Best Bare Tool Hammer Drills in 2026

Spring-loaded dust seals ensure longer tool life

Variable impact control dial (9 settings) ensures accurate impact energy depending on the application

Large on/off rocker switch allows for easy single finger operation

One-step chisel rotation (12 positions) allows the user to quickly and accurately adjust the chisel, not the tool

Large rear rubber handle allows easy operation with one or two hands

Variable position side handle allows 360-degree rotation and 150-degree adjustment for ease of use

In-line design for easy operation of tool in horizontal or vertical applications

Includes 0-1200 RPM variable speed reversing switch for increased versatility.

Patented DEWALT-built motor design generates 50% more power with increased overload protection for added durability

Soft grip handle and two-finger trigger for increased comfort and greater control.

Metal-gear housing for jobsite durability and increased reliability.

2-Speed range for high-speed drilling or high-torque applications

Soft grip handle and two-finger trigger for increased comfort and greater control

Metal-gear housing for jobsite durability and increased reliability

360-degree locking side handle with soft grip for greater control and versatility

10.0 Amp motor delivers increased drilling performance

Patented DEWALT built motor design generates 50% more power with increased overload protection for added durability

Dual Mode: hammerdrill / drill for versatility in masonry, wood, or steel drilling applications

2-Speed range for high speed drilling or high torque applications

Soft grip handle and two-finger trigger for increased comfort and greater control; Metal gear housing for jobsite durability and increased reliability

Streamlline over mold body and pistol grip handle for increase comfort and reduced user fatigue

Two finger locking trigger provides ease of use during extended use

Side handle provides more control in heavy applications and bind up situations

CLUTCH SETTINGS: Versatile to handle various jobs

ON-TOOL BATTERY INDICATOR: Gauge the status of the battery and reduce down time

LED LIGHT: Illuminates the workspace when use in darker areas

BELT HOOK: to keep tool close at hand

LIGHTWEIGHT: Only 3.7 lbs (with compact 3.0Ah battery) to reduce user fatigue

Dual speed transmission (0-1,100 & 0-3,100) provides maximum torque in setting one and maximum speed in setting two.

Streamlined over mold body and handle for increase comfort and reduced user fatigue.

Two finger locking trigger provides ease of use during extended use.

Side handle provides more control in heavy applications and bind up situations.

1/2-inch Metal chuck and key provides holding pressure for increased bit retention.

SECURE DRILLING – This powerful drill has an estimated maximum drilling diameter of 0.4 inch (10mm) in steel, 1 inch (25mm) in wood, and 0.5 inch (13mm) in concrete. The included depth rod makes it easy to scope out the drilling aperture.

PRODUCT DETAILS – Materials: Metal and Plastic. Dimensions: (L) 2.5” x (W) 10” x (H) 8”. Power Input: 550 Watt. Rated Amperage: 5.0 Amps. Rated Voltage: 120 V. Rated Frequency: 60 Hz. Speed: 0-3000 RPM. Chuck Capacity: 0.5 inch (13mm). Color: Orange.

【Vibration Control】The upgraded Anti-Vibration Technology (AVT) designed to decrease the vibration effectively, reduce fatigue; Longer air cushion in the hammer mechanism reduces vibration and improves hammer performance.

【Brute breaker tools】The heavy duty jack hammer 65F is perfect for breaking holes, trenching, chipping and demolition in concrete, block, brick, tile, stucco, housing foundation removal, concrete slab, oil chimney，mining and much more! We provide 24 months warranty service.

In-line design – tool balance controls angled, horizontal and vertical applications

Versatile two-way bit retention – accepts Bosch 1-1/8-In. hex steel and standard 1-1/8-In. air stee

Carrying case with wheels – convenient storage and easy transportation

All-metal housing, metal tube and case — designed for great jobsite durability

Service Minderbrush system – shuts tool down when maintenance is required

[SAME BATTERY, EXPANDABLE POWER] The same battery powers over 75+ 20V, 40V, and 80V lifestyle, garden, and power tools in the Power Share family

[ALL METAL GEARS] Dependable performance through the toughest jobs

[2-SPEEDS] Variable two-speed gearing and 20+1+1 clutch settings to adapt speed and torque for best results

[GRIPZONE] Comfortable, ergonomic design with micro-texture for optimum grip and comfort

[VARIABLE SPEED] For easy starting, maximum ipm/bpm, and complete control of your drilling and driving

[LED Light] Great for dark areas; stays lit for 20 seconds after trigger release

[INCLUDES] Nitro Hammer Drill, Carry Bag, Double-end Screwdriver Bit, Belt Clip, (1) 2.0Ah Battery (WA3525), 2A Charger (WA3881)

METAL CHUCK: 1/2 In. keyless metal chuck w/carbide insets for quick and simple bit replacements and secure holding power

TORQUE SETTINGS: 22 Torque settings, a drill mode and a hammer drill mode to properly match the torque to the application

MULTIVOLT: Can be run on a battery or power cord (one tool replaces two tools)

BELT HOOK: Metal belt hook so the tool is always close at hand

TRIGGER: Responsive variable speed trigger provides complete control during the application

LED LIGHT: Effectively illuminates dark work spaces

BRUSHLESS: Technology for higher efficiency, increased run time and longer tool life

BITURBO BRUSHLESS TECHNOLOGY: Featuring a brushless high-performance motor and drive-train system engineered to take full advantage of the additional power generated by core18v high power batteries (sold separately)

KICKBACK CONTROL: Helps to reduce the risk of injury from sudden rotational torque reaction in a bind-up scenario

CLUTCH WITH 25 SETTINGS: Provides driving accuracy for reduced fastener damage

ELECTRONIC ANGLE DETECTION: Allows precise installation of long screws straight on or at an angle

