Best Milwaukee Heat Guns in 2026

⏩【1800W Strong Power With 2 Settings】This heat gun features two modes with two heat outputs, I: 752℉, 250L/min, II: 1112℉, 500L/min. With a strong power of 1800W, this hot air gun can quickly heat up to 1112℉ in seconds. The SEEKONE Heat Gun has nearly unlimited versatility, generates enough hot air for almost any project, especially if you are a crafter, or DIYer.

⏩【Safe and Reliable】This professional heat gun is UL certified and tested for fire-resistant materials. Built-in overload protection shuts the heating element down and prevents burn-up.

⏩【Ergonomic Handle & Fireproof Materials】The outer layer of this SEEKONE gun handle is wrapped with TPE rubber, which has an excellent feel and is non-slip and labor-saving. The excellent PA6 flame retardant nylon composite material is used around the air outlet, which can prevent the high temperature air from blowing out and cause the gun to burn and cause danger.

【Strong Power With 2 Modes】 SEEKONE Digital LCD Display 1800W Heat Gun provides strong power quickly heat up to 1100℉(600℃) in seconds. Two modes switch with variable temperature by digital control [ I: 120℉-750℉ (50℃~400℃); II: 120℉-1100℉ (50℃~600℃)] . It can adjust the temperature quickly with long press. Professional heater gives outstanding performance by keeping running 500 hours in max temperature.

【Large LCD Display & Power-On Memory】 SEEKONE DIY heat gun digital control with Large LCD Display, you can adjust the air volume and temperature precisely, the use temperature is clearly on the LCD display. Our heat gun built-in power-on memory function, it will continue working on last set TEMP & SPEED, no need to resetting again. This is the first one heat gun can change ℃ to ℉, please press the 2 wind speed button in same time for few seconds to set the conversion between Celsius and Fahrenhe

【Overload Protection & Power-Off Delay Function】Using the dual heating wire for rapid heating, the integrated overload protection function that blocks the heating element and prevents burning. Delay off function makes the heating wire cool down after shutting down, it will prolong the device life and safety.

features and benefits: high performance heating Coil: reach operational temperature in 6 seconds redlink&trade

This product meets customer requirement

Product is easy to use

【Strong Power & Adjustable Temperature】Variable temperature settings range from 122°F to 1112°F and equipped with 8 Gears Temp Control, you can rotating the rear cover for temperature adjustment and satisfy different utility. It is includes two air flow modes: I:190-210L/min; II:250-500L/min.

【Overload Protection & Ergonomic Design】 Yeegewin heat gun possesses overload protection to prevent the main power line from overheating and damage Internal parts and circuits. This heat gun has a scientific ergonomic design and non-slip Rubber handle for comfortable grip, it has

【700H Service Life 】The components of this hot air gun are made to last, and encased in a shell which is made of heat-resistant and hard ABS plastic. Using a high-quality heating wire, even if the temperature quickly changes from hot to cold, it will not break due to thermal expansion and contraction and along with a all-copper motor, support a product lifespan up to 700 hours

Compact design for easy use in tight spaces

Powered by Xc 5.0 battery

Reaches operational temperature in just 7 seconds

►【Dual Temperature Settings】The YEEGEWIN mini heat gun has 2-temp settings, I: 480°F, 100L/min; II: 850°F, 500L/min. Low speed & heat for delicate or detail work, high speed & heat for high volume work, which ensures this heat gun can be used to satisfy your numerous needs.

►【UL-certificated & Overload Protection】The hot air gun is manufactured to North American safety standards and pass UL safety certified. It is built in over-heat protection, when the temperature is overheated, the circuit will automatically cut off forcibly, so that it will not burn the entire heat gun due to certain factors to protect user safety and extend the service life of the hot air gun.

►【Hands Free & Ergonomic Design】This ergonomic design and light weight make the hot air gun fit comfortably in your hand and minimize fatigue on even the longest jobs. The built-in bracket allows stand stably for a hands-free operation, and the 4.9Ft power cord help moves flexibly in a large area.

Power Tools and Accessories

Country of manufacture: China

Manufacturer: Milwaukee

The product is easy to use

The product is durable

The product is manufactured in China

USA FAMILY-OWNED COMPANY: Master Appliance has been manufacturing high quality industrial heat tools since 1958. Located in Racine, WI, with over 60 years of experience in the heat tool industry, you can find Master's industrial heat guns trusted and put to use in some of the most well-known manufacturing companies worldwide. The EC-200 is a great entry level heat gun for users that desire a variable temperature heat for those do-it-yourself projects from a known and trusted USA brand.

VARIABLE TEMPERATURE HEAT GUN & 2 FAN SPEEDS: The EC-200 heat gun can be adjusted from 100F to 930F and has two fan speeds 5 & 9 CFM. The adjustability makes it versatile for a wide range of projects. A great heat gun for shrink tubing, electrical wire connectors, packaging, epoxy resin, stripping paint, crafts, candle making and more

ETL LISTED & BUILT IN HAND GUARD: This heat gun has been tested and approved by ETL safety testing agency. Hand guard protects hands and fingers. A recessed switch guards against knocks and bumps.

