Best Case Club Hard Rifle Cases in 2026

Fits scoped rifles up to 46"

Four accessory pockets store cleaning supplies, targets, hearing and eye protection, etc.

Easy clean lining

Fits tactical rifles up to 38"

Thick foam padding

Three magazine pockets

Fits IWI Tavor TS12, 1 Semi-Auto Pistol or Snub Nose Revolver, 4 Pistol Magazines, and up to 42 Extra Shotgun Shells (or accessories)

Includes 1 Hydro-Absorbent Silica Gel to help prevent gun rust and 1 small waterproof Accessory Box

Has built-in metal reinforced padlockable holes, wheels, and a manual pressure relief valve

Pre-cut foam perfectly fits a Glock 20, 3 Magazines plus 1 mag in the magwell. Pre-scored foam above the pistol can be removed if you have an optic. If you don't have an optic, leave that foam in place and you won't even know it is cut out. There are also perforations below the barrel for a flashlight or laser. Again remove if you have them or leave in place if you don't.

The magazine cutouts and pistol grip have a finger hole so you can remove either the gun or a magazine quickly and safely. No need to put your finger within the trigger guard. An additional perforation at the end of the barrel can also be removed to accommodate threaded barrels.

The case is waterproof, dustproof and crushproof with a lifetime warranty. It is airline approved for checked luggage and a legal for vehicle transport in all 50 states. 2 metal reinforced padlock holes will take a customer supplied padlock and ensures nobody gets in without authorization. Fold down handle stays out of the way when not in use & has a molded texture which provides a comfortable grip. Built in lid-stay ensures the lid stays upright when open and metal pins make the hinges robust.

Holds a broken down FN PS90 or P90 rifle with or without optics, 5 rifle magazines (in the lid) along with a semi-automatic pistol with 2 pistol magazines. Comes standard with a specially designed rechargeable moisture-absorbing silica gel canister to help prevent gun rust. Case is 100% shippable and airline approved for TSA checked luggage. Two padlock points that support a customer supplied padlock with a 1/4" shackle along with one way hinge pins ensure your gear remains safe and secure.

Accommodates up to 16" barrels and most optics. Does NOT accommodate side attachments. See image diagram and drawing for fitment information.

Case has a lifetime warranty, is 100% Waterproof (IP67) & Dustproof with a built-in pressure release valve. Foam is heavy duty, non-abrasive, pre-cut, mil-spec, closed cell polyethylene which won't absorb moisture or oil. Case shell was originally made for laptops making this perfect for discreet travel.

Pre-customized foam fits Kel-Tec KSG (Original, Compact, or Tactical) or Standard Manufacturing Company DP-12 Shotgun. Does not fit KSG25.

Also holds extra magazines, a pistol, optics, shotgun attachments, & various accessories

Foam insert is (closed cell) high grade polyethylene which can be wiped clean

Waterproof wheeled case comes with pre-cut foam to hold almost any Precision Rifle up to 49.3" long. If you have a Ruger Precision Rifle with folding stock, please refer to our (smaller) Ruger Precision Rifle Case made specifically for that rifle. 26" barrel RPRs will not fit. Also holds pistol, magazines, included silica gel canister, included waterproof box, bolt if desired & various accessories.

Stainless steel added to padlock points for added security. Orange peel texture added to exterior finish to minimize scratches. Structural ribs added to outside of case for increased durability. Long front handle length to help counter balance off center weighted loads. Wide bodied snap latches that can be used with gloves.

Please refer to diagram image to make sure your rifle will fit. Fits scope (within a 3.70" height). Fits Palm Shelf. Fits bipod. Fits under barrel attachments. Fits bolt in or out of the gun. See image diagram for fitment guidance.

Holds a single AR-15 Rifle with collapsible stock, along with a semi-auto pistol or revolver, extra rifle and pistol magazines, and accessories

Will also accommodate optics and underbarrel attachements on the rifle and underbarrel attachments on the pistol (does not accomodate side attachments or fixed/pinned/full stocks)

All the foam is Pre-Cut (see line drawing) so you get a custom foam fit at non-custom pricing!

Waterproof case comes with precut foam to hold almost any Tactical Shotgun

Also holds pistol, magazines, silica gel canister, waterproof box, & various accessories

Moisture removing silica gel canister & waterproof accessory box are included

The foam is already Pre-Cut to fit a pistol, so the customization work is already done for you! The case holds 1 semi-auto handgun & 2 extra magazines (see "Pre-Cut Diagram" image for where the foam is pre-cut)

DO NOT SETTLE for cheap and flimsy diced foam! Diced foam tears easily, retains water (rust!), collects dirt, and even if left untouched will eventually DISINTIGRATE right into your gun! Case Club foam is closed-cell military-grade polyethylene, which does NOT absorb liquids, does NOT tear easily, lasts a lifetime, can be cleaned easily, and will NOT disintigrate.

Can accommodate under barrel attachments

Holds KSG or DP-12 and a full size pistol. Accommodates pistol optics, shotgun optics, and foregrips.

