Best Cedar Mill Fine Firearms Hard Rifle Cases in 2026

PLANO ALL-WEATHER TACTICAL GUN CASE: Protect your firearms from damage with the Plano All Weather 42-inch Tactical Gun Case. Continuous Dri-Loc seal creates watertight, dust-proof shield, protecting your firearms from water damage and the elements.

RUGGED, INDUSTRIAL STRENGTH CONSTRUCTION is elevated with heavy-duty, dual-stage lockable latches for additional security. Easy-glide wheels allow for easy transportation without weighing you down.

EASY CUSTOMIZATION: Features pre-perforated pluck-to-fit foam for easy customization to keep your firearms in place and protected.

✅Durable: Made with 600D Heavy Duty Industrial Nylon, Water Resistant and Dust Proof, Excellent Performance in Extreme Condition

✅Spacious: A Perfect Soft Double Gun Case You Will Need in the Range: Shotguns, AR 15 Rifles, Pistols, Magazine and Ammo, Earmuffs, Goggle, and so much more

✅Padded Rifle Backpacks: All Around Protection for Your Firearms.

Tsa & airline safe with 2 locking points: we are former tsa and private security guards who have tested our cases for current policies regarding the transportation and carry of firearms on aircraft our case had been rigorously tested and manufactured to comply with the tsa firearms transportation policy and at this point should have their own frequent flier miles travel accounts.

Carbon fiber reinforced polypropylene unlike cheap cases that will crack, chip, and break under stress, our box is engineered for strength and durability. Made to flex but not break. This keeps your pistols safe from impact by distributing the pressure over a larger area, decreasing the pressure per square inch (psi).

12.3” inches x 10.5” x 3.2” to fit some of the largest handguns including the desert eagle handgun, many revolvers, and most guns under 6 inches - replaceable foam is easy to get and more affordable than our competitors. So if at some time you decide to change your configuration to fit different tactical accessories, it easy and cheap to do.

Outer: 16" x 13" x 6.87" Inner: 14.62" x 10" x 6"

IP67 Water Proof, Shock Proof, and Dust Proof.

Pressure equalization valve including 3 layers of foam padding: 1 customizable pull and pluck cube, 1 solid bottom pad and 1 top egg crate layer.

Don’t settle for other rifle cases made of flimsy materials and poorly engineered parts that break under pressure, leaving your firearm unsecured. the cedar mill firearms iron clasp rifle case is built for strength & durability, distributing stress over a larger area to decrease pressure per square inch. Our ar 15 case is made with ds2tek poly that flexes under stress but won’t break, and corrosion-resistant stainless steel clasps that hold your ar case securely shut & won’t break off if abused.

Unlike other hard gun cases for rifles that exaggerate their dimensions but won’t actually hold larger firearms, our shotgun case is a solid 48” long, 9” wide, and 4” deep, for a hard gun case that will fit some of the largest rifles, shotguns, and even scoped guns. Includes 2 layers of plush 1-inch pick and pluck foam to customize your tactical gun case to suit hundreds of gun configurations.

Unbeatable protection seal – with our ar gun case ’s ip67 waterproof rating, water, rain, dirt, dust, sand & debris are no match for this gun carrying case, so your firearm will look new for a long time to come. engineered to float in water with a sturdy o-ring, our waterproof case allows you to recover your valuables in case the unthinkable happens.

You want a case that will hold your gun no matter what shape or size it is. Well, you’ve come to the right place because our Triple 3 rifle cases has plenty of room for all shapes and sizes! With interior measurements at 44" x 18", and 7-1/4th inches deep, this means even longer guns can fit inside! It also has 2 full-size pieces of pluckable foam specifically designed as shock-absorbers during transport or storage - making sure your guns stay safe at all times!

Of course, safety is always the number one concern, and our cases are made with that in mind. That’s why we have features like stackable lids, smooth-rolling wheels, and multiple locking holes. Our cases are also made to be stylish and tough. The hard exterior will protect your firearms from any bumps while the sleek design will make you look good. And don’t worry – these cases are waterproof, so if it starts raining on your trip, you won’t have to worry about your guns getting wet.

You deserve a case that will keep your firearms safe while you’re on the go. That’s why we created our Triple 3 Rifle/Bow Case–it’s sturdy, dependable, and comes with all the features you need to keep your firearms protected. It’s made out of durable shockproof DS3TeK to distribute external pressure evenly throughout the hard case and protect your long guns from any outside force. It comes with an O-Ring seal and a waterproof IP67 rating to keep your scope, guns, or bow clean, dry, and secure.

