Best Bare Tool Hammer Drills in 2026

Professional and widely use: This drill is equipped with a high torque 5 amp motor that makes it ideal for the most demanding projects; 105pcs accessories cover all your needs and equipped with durable carrying case for easy storage

Speed adjustable: Speed Setting Knob and variable speed trigger allow you to control drilling speed and set speed at 0 - 3000 RPM according to your needs; Lock-on button reduces fatigue for long hours work

1/2 keyed metal chuck: This drill with sturdy and durable metal chuck, its maximum chuck diameter of this impact drill is 1/2''; Customer could replace different drill bits according to different drilling materials

3 DRILLING MODES: Switch between hammer mode (for drilling holes through masonry or concrete), drilling mode (for drilling holes through woods and plastics), and driving mode (for driving screws through pilot holes) so you can make the most of this powerful drill

24 POSITION CLUTCH: Fine tune your torque up to 750 inch pounds with this 24 position clutch, so you can apply light torque for more delicate jobs

MAGNETIC BIT HOLDER: Near the base of the tool is a platform where you can keep bits and fasteners secured to the drill. This way, you can replace bits without having to walk away from your job to your toolbag for different jobs

[Efficient and Durable Brushless Motor] Brushless motors can not only increase the power of your cordless drill, but also extend its lifespan. In addition to reducing vibration and noise, this also improves the portability of cordless drill with battery and charger. Brushless technology has no contact area, greatly reducing wear and maintenance. The powerful brushless motor provides torque up to 531In.lbs. It can perfectly complete screwing and drilling. Suitable for professional and home use.

[1/2" All-metal Ratcheting Keyless Chuck] The hammer drill kit is designed with an all-metal chuck for a greater bit of holding force. Compared with plastic chucks, metal chucks are more durable for heavy duty. With the 1/2" all-metal ratcheting keyless chuck, it provides greater bit retention and increases productivity. Maximum drill diameter: reinforced concrete φ1/2”, wood φ3/2". It can meet construction site reinforcement, drilling use, or daily carpentry work.

[2 Variable Speed & 22+1+1 Torque Setting] The variable speed trigger controls 2 speeds, 0-550/0-2000 RPM. The reverse switch on the body of the cordless drill set allows forward and reverse operation for perfect control. The 22+1+1 torque setting gives the hammer drill a driver, drill, and impact function, three in one. The torque setting provides the ability to drill in hard materials such as wood, concrete, masonry, metal, cinder block or drill ice auger for ice fishing.

All Metal Chuck: The metal chuck is more durable and sturdy than the plastic drill chuck, with longer life time. Allowing you to change a variety of drill bits with ease. The maximum chuck diameter of this impact drill is 1/2'' (13mm).

Hammer & Drill Function 2-in-1: Switch the orange button on the top to select hammer or drilling function by your tasks. Drilling function for drilling holes on steel plates, plastic and wood, hammer function provides greater impact to make the drilling task more efficient and simple on concrete wall and masonry. Please note that this drill can't be used in reinforced concrete walls.

Powerful Motor & Variable Speed: The ENGiNDOT PID01A Corded hammer drill equipped with high efficiency industrial copper core motor, gives more power and durability, designed with variable speed, you’re able to set a suitable speed for different applications from 0-2800rpm.

2-IN-1 IMPACT DRILL AND DRIVER – The Stalwart drill driver is an easy-to-handle and versatile hand tool. Use this 5.0 Amp 120 Volt corded drill to power through wood, metal, and concrete and conquer your toughest drilling jobs.

SMART FEATURES – This impact drill features a two-finger trigger and an ergonomic handle, so you can comfortably tackle any task. It also includes a chuck wrench and holder.

STRONG CONSTRUCTION – This hand tool is built to last. The removable 360 pistol grip handle allows for improved comfort and better overall control.

TWO DRILLING MODES: Switch between hammer mode (for masonry up to 5/8" capacity) and drilling mode (with the ability to tackle wood, plastic, or up to 1/2" of steel) for a variety of applications.

KEYED CHUCK STORAGE: The heavy duty chuck is tightened with a key, stored on an included lanyard. This will make sure that the key isn’t too far away when you need to make a fast bit change.

RUBBER OVERMOLD: Maintain a comfortable grip with the rubber molding over the pistol grip. This gives you maximum control, even in slippery environments.

【BRUSHLESS MOTOR & 530 IN-LBS HIGH TORQUE】 Better than brushed drill, VCANENERGY brushless hammer drill has feature below: More Power & Higher Efficiency; No spark & Lower Noise; Longer Running Time & Lifetime

【1H FAST CHARGER & 2000MAH BATTERY】 Fast charger can fully charge the battery within 1 hour; Battery indicator reminds you current battery level; ETL certified charger with multi-protections. Over charge protection, over current protection, over heat & short circuit protection.

【25+3 CLUTCH & 1/2 METAL CHUCK】 25 Torque Setting delivers accurate torque in different situations; Drill mode, Driver mode & Hammer Drill mode can be chosen; 1/2 Keyless Metal Chuck is more durable than plastic chuck and fit most drill bits

Most Powerful Motor:7 Amp motor offer powerful energy and you can do any drilling tasks including drilling wood/plastic/mental more easily.