Also holds up to 47 extra shotgun shells, and 2 pistol magazines

Foam insert is (closed cell) high grade polyethylene which can be wiped clean

Holds 15 Modern Sporting Rifle (.223/5.56) Magazines and 10 single stack or double stack pistol magazines

Extra accessory compartment on top for added versatility in storage requirements

Case is water resistant with an o-ring seal, perfect for long term dry storage

Waterproof wheeled case comes with pre-cut foam to hold your Ruger Precision with folding stock along with one pistol, 4 extra pistol magazines, 3-5 extra rifle magazines, included silica gel canister, included waterproof box, bolt if desired & various accessories.

Stainless steel added to padlock points for added security. Orange peel texture added to exterior finish to minimize scratches. Structural ribs added to outside of case for increased durability. Long front handle length to help counter balance off center weighted loads. Wide bodied snap latches that can be used with gloves.

Please refer to diagram image to make sure your rifle will fit. Fits scope (within a 3.70" height). Fits Palm Shelf. Fits bipod. Fits under barrel attachments. Fits bolt in or out of the gun.

Pre-cut foam holds a single factory Springfield M1A Scout Squad, SOCOM 16, Standard, Loaded, National Match, Super Match, or Garand Rifle (Not meant to fit Springfield M1A CQB stock)

Holds up to six 10 round magazines, or three 20 round magazines & accommodates all major optics mounted either in the forward position or above the rear sight

Stainless steel added to padlock points for added security, Orange peel texture added to exterior finish to minimize scratches, Structural ribs added to outside of case for increased durability, Front handle length increased to help counter balance off center weighted loads, Wide bodied snap latches that can be used with gloves

Pre-cut foam perfectly fits a Beretta 92FS, 5 Magazines plus 1 mag in the magwell. There are perforations below the barrel for a flashlight or laser. Remove if you have them or leave in place if you don't.

The magazine cutouts and pistol grip have a finger hole so you can remove either the gun or a magazine quickly and safely. No need to put your finger within the trigger guard. Additional perforations at the grip can be removed to allow the Full Sized versions of the 92fs to fit, and perforations at the end of the barrel can be removed to accommodate threaded barrels.

The case is waterproof, dustproof and crushproof with a lifetime warranty. It is airline approved for checked luggage and a legal for vehicle transport in all 50 states. 2 metal reinforced padlock holes will take a customer supplied padlock and ensures nobody gets in without authorization. Fold down handle stays out of the way when not in use & has a molded texture which provides a comfortable grip. Built in lid-stay ensures the lid stays upright when open and metal pins make the hinges robust.

Waterproof case comes with pre-cut foam to hold an SCAR17S rifle with factory stock

Also holds pistol, magazines, silica gel canister, waterproof box, & various accessories

Moisture removing silica gel canister & waterproof accessory box are included

Waterproof case comes with precut foam to hold almost any Sporting or Hunting Shotgun

Also holds pistol, magazine, extra shells, silica gel canister, waterproof box, & various accessories

Moisture removing silica gel canister & waterproof accessory box are included

Heavy Duty waterproof case with pre-cut foam holds factory Springfield M1A Scout Squad or SOCOM Rifle, or a Ruger 10/22 or Ruger Mini-14 along with a Semi-Auto Pistol. Case also fits x4 10rd magazines or x2 20rd magazines & x1 pistol magazine (+1 in the pistol magwell). Built in accessory pocket will hold loose gear such as safety equipment, tools, and ammunition. Pistol cutout also includes perforations for a flashlight or laser. Stay organized, look professional & protect your gear.

Custom foam is closed cell & meets Mil-Spec Packaging requirements. We have included a variety of perforations to accommodate a wide range of optics (within 4" height) along with under barrel attachments such as bipods, lasers, flashlights & foregrips. Use the included razor blade to connect the perforations so you can accommodate your unique rifle setup. If you do not need to remove a specific perforation, leave it in place and it won’t accidently tear nor will you be able to see it.

Case comes with a small waterproof accessory box that has a designated cutout to store small items. Also included is a reusable moisture removing silica gel canister to prevent gun rust. The canister has a built in viewing window that notifies you when saturated at which point you can recharge it by baking it in the oven. Once baked the canister will be ready for use again. This recharge process can be done indefinitely. Your climate & rifle usage will dictate how often a recharge is required.

Case comes with precut foam to hold almost any Sporting or Hunting Shotgun (max shotgun length 48.65")

Does not accommodate optics, pistol grips, or side-by-side double barrels

Foam insert is (closed cell) military grade polyethylene which can be wiped clean and is long lasting

Case fits x4 Rifles or Shotguns (under 41" in Overall Length), x3 Semi-Auto Pistols, x12 Rifle Magazines, x24+ Pistol Magazines, and x1 Moisture Absorbing Silica Gel Canister (Included)

Accommodates optics including scopes & red-dots, foregrips including vertical foregrips and angled foregrips, under barrel attachments including flashlights & lasers, Pistol optics & under barrel attachments, and Grip fins & featureless rifles