UPGRADED ALL-METAL CHUCK: For more durability, along with first-rate bit retention

BOSCH 18V CORDLESS POWER TOOLS ARE COVERED BY A FIVE YEAR LIMITED WARRANTY: For details, visit https://rb-pt.io/powertoolwarranty or call 1-877-bosch99

TWO-SPEED METAL GEARBOX: Choose between high-torque (0-550 rpm) driving or high-speed (0-2,200 rpm) drilling

2 P107 BATTERIES: These are two compact 1.5 Amp Hour batteries that are designed to last long with you through difficult jobs that require a smaller fuel cell. This keeps your cuts or drives accurate while decreasing fatigue in your arms

P117 CHARGER: This can charge some batteries in as little as 30 minutes, like the P102, and larger batteries like the P107 in under an hour. An onboard battery reader gives you status updates on your batteries, telling you when they’re charged, or even if they’re defective

✔️[SPECIFICATIONS] MAX. CAPACITY (WOOD): 1-1/2 IN, FREQUENCY: 60 Hz, NO LOAD SPEED (RPM): 0 – 3000 rev/min, WEIGHT: 4.84 Lbs., CHUCK SIZE: 1/2 IN., POWER: 550 W, VOLTAGE: 120V, AMPERAGE: 5 A, MAX. CAPACITY (CONCRETE): 3/4 IN.

TWO-YEAR (2) LIMITED WARRANTY, Every Promaker product is designed thinking of every household need, that’s why our Power Hammer Drill are perfect for any task. .. We built our brand on happy customers and we are sure that you’ll love our product too.

【Vibration Control】The upgraded Anti-Vibration Technology (AVT) is designed to decrease the vibration effectively, and reduce fatigue; a Longer air cushion in the hammer mechanism reduces vibration and improves hammer performance.

【Brute breaker tools】The heavy duty jack hammer is perfect for breaking holes, trenching, chipping and demolition in concrete, block, brick, tile, stucco, housing foundation removal, concrete slab, oil chimney, mining, and much more.

Lightweight design for easy use and handling in a variety of orientations

Two-finger trigger for increased comfort

360-degree side handle with depth rod offers greater control, versatility, and increased depth accuracy

Variable speed allows for precise hole placement on work surface

7.8-amp motor provides high performance and overload protection

High/low gear for high-speed drilling or high-torque applications

Dual mode: hammer drill/drill for wood, steel, or masonry applications

Lightweight design for easy use and handling in a variety of orientations

360-degree side handle with depth rod offers greater control, versatility, and increased depth accuracy

Use on concrete, wood, and metal

Two modes: hammer drill and drill only

REACTIVE FORCE CONTROL: Senses tool overload and stops rotation to ensure user safety and protect the tool motor and battery

METAL CHUCK: 1/2 In. keyless all metal chuck with carbide insets for quick and simple bit replacements and secure holding power

TORQUE SETTINGS: 22 Torque settings, a drill mode and a hammer drill mode to properly match the torque to the application

BELT HOOK: Metal belt hook so the tool is always close at hand

TRIGGER: Responsive variable speed trigger provides complete control during the application

[SAME BATTERY, EXPANDABLE POWER] The same battery powers over 75+ 20V, 40V, and 80V lifestyle, garden, and power tools in the Power Share family

[QUICK RELEASE CHUCK] Impact Driver uses ¼ in. HEX metal chuck for quick bit changes

[3-SPEEDS] Impact Driver has 3-speed control and variable speed trigger to adapt to all drilling and driving applications

[2-SPEEDS] Hammer Drill has variable two-speed gearing and 20+1+1 clutch settings to adapt speed and torque for best results

[GRIPZONE] Both drills are lightweight and designed with ergonomic GripZone micro-texture for comfort and control

[LED LIGHTS] Illuminate the workspace and cutline in low light environments

[INCLUDES] Nitro Hammer Drill (WX352L.9), Nitro Impact Driver (WX261L.9), (2) 20V 2.0Ah Batteries (WA3575), 2A charger (WA3881), belt clip, carry bag, double-end screwdriver bit, #2 screwdriver bit

13 amp motor delivers power for drilling holes of all sizes

Two operating speeds: max 1750 rpm in high, clutch in low gear range

90-degree left to right Roto-Lok handle offers maximum operating comfort

Easy-turn gear shift knob for comfort

Limited warranty

REACTIVE FORCE CONTROL: Senses tool overload and stops rotation to ensure user safety and protect the tool motor and battery

METAL CHUCK: 1/2 In. keyless metal chuck w/carbide insets for quick and simple bit replacements and secure holding power

TORQUE SETTINGS: 22 Torque settings, a drill mode and a hammer drill mode to properly match the torque to the application

BELT HOOK: Metal belt hook so the tool is always close at hand

TRIGGER: Responsive variable speed trigger provides complete control during the application

Two-Year limited Warranty

[SAME BATTERY, EXPANDABLE POWER] The same battery powers over 75+ 20V, 40V, and 80V lifestyle, garden, and power tools in the Power Share family

[ALL METAL GEARS] Dependable performance through the toughest jobs

[2-SPEEDS] Variable two-speed gearing and 20+1+1 clutch settings to adapt speed and torque for best results

[GRIPZONE] Comfortable, ergonomic design with micro-texture for optimum grip and comfort

[VARIABLE SPEED] For easy starting, maximum ipm/bpm, and complete control of your drilling and driving

[LED Light] Great for dark areas; stays lit for 20 seconds after trigger release

[INCLUDES] Nitro Hammer Drill, Carry Bag, Double-end Screwdriver Bit, Belt Clip

Self-stop brush system

Limited Warranty