Best Rfid Blocking Holders in 2026

Exclusive Double Card Holder Design: Each side has a card slot that can easily accommodate different cards and doesn't stack the cards together, with wider edge, smooth, wear-resistance and not cracking. Clear durable PVC material, durable, attractive and practical, low-temperature resistance and high-temperature resistance. High transparency. Even if multiple badge holders overlapping, read effortlessly

Super Thickness Card Holder: Single layer thickness is increased to 0.4mm, compared to the standard thickness 0.25mm. Wider Edge, not cracking. The badge holders will not leave trace, folded and refolded many time. The hanging Slot/holes will not break, distorted many time

Barcode Scannable: Crystal clear transparent on both sides. The cards with barcodes or QR codes can be scanned without removing it from the badge sleeve holder.Our badge holders are tear-resistant, economical, and durable for repeated use

Holder Size: 100 x 85mm/ 3.9" x 3.3" (L*W), Fit Card Size: 90 x 55mm/ 3.5" x 2.2" (L*W); Lanyards with swivel hook is up to 18" / 45cm long, lanyard is total 36" / 90cm long and 0.4" / 1cm wide

Each badge holder has a nice ziplock across the top so as to protect name tag or card from water and dirt

Each neck lanyard with firm steel swivel hook is lightweight and easy to connect, can 360 degree rotating, which is made of special soft double fabric strap, very durable and comfortable

Outer Size:185 x 115mm/7.28" x 4.53"(L*W), Inner Size:155 x 110mm/6.1" x 4.33"(L*W), Fit 6 x 4 inches Avery Name Badge Inserts，id cards, photos and so on. 30c/0.3mm thick, 100% high quality, but other cheap products are not more than 0.25 mm thick

Clear durable PVC material,low-temperature resistance and high-temperature resistance. Allow you name card read easy by the electronic security

Wider edge,smooth,wear-resistance and not cracking.Stay as new after long term use.The name badge holders never leave trace or break even if fold repeatedly

Material: Plastic, Style: Horizontal

Color: Clear

Holder Size: 100 x 85mm/ 3.9" x 3.3" (L*W); Fit Card Size: 90 x 55mm/ 3.5" x 2.2" (L*W)

Outer Size:152 x 102 mm/5.98" x 4.02"(L*W), Inner Size: approx 130 x 97 mm/5.12" x 3.82"(L*W),Fit Name Badge Inserts Size:approx 125 x 90 mm/4.92" x 3.54". 30c/0.3mm thick, 100% high quality, but other cheap products are not more than 0.25mm thick

Clear durable PVC material,low-temperature resistance and high-temperature resistance.Allow you name card read easy by the electronic security

Wider edge,smooth,wear-resistance and not cracking.Stay as new after long term use.The name badge holders never leave trace or break even if fold repeatedly

Exclusive Double Card Holder Design: Each side has a card slot that can easily accommodate different cards and doesn't stack the cards together, with wider edge, smooth, wear-resistance and not cracking. Clear durable PVC material, durable, attractive and practical, low-temperature resistance and high-temperature resistance. High transparency. Even if multiple badge holders overlapping, read effortlessly

Super Thickness Card Holder: Single layer thickness is increased to 0.4mm, compared to the standard thickness 0.25mm. Wider Edge, not cracking. The badge holders will not leave trace, folded and refolded many time. The hanging Slot/holes will not break, distorted many time

Barcode Scannable: Crystal clear transparent on both sides. The cards with barcodes or QR codes can be scanned without removing it from the badge sleeve holder.Our badge holders are tear-resistant, economical, and durable for repeated use

Outer Size:135 x 85mm/5.32" x 3.35"(L*W), Inner Size:110 x 80mm/4.33" x 3.15"(L*W),Fit Name Badge Inserts Size:3 x 4 Inches. 30c/0.3mm thick, 100% high quality, but other cheap products are not more than 0.25mm thick

Clear durable PVC material,low-temperature resistance and high-temperature resistance. Allow you name card read easy by the electronic security

Wider edge,smooth,wear-resistance and not cracking.Stay as new after long term use.The name badge holders never leave trace or break even if fold repeatedly

Made with 100% recyclable materials

Metal clip is approx 1" x 3/8"(L x W), strap is approx 2 3/4" x 1/2"(L x W)

Fits 5/8" slots on badge holders and plastic name tag holders, swivels 360 degrees

Material: Plastic, Colour: Clear, Style: Horizontal

Holder Size: approx 114 x 93mm/4.48" x 3.66"(L*W), Inner Size: approx 110 x 70mm/4.33" x 2.75"(L*W)

Perfect for holding name tags, badges, cards and so on

Holder Size: 135 x 85mm/5.32" x 3.35"(L*W), Fit Card Size:115 x 80mm/4.53" x 3.15"(L*W); Lanyards with swivel hook is up to 18" / 45cm long, lanyard is total 36" / 90cm long and 0.4" / 1cm wide

Clear durable PVC material,low-temperature resistance and high-temperature resistance. Allow you name card read easy by the electronic security. The lanyard is made of special soft double fabric strap, very durable and comfortable

Each badge holder has a nice ziplock across the top so as to protect name tag or card from water and dirt, with wider edge,smooth,wear-resistance and not cracking, can stay as new after long term use.