Case will (Likely) not fit Large side attachments, Bipods, Side by Side Barrels, or Large bolts that stick out the side

Waterproof wheeled case comes with pre-cut foam to hold almost any Hunting rifle

Also holds pistol, magazines, silica gel canister, waterproof box, & various accessories

Moisture removing silica gel canister & waterproof accessory box are included

Case fits IWI Tavor 7, X95, SAR, TAR-21, Kriss Vector, Desert Tech SRS-A1 Covert, Desert Tech MDR, MDRX, Kel Tec RFB, Steyr AUG, FNH PS90, P90, Berretta CX4 Storm. All of these rifles must still fall within constraints of above "Max Dimension" diagram (Max length of rifle is 33.09")

Also holds extra magazines, a pistol, optics, rifle attachments, & various accessories

Foam insert is (closed cell) high grade polyethylene which can be wiped clean

The case with precut foam fits a Hunting Rifle or Lever Action Rifle up to 49.22" in overall length, a Shotgun up to 49.0" in overall length, and a Revolver or Semi-Auto Pistol up 11.7" in overall length

The precut foam also accommodates Rifle and Shotgun Optics, Under-Barrel Attachements, Buttstock Padding/Extensions, and a Shotgun Pistol Grip

It also fits Extra Rifle Magazines (in the long accessory pocket), 4 Extra Pistol Magazines, 32 Shotgun Shells, 2 Moisture Absorbing Silica Gels (included), a Clear Waterproof Accessory Box (included), and a lid and base Foam Divider Piece (included)

Pre-cut foam perfectly fits a SIG P226, 3 Magazines plus 1 mag in the magwell. Pre-scored foam above the pistol can be removed if you have an optic. If you don't have an optic, leave that foam in place and you won't even know it is cut out. There are also perforations below the barrel for a flashlight or laser. Remove if you have them or leave in place if you don't.

The magazine cutouts and pistol grip have a finger hole so you can remove either the gun or a magazine quickly and safely. No need to put your finger within the trigger guard. An additional perforation at the end of the barrel can also be removed to accommodate threaded barrels.

The case is waterproof, dustproof and crushproof with a lifetime warranty. It is airline approved for checked luggage and a legal for vehicle transport in all 50 states. 2 metal reinforced padlock holes will take a customer supplied padlock and ensures nobody gets in without authorization. Fold down handle stays out of the way when not in use & has a molded texture which provides a comfortable grip. Built in lid-stay ensures the lid stays upright when open and metal pins make the hinges robust.

This it is only the foam, the case is NOT included! You should already own the V300 case before purchasing this product.

The foam fits perfectly into a Pelican Vault V300 Case, and holds 5 Semi Auto Pistols, 17 Pistol Magazines, and an anti-rust Silica Gel Canister (Included)

The 5th pistol slot can be removed, converting the design into a 4 Pistol with Accessory Pocket foam.

Case holds factory Ruger PC Carbine plus an additional magazine, a semi-automatic pistol, an extra pistol magazine, and has three accessory spots for gear

The foam can accomodate rifle optics, but not other rifle attachments

Foam insert is (closed cell) military grade polyethylene which is long lasting and can be wiped clean

Holds 20 Modern Sporting Rifle (.223/5.56)(30 Round) Magazines and 20 single stack or double stack pistol magazines

Compatible with metal magazines, pmags, ranger plates, and dust covers

Precision cut plastic dividers separate magazines for unparalleled organization and compact efficiency

The case is NOT included! This product is only the foam that fits INTO the Pelican 1520 Case.You should already own the case before purchasing this foam.

The foam fits perfectly into a Pelican 1520 Case, and holds 6 Semi Auto Pistols, 21 Pistol Magazines, and an anti-rust Silica Gel Canister (Included)

The 6th pistol slot can be removed, converting the design into a 5 Pistol with Accessory Pocket foam.

Heavy Duty waterproof case with pre-cut foam holds AR-15 Rifle with collapsible stock (Max overall rifle length of 34.8") along with a Semi-Auto Pistol. Case also fits x2 (standard or pmag) 30rd 5.56/.223 magazines & x1 pistol magazine (+1 in the pistol magwell). Built in accessory pocket will hold loose gear such as safety equipment, tools, and ammunition. Pistol cutout also includes perforations for a flashlight or laser. Stay organized, look professional & protect your gear!

Custom foam is closed cell polyethylene & meets Mil-Spec packaging requirements. Included is a variety of perforations to fit a wide range of optics (within 3.7" height) along with under barrel or over barrel attachments such as lasers, flashlights & foregrips. Use the included razor blade to connect the perforations so you can accommodate your unique rifle setup. If you do not need to remove a specific perforation, leave it in place and it won’t accidently tear nor will you be able to see it.

Case comes with a small waterproof accessory box that has a designated cutout to store small items. Also included is a reusable moisture removing silica gel canister to prevent gun rust. The canister has a built in viewing window that notifies you when saturated at which point you can recharge it by baking it in the oven. Once baked the canister will be ready for use again. This recharge process can be done indefinitely. Your climate & rifle usage will dictate how often a recharge is required.