Voltage: 120V / 50Hz, Power:1600W

Industry standard and reliable ,Adjustable hot air from 100f-1290f / 40 °C to 700 °C ,Long lifetime ,Heating tube protection for more security

Accessories:Wide slot nozzle 20 mm,Wide slot nozzle 40 mm,Silicone pressure roller 40 mm ,heating element,

USA FAMILY-OWNED COMPANY: Master Appliance has manufacturing high quality industrial tools since 1958. Located in Racine, WI with over 60 years of experience in the heat tool industry, you can find Master’s professional heat guns like this HG-301D heavy duty electric heat gun in the hands of professionals worldwide.

INDUSTRIAL QUALITY HEAT GUN: This heavy-duty heat gun is made with die-cast aluminum housing and an upgraded long-life universal motor that delivers exceptional run life. These Master Heat Guns are designed and engineered in the USA and are tested to continue their top-notch performance in the most demanding work environments. Trusted by some of the most well-known manufacturing companies worldwide.

POWERFUL AND HEAVY DUTY: 1740 watts of power reaches a max temperature of 1200F quickly (measured from the nozzle). A fixed air intake provides temperature consistency, improving process control. Great for a wide variety of tasks including wire connectors, heat shrink tubing, paint stripping, decal removal, epoxy resin, packaging, automotive repair, wiring projects, leather seat repair, and more.

[FAST HEATING AND VERSATILE ADJUSTMENT] The 1500w heat gun provides fast heating technology that can reach its peak in 1.5 seconds. Variable temperature adjustment allows you to work on your project using consistent and precise heat. Air output volume can also be adjusted to either 66 gallon/min or 132 gallon/min.

[SAFE AND RELIABLE] We kept safety as our first brand priority and chose the premium parts such as UL-certified power cord, ceramic frames, nickel-chromium heating coil, polycarbonate blower fan, and mica plates to build this heat gun. Overload protection will automatically shut it off when overheated.

[SLIP-PROOF HANDLE AND HANDS-FREE DESIGN] Our handle is designed to allow you to work more conveniently. And the heat gun can also stand by itself to free your hands, so you can focus more on your work pieces, no matter it's shrink connectors or PVC pipes.

🌈【FIT FOR AND PROTECTION:】--- Suitable for Milwaukee 18V battery model: M18 48-11-1811 48-11-1840 48-11-1850 2620 2630 48-11-1811 48-11-1815 48-11-1820 48-11- 1822 48-11-1828 48-11-1840 lithium-ion Battery LED work light; Maximum initial battery voltage (measured without a workload) is 20 volts. Minimal voltage is 18V;

🌈【FAST PREHEATING & CORDLESS：】--- This battery powered hot glue gun adopt ceramic PTC thermal element, takes only 3-5 minutes to warm up, glue dropping is 0.63oz per minute(5～10g/mim), really achieve rapid heating and fast glue; Wireless design, No cord No limits! Comviently use it anytime,anywhere! For Milwaukee 18V Max Li-ion Battery powered for the hot melt glue gun, plug in your CORRECT battery will maintain the glue gun stand without the bracket;

🌈【SAFE PROTECTION AND ANTI-DRIP DESIGHT:】--- Adopt of high quality material, built-in low-voltage protection, 50W output for faster and smoother use. Black silicone tip cover provide heat-resistant to aviod burns during working process; The Aluninum and insulated nozzle anti-drip fine tip design to prevent leakage of the glue, can efficiently decrease 15% of the glue waste;

Power Tools and Accessories

Country of manufacture: China

Manufacturer: Milwaukee

10:1 Infrared Temp-Gun

The product is easy to use and easy to handle

The product is highly durable

1500 Watt Dual Temperature Heat Gun.

Super-versatile Heat gun is the ideal way to strip paint and varnish.

This heat gun features two heat settings for a wide variety of jobs.

30:1 infrared/Contact temp-gun

The product is easy to use and easy to handle

The product is highly durable

Series : M18

Air Flow (CFM) : 6

Length : 6.4

120.00 VAC

1.60 lb

On/Off - 2 Temperatures, On/Off Speed

The product is easy to use

The product is durable

The product is manufactured in China

120.00 VAC

1.60 lb

On/Off - 2 Temperatures

【LCD Digital Display & Efficient Heating】——The heat gun for shrink tubing has a HD blue ray LCD display, which allows you to know the temp & wind speed of machine and adjust accurately in real time. It is a highly efficient tool that quickly heats up to its maximum temperature in 2-3 seconds. Its powerful motor generates heat up to 1022 degrees Fahrenheit, making it ideal for a wide range of applications such as heat shrinking, paint stripping, and thawing frozen pipes.

