Best Lyman Gunsmithing Tools in 2026

ACCURACY: +/- 2 inch/pounds up to 40 inch/pounds; 40 – 65 is +/- 5%. The FAT wrench measures 2 L x 2 W x 6.25 H inches and the storage case measures 7.5 L x 5.5 W x 1.75 H inches

EASE OF USE: Apply, repeatable, accurate torque settings to scope rings, guard screws, windage screws and base screws, which aids in accuracy and decreases the opportunity for problems in the field

RELIABLE: Torque adjustment range from 10 inch/pounds to 65 inch/pounds

ESSENTIAL GUNSMITHING TOOLS designed with Real Avid’s ingenuity: Accu-Punch Hammer and STANDARD PUNCHES Set paired up with innovative Smart Bench Block

GUNSMITHING HAMMER: adjust to the situation with interchangeable hammer heads: easily switch between steel, brass, rubber, and nylon; grip confidently thanks to ergonomic, rubberized handle – all to allow for maximum control and precision while tapping pi

STANDARD, FLAT TIP PIN PUNCHES FOR ANY GUN: hardened steel, nickel plated flat tip punches for driving out solid pins

VERSATILE: Wheeler’s engineers measured the screws on over one hundred modern and antique firearms to make sure that we offered bits for every situation

FEATURES: (54) hollow-ground flat bits, (15) specialty bits, (8) Allen, (4) Phillips, (3) Torx, (1) 2 ¼ shaft extension and (1) hex-to-square drive adapter

EASE OF USE: Hollow-ground bits have a concave shape that allows for insertion all the way into the screw slot for maximum contact

EASE OF USE: This Wheeler trigger scale features a digital screen for clear results

CONVENIENT: With an audible indicator tone, you’ll know when the Wheeler Digital Trigger Gauge is done

RELIABLE: Accurate measurements with 1 oz increments

55 piece Hex/Torx screwdriver set includes, sae Hex, metric Hex, Torx and Phillips heads

Includes sae Hex bits- .028", .035", .05", 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8"

Includes metric Hex bits- .7mm, .9mm, 1.3mm, 1.5mm, 2M, 2.5mm, 3mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 10mm

DIMENSIONS: 1 1/4" H x 4" Diameter

EASE OF USE: Two-sided tool features all channels and holes needed to add or remove parts from most handguns

VERSATILITY: Works perfectly for assembling and disassembling 1911s as well as 10/22s

Rear sight pusher will work with 90 degree and 30 degree rear sight profiles. Sig Sauer, H&K, CZ, Glock, S&W, and more.

Both side witness windows tool frame to check sight alignment

Sight tool frame can be bolted to, clamped onto work surface, or clamped onto a work vice

Multipurpose Design: These 6" nylon vise jaw pads are designed for you to use either the flat or grooved side to protect and hold your workpiece from your metal bench vise. Plus, our vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items securely in place.

Extra Compatible: Our nylon vise pads are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories.

Protects Delicate Surfaces: Our bench vise jaw covers are made from durable nylon which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These nylon vise pads are ideal for woodworking, gun-smithing, jewelry making, and more.

🔧【Durable in Use】 Made of 40# chrome vanadium steel with special heat treatment. Ideal punch tool for jewelers, watchmakers, and carpenters. Used for machinery, vehicles, woodworking and craft repair. After many experiments, we found that the pin is the most easily damaged part of a whole set of our punch set, so we have made numerous modifications to provide you with excellent quality pin punches, so that you can avoid the abandonment of the whole set of punches due to the breakage of one pin.

🔧【All-IN-1 Set】Includes everything you need to get started and suitable for everyone, whether you're a novice or a veteran. This punch set includes 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" and 5/16". 2Pcs 3/8",15/64" plastic pin punches; 1 metal tweezers and 1 hammer with 4 detachable hammer heads; 4Pcs hollow end starter punch set including 1/16”,5/64”,3/32”,1/8”; 2 Pcs flat pin punches including 1/16" and 3/32"; 2 Pcs roll pin punches including 1/16" and 3/32"; 8Pcs carbon steel punches.

