 2.6 oz.

ADJUSTABLE RETENTION & CANT: Audible clicking sound when your pistol is securely holstered for positive retention assurance. The retention pressure is fully adjustable by loosening or tightening the hex nut on the holster with enclosed Allen Wrench, for fast and smooth draw. The Cant (or Carry Angle) is easily adjustable from -5 to +20 degrees, allowing you to angle the holster perfectly for appendix, on hip, behind hip or cross draw carry positions.

CARRY WITH CONFIDENCE: Fiber Reinforced Stealth Belt Clip, so no one knows you are carrying. The belt clip fits belt width up to 1.5". It is easy to use, and also durable to keep your holster in position to secure your pistol and keep you safe with confidence in any situation.

OUTSIDE THE WAISTBAND KYDEX PADDLE HOLSTERS fits your Fits Smith & Wesson M&P 5" Barrel (Right Hand Only). Our minimalist OWB PADDLE HOLSTER is designed to be carried with the maximum comfort and safety during everyday OWB concealment carry while guaranteeing a quick draw, safe concealment, portability with safe and expected retention.

HOLSTER FEATURES: Our OWB Paddle Holster is designed for people who wear the OWB holster and are able to put it on without having to remove the belt and to be able to remove it in a fast, comfortable, safe manner. Our designed paddle system is very comfortable to wear all day and is made in INJECTION MOLD using Nylon 6 material and can be used with 1.5 to 2” belt while still providing you with adjustment angles of -45 to 45 degrees, making it one of the most versatile and functional holsters.

ADJUSTABLE ‘POSI-CLICK’ RETENTION: The holster provides a Positive Lock Trigger Guard audible click to ensure the user of positive retention. Our holsters also provide you with adjustable retention to allow each user to set it to their expected levels using the provided black oxide steel hardware. The Speed Cut provided on these holsters allows the user the fastest draw possible.

MADE IN THE USA - Ayin Tactical's Holsters are handmade and constructed of 4332 Boltaron. This alternative material has a wider temperature range before cracking under arctic cold or deforming in high heat environments.

LIFETIME WARRANTY - We make sure that each and every holster that we produce is physically tested with an actual firearm to ensure a perfect fit and retention every time. We don't use replica firearms to make any of our holsters. This way we know you will have a perfect holster for life!

TWO IN ONE - Can be used both Inside the Waistband and Outside the Waistband. No need for a drawer full of unused holsters (you know what I'm talking about).

.08" Black Carbon Fiber Kydex

Adjustable Cant Angle ( 0-15 degrees) & Positive Click Retention

Adjustable Retention

【Full Cover Trigger, No Scratch, No Jitter】 The holsters for Sig Sauer P365 / P365 SAS / P365X full covering all access to the trigger,securely retained with minimal drag，which can avoid all possible accidents. Rounded, Hand Finished Edges,adds to a layer of comfort without digging into the body or thigh,he trigger guard is intentionally undercut to promote a higher grip on the P365 and allow for magazine release while the firearm is fully holstered.

【FIT LIKE A GLOVE WITH AN AUDIBLE CLICK】Thanks to the Adjustable Retention Screw, you can dial in perfection with a Phillips Screwdriver. The inherent positive retention “positive click SNAP”sound,ensures the firearm is secure when holstered.

【Adjustable Cant & Retention Pressure】The cant settings are easily adjustable from 0 to 30 degrees. Be it appendix, strong-side, kidney carry, it allows for a perfect grip on the Sig Sauer P365 / P365 SAS / P365X

Keeps your gun secure in the upright position in your pocket and anchors the gun for positive draw.

Constructed from premium Cordura nylon using precision stitching.

AMBIDEXTROUS: for right and left hand use. Perfect for handbag, purse or backpack carry.

USA MADE: Produced with high strength, heat resistant polymer in the USA. This Blade-Tech Precision molded CZ 75 SP-01 Holster has a superior fit to Kydex. Carry Confident with your CZ 75 SP-01 securely and comfortably.

COMPATIBILITY: This CZ 75 SP-01 Holster features our versatile mounting pattern which makes it compatible with a huge selection of attachments. The Signature Holster is a great option for everyday Outside the Waistband carry of your CZ 75 SP-01. This holster comes with our Tek-Lok belt attachment which allows you to get a tight hold on belts from 1.5” to 2.25".

POSITIVE LOCK TRIGGER GUARD AND ADJUSTABLE RETENTION: The Signature OWB Holster for the CZ 75 SP-01 is designed with adjustable retention and a positive lock trigger guard. Adjustable retention screws can tighten or loosen the fit of the holster around your firearm while the positive lock trigger guard provides tactile feedback to let you know your firearm is secure.

Barsony Leather Gun Concealment Pocket Holster for Small .22 .25 .380.

Keeps your gun secure in the upright position in your pocket and anchors the gun for positive draw.

Constructed from quality U.S. Cowhide Leather using precision stitching.

Durable and long lasting

Reinforced thumb break for positive snap release

Handcrafted, premium high-quality leather, perfectly shaped and molded to the gun

Handcrafted, premium high-quality leather, perfectly shaped and molded to the gun

Reinforced thumb break for positive snap release

Durable and long lasting

Includes interchangeable belt loop

Sleek profile design for optimum concealment

Handcrafted, premium high-quality leather

USA MADE: Produced with high strength, heat resistant polymer in the USA. This Blade-Tech Precision molded Glock 19 Holster and double mag pouch has a superior fit to Kydex. Carry Confident with your G19, G19X, G44, G45, G47 (Gen 3, 4, 5), G23, or G32 (Gen 3 & 4) securely and comfortably.

COMPATIBILITY: This Mag Pouch features adjustable retention screws allowing for fitment of many different models. This one Mag Pouch will accommodate mags for the: Beretta APX 9, Caracal 9, CZ TS2, FN 509, FNS 9-40, Glock 17, 19, 22, 23, 24, 25, 26, 27, 28, 31, 32, 33, 34, 35, 37, 38, 39, 47, and H&K USP Fullsize 9-40.

POSITIVE LOCK TRIGGER GUARD AND ADJUSTABLE RETENTION: The Signature OWB Holster for the Glock 19 is designed with adjustable retention and a positive lock trigger guard. Adjustable retention screws on the Signature Double Mag Pouch can tighten or loosen the fit of the mag pouch to your desired retention level while accommodating a large array of magazines.