Plastic retractable reel with built-in carabiner clip, high quality material,durable and stylish, light Weight.Suitable for nurse, doctor, employee, teacher, volunteer etc

Cord can up to 2 foot and easily retracts, will allow you to easily swipe an electronic security card or display your ID without reaching into your pocket or bag

Carabiner hook closes securely onto all types of clothing, belt loops, straps or bags for added convenience

Holder Size: approx 114 x 68mm/4.49" x 2.68"(L*W), Inner Size: approx 87 x 61mm/3.43" x 2.4"(L*W), Compatible with 2-1/4" x 3-1/2" Avery Name Badge Insert Refills. 30c/0.3mm thick, 100% high quality, but other cheap products are not more than 0.25mm thick

Metal clip is approx 1" x 3/8"(L x W), strap is approx 2-3/4" x 1/2"(L x W)

This name tag holders have wider edge,smooth,wear-resistance and not cracking.Stay as new after long term use.The name badge holders never leave trace or break even if fold repeatedly

Premium genuine leather, specially designed with 1 ID window in front and 2 card slots in back

Perfect for ID cards, name cards, credit cards, membership cards, library cards, for factory workers, office worker etc

With clear cover,the front ID window is visible

Plastic retractable reel with built-in carabiner clip, high quality material,durable and stylish, light Weight.Suitable for nurse, doctor, employee, teacher, volunteer etc

Cord can up to 2 foot and easily retracts, will allow you to easily swipe an electronic security card or display your ID without reaching into your pocket or bag

Carabiner hook closes securely onto all types of clothing, belt loops, straps or bags for added convenience

Outer Size:114 x 68mm/4.49" x 2.68"(L*W), Inner Size: 87 x 61mm/3.43" x 2.4"(L*W),30c/0.3mm thick, 100% high quality, but other cheap products are not more than 0.25mm thick

Clear durable PVC material,low-temperature resistance and high-temperature resistance. Allow you name card read easy by the electronic security

Wider edge,smooth,wear-resistance and not cracking.Stay as new after long term use.The name badge holders never leave trace or break even if fold repeatedly

Outer Size:152 x 102 mm/5.98" x 4.02"(L*W), Inner Size: approx 130 x 97 mm/5.12" x 3.82"(L*W),Fit Name Badge Inserts Size:approx 125 x 90 mm/4.92" x 3.54". 30c/0.3mm thick, 100% high quality, but other cheap products are not more than 0.25mm thick

Clear durable PVC material,low-temperature resistance and high-temperature resistance. Allow you name card read easy by the electronic security

Wider edge,smooth,wear-resistance and not cracking.Stay as new after long term use.The name badge holders never leave trace or break even if fold repeatedly

Acrylic crystal ID card badge holder is double-sided transparent, stylish and visible, it is wear-resisting and heat-resisting, more durable than other common badge holder on the market.

Perfect for ID cards, name cards, credit cards, membership cards, library cards, for factory workers, office workers etc.

Humanized design, rounded corner is not easy to scratch, there is a push-up hole in the back of the badge holder, convenient for you to change id card anytime anywhere.

Sturdy and Durable: The ID badge holder is made of thickened polycarbonate material and metal back clip, which is transparent, durable, fall-resistant, pressure-resistant, and not easy to break. You can use it to protect your card with confidence. The metal clip is fastened with strong screws, so you don't have to worry about it falling off during use.

6 Card Capacity: There is a spring bracket inside the ID holders, which can effectively prevent your card from slipping. You can also fix it when you put in one card. The more cards, the tighter the card will be, and it can hold up to 6 cards.

Easy to Use: The internal spring is a cambered design, which won't scratch the card and easily accommodate your credit card, ID card, access card, etc. Simply push the card up from the bottom to take it out.

Outer Size:135 x 85mm/5.32" x 3.35"(L*W), Inner Size:110 x 80mm/4.33" x 3.15"(L*W),Fit large credit card or Name Badge Inserts Size:3 x 4 Inches. 30c/0.3mm thick, 100% high quality, but other cheap products are not more than 0.25mm thick

Clear durable PVC material,low-temperature resistance and high-temperature resistance. Allow you name card read easy by the electronic security

Wider edge,smooth,wear-resistance and not cracking.Stay as new after long term use.The name badge holders never leave trace or break even if fold repeatedly