Unlike weak, poorly designed pistol cases that crack, chip and break under stress, The Cedar Mill Fine Guns pistol case is specifically engineered for strength and durability. Constructed of carbon fiber reinforced ds3tek polypropylene, this crush-resistant gun carry case is made to flex under pressure, but not break – Keeping your hand gun case safe from impact by distributing pressure over a larger area and decreasing pressure per square inch.

12” x 8” x 3.5” don’t settle for hard pistol cases that lack the secure, durable locking system you need. our revolver case features a double-latch system with 2 locking lugs for a firm, consistent seal. Compatible with chained, paddle or combination locks (not included). Our 12x8x3.5-inch pistol hard case fits some of the largest handguns, many revolvers & most guns under 6”. included: 2 foam inserts w/ 4 total foam pieces.

At Cedar Mill Fine Guns, we believe that affordability and lifelong-quality protection should go hand in hand. As an american-based business, we support our customers’ second amendment rights, and construct our pistol carrying case out of the highest-quality, most durable materials – For intelligent designs that are made to last for decades. if for any reason you aren’t satisfied with your hard case with foam, simply reach out so we can make it right.

Unlike weak, poorly designed pistol cases that crack, chip and break under stress, The Cedar Mill Fine Guns pistol case is specifically engineered for strength and durability. Constructed of carbon fiber reinforced ds3tek polypropylene, this crush-resistant gun carry case is made to flex under pressure, but not break – Keeping your hand gun case safe from impact by distributing pressure over a larger area and decreasing pressure per square inch.

12” x 8” x 3.5” don’t settle for hard pistol cases that lack the secure, durable locking system you need. our revolver case features a double-latch system with 2 locking lugs for a firm, consistent seal. Compatible with chained, paddle or combination locks (not included). Our 12x8x3.5-inch pistol hard case fits some of the largest handguns, many revolvers & most guns under 6”. included: 2 foam inserts w/ 4 total foam pieces.

At Cedar Mill Fine Guns, we believe that affordability and lifelong-quality protection should go hand in hand. As an american-based business, we support our customers’ second amendment rights, and construct our pistol carrying case out of the highest-quality, most durable materials – For intelligent designs that are made to last for decades. if for any reason you aren’t satisfied with your hard case with foam, simply reach out so we can make it right.

External: 44" x 16" x 14" Inside: 41" x 13" x 12" Weighs 29 lbs - Designed to secure 2 -3 rifles or combination with optics and gear.

IP67 Waterproof protection for up to 1 meter fully submerged with a rubber gasket lining. Stackable design allows for secure multi-case transport.

Includes 4 layers of foam made of 1 fully customizable pull & pluck cubed foam layer, 1 solid foam layer, 1 solid bottom pad foam layer and 1 layer of egg-crate foam padding.

Purchase a solution, not a project. Unlike other rifle cases, Our Tactical Guitar Case does not need special foam cutting tools to provide a professional finished product. It has a discreet design that will prevent anyone from noticing that you’re carrying equipment with you. A removable logo tag makes this case truly discreet

Our Tactical Guitar Case with Triple Padded Foam is the perfect way to protect your firearms when transporting them. The egg crate foam will keep them in place and the customizable triple foam is easy to cut in the designated and specific shape of your guns. You won’t find a better way to transport your rifles. It includes a padlock and a locking latch that ensures your guns are well-protected wherever you may be. It has all the features you need to make sure your possessions are safe and sound.

If you're looking for a way to carry your guitar with you while also keeping your guns protected, look no further. This Guitar Concealment Case is perfect for anyone who wants to keep their guns or guitars in one place. It's made with a sleek design that will make you look professional, and it's California Compliant so you don't have to worry about any legal issues. It includes a lock and latch that will provide you superb security anywhere you go!

Outer: 44.37" x 16" x 6.12" Inner: 42" x 13.5" x 5.25" Weighs 20.5 lbs - Designed to secure up to two capacity or combination with optics and gear.

IP67 Waterproof protection for up to 1 meter fully submerged with a rubber gasket lining.

Includes 3 layers of foam made of 1 fully customizable pull & pluck cubed foam layer, 1 solid foam layer and 1 layer of egg-crate foam padding.