🔧【Detachable Hammer】 In use with a chrome-plated steel hammer. In addition, we added 4 replaceable hammer heads (1 brass, 1 chrome, 1 nylon in white and 1 rubber in black), so you can choose the right one for your needs. The hammer has a non-slip design, which can cooperate with you in the process of use can be better grip.

DIMENSIONS: 9.75" L x 5.25" W x 2" D

NON-DESTRUCTIVE: Chrome plated steel hammer has nylon and brass heads to ensure strong, but non-marring contact while in use

BE PREPARED: Features brass, steel and nylon solid punches making it the ideal kit for your workbench

【HAMMER】With bigger and heavier hammer head, the hammer is easier to hit. And the two ends of the hammer are detachable. We provide you 4 interchangeable hammer heads (rubber, brass, steel and nylon), you can choose the appropriate one according to your own needs.

【PUNCHES】All the steel punches are treated specially, which makes it more durable and sturdy than other brands. Pin is the most easily broken part in the whole set. We provide excellent quality pins, so that you can avoid the abandonment of the whole punch set due to the fracture of one pin.

【INCLUDES】A bench block, 1/16, 5/64, 3/32, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4 steel punches, 3/8, 5/16, 15/64 plastic punches, a pin alignment tool, a hammer and 4 detachable hammer heads.

Made From High Quality Materials: Our universal bench block is molded from high-quality, purpose-specific, durable materials to provide a solid, non-marring work surface for gunsmithing on a wide variety of firearms. Built to last through use after use

Suited for A Variety of Firearms: Perfect for disassembling and reassembling handguns. Ideally suited for M1911 / M 1911 / M-1911 -style pistols as well as other firearms (10/22s, Glocks, etc.)

Custom Molded With Professionals In Mind: Notches, grooves and holes on both sides are designed to simplify a variety of tasks on your gun. Simplifies the installation of pins, detents and springs

[DURABLE]: Sturdy Philips, Hex, Slotted, and Torx Bits constructed with S2 Steel for maximum durability.

[EASY TO USE]: Easy to read, set, and offers accurate, automatic tension locking for scope mounting, gunsmithing, maintenance, and more.

[ACCURATE]: Accuracy of +/- 2 in-lbs with a torque adjustment range of 10 to 60 inch-pounds.

DIMENSIONS: 10" L x 2" W x 2.7" H

CONVENIENT: A compact design and storage case makes this screwdriver set easy to keep in a toolbox or range bag

EASE OF USE: Magnetic hollow handle easily accepts bits

The high quality hardened 40# steel, These Pin Punches are heat treated, drop forged, hardened and knurled steel for greater durability, workability, and overall performance.

Pin Punch Set is a great set of tools designed to remove and re-use roll pins without causing major damage to the pins.

8 pcs different size including 1/16”, 3/32”, 1/8”, 5/32”,3/16”, 7/32”, 1/4”, 5/16”, This set is ideal for repairing or servicing, small equipment, machines, and vehicles.

【Nylon & Brass & Steel Bristle Brush】 - Softer nylon & medium bronze brushes are great for removing any fowlings, dirts,residues on surfaces. Steel bristles are hard enough to easily remove any caked on carbon. The thin end is very useful for getting in tight spots to clean well. It will reach into those previously hard to reach spots.

【5 Multifunction Head Pickss】 - Each Double-ended stainless steel pick has different sharped tool at end,and they're potentially useful for different parts of different guns. They work perfectly for reaching into tiny space areas (muzzle brakes,gas blocks,bolt carriers etc) to easily remove any caked on carbon without scratching metal,pry loose tight fitting parts or grip shell case in chamber,more you can imagine.