1/2 In Key Chuck:The chuck can be release and tight by the lock key and this design is more safe than selft-lock chuck.

More Realiable Design:Also equipped with forward/ backward control and lock on button for your daily working.

【Greenworks 24V Lithium-Ion battery】provides 20% more power and 35% more run-time versus 20V competition, and delivers fade-free power with no memory loss after charging.

【1/2 In. Hammer Drill/Drill Driver】Hammer Drill/Drill Driver 20 + 3 Position Clutch & 2 Speed Settings (0-450RPM/0-1750RPM) with variable speed trigger provides precision control for drilling holes and fastening in a variety of materials. Hammer setting provides powerful drilling through concrete, brick, and block.

【Highly efficient brushless motor】provides more power, torque, quiet operation, and longer motor life.

[2 In 1 Gasoline Hammer]: 22 3/8"x11"x12 3/16" gasoline hammer features 6500r/min max speed and impact frequency up to 2230/min for providing powerful impact force; pile driver for farmland fence and highway guardrails piling and comes with point chisel for concrete & stone breaking and flat chisel for quick demolition on construction projects

[2-Stroke Motor]: 900W 2-stroke gas powered motor with 32.7cc displacement for providing great power performance, use 2-stroke mixing oil with 25:1 mix ratio for supplying power, ideal for improving efficiency and saving labor; EPA certificated design for environmental protection

[Easy Operation]: Hand pull start system for offering high flexibility and easy operation, no need to connect cable and use electricity; repeatedly press the transparent fuel bubble to full fill the carburetor with fuel and pull the recoil handle several times to start the pile driver

Inner diameter adjustment range: 60-65mm (2.36-2.56-inch).

Side front auxiliary handle assembly fits for 22/26 electric hammer.

Side handle provides more control in heavy applications and bind up situations, for improved safety and accuracy.

Used for organizing your hammer and keeping this valuable tool out of plain site

Designed especially to carry the Hitachi DH40MRY rotary hammer

Plastic shell will not crack or break and will withstands years of repeated use

Composite housing with thermoplastic rubber handle grip and wings on right & left sides for better operator comfort

Large teasing trigger and progressive valve allowing more control to start holes

Handle exhaust allowing the air to flow away from the operator

【Powerful Motor & Variable Speed】The hammer drill equipped with 7 Amp high efficiency industrial copper core motor, gives more power, designed with variable speed, you’re able to set a suitable speed for different applications from 0-3000rpm.

【Hammer & Drill Function 2-in-1】Switch the orange button on the top to select hammer or drilling function by your tasks. Please note that this hammer drill can't be used in reinforced concrete walls.

【Metal Chuck】The metal chuck is more durable and sturdy than the plastic drill chuck, with longer life time. The maximum chuck diameter of this impact drill is 1/2'' (13mm).

[2 In 1 Gasoline Hammer]: 24 13/16"x10 5/8"x10 1/4" Multifunctional gasoline hammer features 7000r/min max speed and 3200/min impact frequency for providing powerful impact force; with drill bit for using on different construction drilling and point chisel for breaking concrete, brick and stone and other demolition projects

[2-Stroke Motor]: 2-Stroke gas powered motor with 32.7cc displacement for providing great power performance, use 2-stroke mixing oil with 25:1 mix ratio for supplying power, ideal for improving efficiency and saving labor; EPA & CE certificated design for environmental protection

[Easy Operation]: Hand pull start system for offering high flexibility and easy operation, no need to connect cable and use electricity; repeatedly press the transparent fuel bubble to full fill the carburetor with fuel and pull the recoil handle several times to start the machine

Single speed with reverse

Keyless chuck for fast drill bit change

1200 RPM * 3.0 Amp

【Main Parameters】Engine Type: 36 x32mm, single cylinder, air cooling, 2 stroke; Displacement: 32.7CC; Impact Frequency: 3200min-1; Impact Energy: 30J; Max Power: 1200w; Max Torque and Speed: 1.5N.m/5000r/min0.5L/h; Fuel Type: Mixed oil (25 gasoline: 1 motor oil); Fuel Tank Capacity: 0.9L; Fuel Consumption Rate: ≤0.5L/h; Max drilling diameter:40mm; Starter System: Hand pull start

【High-quality Materials】The aluminum material with a painted process is glossy and can resist wear, corrosion, and heat. Meanwhile, the plastic material is shock-resistant and anti-deformation.

【Easy to Use】The wireless design and light weight can improve the flexibility of operation. You can pull the rope to start the machine. Besides, the throttle switch, one-button flameout switch, and anti-skid auxiliary handle allow for convenient use.

Inner diameter adjustment range: 60-65mm (2.36-2.56-inch).

Side front auxiliary handle assembly fits for 22/26 electric hammer.

Side handle provides more control in heavy applications and bind up situations, for improved safety and accuracy.