【Variable Temp Control & Overload Protection】——350W hot air gun provides strong power in two modes: I: 50-300℃（122-572°F）, II: 300-550℃（572-1022°F). Six airflow speeds: I: 100-180L/min, II: 220-280L/min (Max air flow of 9.9CFM). Additionally, its overheat protection feature automatically shuts off the heat gun if it exceeds a safe operating temperature, ensuring long-term durability and safety.

【Unique Memory & Locking Temperature】——The memory mode function can directly work on the last set temperature when you use it next time, no need to resetting again, pretty save time! Additionally, Free up your hands when you press the locking temperature button, you can complete your work even if you are alone.

【Fast & Efficient Heating】——The cordless battery powered heat gun is a highly efficient tool that quickly heats up to its maximum temperature 1202℉ (550℃) in 2-3 seconds. High-quality ceramic heating core effectively reduces 20% of heating time comparing to traditional heat guns.

【Variable Temp Control & Overload Protection】——350W hot air gun provides strong power in two modes: I: 300℃（572°F）, II: 550℃（1022°F). Max air flow of 7CFM. Additionally, its overheat protection feature automatically shuts off the heat gun if it exceeds a safe operating temperature, ensuring long-term durability and safety.

【Cordless & Ergonomic】——Ergonomic design includes ergonomic handle for comfort using, and integrated stand for hands-free operation. Temperature lock button provide added convenience and flexibility during use.

NOTICE: Battery DO NOT Include ! ! ! Heat Gun Tool Only ! ! !

COMPATIBLE WITH MILWAUKEE BATTERY - This cordless heat gun is designed to be compatible with a variety of Milwaukee m18 Battery. Such as 48-11-1820 48-11-1822 48-11-1840 48-11-1841 48-11-1828 48-11-1850 48-11-1852 48-11-1860 48-11-1862 48-11-1880.With this hand tools for milwaukee m18 battery, users can work without the need for cords or outlets, allowing for greater flexibility in tight spaces, job sites, and outdoor environments.

FAST HEATING & ADJUSTABLE TEMPERATURE - This cordless mini heat gun features a high-quality ceramic heating core, enabling it to heat up in just 3 seconds. It also offers two adjustable temperature settings, ranging from 300-550 ℃ for high and 50-300 ℃ for low. The air volume is 7CFM. Making it an adaptable efficient m18 tools that can easily cater to various work scenarios.

Dual temperature 570 and 1000-degrees F; 11.6 amp motor

Unique impact resistant heating element

Efficient soft air velocity-increases surface temperature much faster than conventional hot air

▶【Efficient & Powerful】The cordless heat gun for Milwaukee m18 18V Battery is an incredibly efficient tool that reaches maximum temperature within seconds. The tool also comes with two-gear temperature settings: Low:300°C（572℉) and High:550°C(1022℉).❗️❗️❗️NOTICE - Battery NOT Include ❗️❗️❗️ Cordless Heat Gun Tool Only

▶【Battery Powered】Powered by Milwaukee m18 18V batteries, the heat gun relies on batteries to provide long-lasting and reliable power. It is compatible with a variety of Milwaukee m18 18V Li-Ion batteries including 48-11-1811, 48-11-1815, 48-11-1820, 48-11-1822, 48-11-1828, 48-11-1840, 48- 11-1841, 48-11-1850, etc.

▶【Cordless & Convenient Design】With a lightweight fuselage of just 0.7kg and a cordless design, the heat gun is highly convenient and easy to use. Its button adjustment feature and fixed position capabilities allow for unrestricted movement while working in tight spaces, on job sites, or outdoors.

【Compatibility and Protection】Compatible with for Milwaukee 18V battery model: M18 48-11-1811 48-11-1840 48-11-1850 2620 2630 48-11-1811 48-11-1815 48-11-1820 48-11- 1822 48-11-1828 48-11-1840 lithium-ion Battery Cordless Hot Glue Gun; Maximum initial battery voltage (measured without a workload) is 20 volts. Minimal voltage is 18V (2 A Battery Included);

【Fast Discharging of Glue】This battery powered hot glue gun adopt ceramic PTC thermal element, takes only 3-5 minutes to warm up, glue dropping is 0.63oz per minute(5～10g/min), really achieve rapid heating and fast glue; Wireless design, No cord No limits! Conveniently use it anytime,anywhere! For Dewalt 20V Max Li-ion Battery powered for the hot melt glue gun, plug in your CORRECT battery will maintain the glue gun stand without the bracket;

【Wide Application】--- This wireless hot glue gun meet a variety of DIY needs, This cordless glue gun is an ideal tool for DIY, such as crafts, arts, home repair, making Christmas decoration and gifts. It can work well with plastic, glass, paper, cotton, fabric and other materials, making Christmas decoration, paste headgear, glued toy and gifts;