【Tougher Stainless Steel Picks】 - Have great texture in hand,each pick feels very good in hand and does not slip out.They are much stronger than easily broken off plastic picks,and can use for long time. We also add a plastic pick, much softer than stainless steel picks. You can clean places that need to be carefully cleaned.

Long Lasting Bright Light: If a magnifying glass light does not have excellent lighting, this must be ridiculous! kirkas magnifying lamp advanced 6,000K cool white LED technology with an output of 2200 lumens, Perfectly solve the brightness problem that customers are most concern. Refuse the annoying dim light. High brightness paired with no dizziness real optical 10X glass magnifier lens is most responsible for you.

10X Optical Glass Magnifier Lens: Upgrade 10X HD glass magnifier, magnifying glass with light and stand equipped with a 4-inch diameter real optical glass lens, magnification strength up to 10X, without optical distortion and doesn’t fog like cheap acrylic or plastic lenses, kirkas Magnifying lamp was designed for anyone who needs to constantly focus close up or anyone with vision problem such as aging eyes or macular degeneration. You can see any details clearly and enjoy your work and hobbies

Natural Light Protects Your Eyes: Switch used for changing between brightness levels is designed on the top of the light head, from soft bright to super bright, very convenient. Cold light technology, highly imitating natural light, gives perfect protection to your eyes. When you use the lighted magnifying glass to read books at close range, without creating a glare or eye fatigue. suitable for drawing, reading, crafts, sewing, needlework, beading, electronic repair, studying and other hobbies.

One of each: round, half-round, flat, flat warding, square and triangular file

Dipped handles for comfort and excellent grip when exposed to moisture or fluids

PVC pouch for dust-free storage

ACCURACY: Ensure crosshairs are aligned for in line shot placement and reliable doping adjustments

EASE OF USE: Place the Scope Turret Level on the top scope cap and the Action Level above the bolt; once the levels show a level scope, simply tighten the rings down

VERSATILITY: Works with practically any bolt action rifle and can be adapted to work with other rifle designs

【Double Face Hammer】Chrome plated steel hammer has nylon and brass heads to ensure strong, but non-marring contact while in use. We provide you with 4 interchangeable hammers (rubber, brass, steel and nylon). You can choose the right hammers according to your needs.

【Brass】8Pcs roll pin punch including 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" and 5/16" ，Made of brass for use with surfaces that may be damaged by steel punches.

【Hollow End】4Pcs hollow end starter punch set including 1/16”, 5/64”, 3/32”, 1/8”.

DIMENSIONS: 2" H x 8" W x 6" D

NON-DESTRUCTIVE: Chrome plated steel hammer has nylon and brass heads to ensure strong, but non-marring contact while in use

BE PREPARED: Features various sized punches making it the ideal kit for your workbench

Whatever your skill level. Whatever your needs. We have a professional-grade gunsmith tool kit for you. If you are an accomplished gunsmith, the 88-piece Deluxe Tool Kit is right up your alley

There’s a punch set, hammer and bench block added to the Multi Bit for a complete kit for the professional or at-home gunsmith. Each kit comes with quality bits and driver.

Includes high-quality steel punch set with multiple sizes to fit a variety of pins. Hammer features brass and plastic faces for precision adjustments

【Hammer】We value our customers' purchasing needs, we have conducted hundreds of experiments and strict quality checks on our hammers ,We upgraded the material of our hammers, which will not break, more durable and stronger than other similar hammers.4 kinds of interchangeable hammer,with detachable brass, steel, nylon and rubber heads to meet your different needs.

【Punches】We use high quality and strong punches that are not light weight, bendable and mismatched like other cheaper products.4 Pieces hardened chrome-vanadium steel roll pin punches including 2 pieces 1/16"and 2 pieces 5/64", 4 hollow end punch kits with sizes of 1/16", 5/64", 3/32", 1/8". Brass punches with sizes of 3/16", 7/32", 1/4", 9/32", 5/16". Steel punches with sizes of 1/8", 9/64" and 5/32".

【Magnetic Bench Block】1.Made of non-marring polymer to protect your gun from scratches during use 2.Rubber coated block is non-slip so that make it more stable on your table.3.Magnetic bench block helps catch pins and other small parts better（Note: Only one corner is magnetic.）

WEEKENDER PROFESSIONAL GUNSMITH KIT - For those needing essential tools on hand, the Birchwood Casey Weekender Professional Gunsmith Kit provides many of the basic implements for tackling weekend work done on the field and range guns

READY TO WORK - Featuring 27 professional gunsmith selected tools, this Kit has everything the at-home gunsmith needs; From the basics of mounting a scope to the complexities of model specific gun maintenance it is ready for completing your gunsmith tasks

FULL PACKAGE - This versatile Kit comes in a reusable hard case to keep tools well organized and includes one each - Nylon and Brass Faced Hammer, Precision Phillips, Precision Flat Screw Driver, Long Shank #2 Phillips, Synthetic Punch, Phillips Size #1

【EASY TO USE】Nylon face of the brass hammer is non-marring and great for alignment

【HIGH-QUALITY MATERIALS】This rubber mallet has 4 replaceable hammerheads, namely rubber, nylon, brass, and aluminum, which can be provided with a different hardness to avoid injury and reduce recoil

【FUNCTION AND COMPATIBILITY】Gunsmith hammer, which is professional for repair and maintenance, Brass face can be used for driving pins and punches

【Package Include】- This roll pin punch set includes a universal gun block, 9pcs different size pin punches and a hammer with 2 spare rubber heads, this perfect gunsmithing kit will definitely accompany you for a long time in countless jobs, saving time and energy.

【Pin Punches】- 9pcs roll pin punches with knurled handle are made of high quality hardened steel, and come with red fitted nylon storage pouch, easy to use, carry, storage and hang.

【Universal Gun Block】- It is made from high quality material, non-marring work surface to avoid the damage of your gun parts, durable in use,Highly useful for gunsmithing.

Multipurpose Design: These soft vise jaws are the perfect tool to hold your workpiece firmly in place and protect it from your metal bench vise. Safely hold any round, flat or irregular metal, plastic or wood objects. Simply change between the grooved and flat vice jaw sets accordingly

Compatibility: Our vise jaws are compatible with a wide variety of tools including vise block, drill press vise, woodworking vise, brass hammer, clamps, bench vise and mill clamps. Add it to your collection of drill press accessories.

Protects Delicate Surfaces: Our soft jaws for bench vise are made from Thermoplastic polyurethane (TPU) rubber which is sturdy enough to hold your workpiece in place but won’t discolor or leave any marks on their delicate surface. These vise jaws are ideal for woodworking, gunsmithing, jewelry making, and more delicate type work.

Provides all the bits needed by gunsmiths and all those who work on firearms

Comes with bits for Slotted screws, Hex screws, 6-lobe screws, and Phillips screws

Includes a Weaver scope ring bit, Glock front sight bit, 1911 grip bushing bit, as well as .062", .093" and .118" pin punches

✔Chrome plated steel hammer has 4 detachable heads: nylon, steel, rubber, and brass to ensure strong, but non-marring contact while in use.

✔Contains brass, steel and nylon solid punches making it the ideal tool kit for your workbench.

✔Includes: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 9/32" and 5/16" brass punches, (2) 1/16", (2) 3/32" steel punches, 15/64", 3/8" composite punches.

Universal handgun sight pusher tool makes a perfect fit for square slides,not for angles or notched slides like XD, XDM or Shield.

Sight pusher tool have vertical adjustment and a Ridged solid jaw to support the slide and not allowing it to easily move in a vertical or horizontal direction while in use.

Sight pusher tool is designed to adjust or replace dovetail handgun sights.