Best Chucks Woodbarn Jack Accessories in 2026

If you are worry about compatibility, please check the oval's size on your jacks.Product Dimensions: 50.7*41.4*24 mm (2.0 x 1.63 x 0.95 inches); Slot Size: 8.8 mm(0.35 inch) wide; 23.90 mm (0.94 inch) deep; Bolt Length: 4.1 cm(1.6 inches); Bolt Dimensions: 9.7 mm(0.38 inch).

Sturdy: Power Saving Scissor Jack Adapter-Made of very solid chrome vanadium steel and new composite steel material. No more worrying during use.

Compatibility: After we adopted standardized production, scissor jack adapter is suitable for most of loop type or double eyelet type scissor jacks in the market .

[Capacity]:Hydraulic bottle jack is capable of 4 ton(8800 lbs).Lifting min height 7.4",max height:14.3".Adjustable height:2.36".Lifting height:4.54".Weight:6.2(lb).4 Ton bottle jack is use for sedans,suv,travel trailer,station wagon,mini bus,van.Easy to carry and place in the trunk of vehicles

[Durable Welded Frame]:Adopt thick drop forged alloyed welded steel construction of bottle jacks for very sturdy,durable and prevent leak oil.Car jack surface paint is oil-proof and anti-corrosion.Easy to clean

[Automatic Safety Valve]:Each jack is tested for safety. Built-in oil-bypass and secure valve will automatically protect jack hydraulic system when overload.Keep Red bottle jacks from being damaged and keep you safe.Heavy duty jack accessories with steel long handle.Pump handle lifts without any effort and comes down smoothly

√4 IN 1 ELECTRIC HYDRAULIC JACK:Our 4 in 1 electric hydraulic jack includes electric car jack,air pump,warning light and major LED light,which meets all your tire replacement needs in one time.The electric jack is easy to lift 5 ton car,about 1 min reach max height(lifting height range:5.9~17.7 inch.The inflator pump in storage box takes 2 min for inflating(35L/Min) the replaced tire.Build-in warning flash light and LED light enables operation at night,no need to buy additional lighting tools

√Usage electric impact wrench NOTES: One:2 sleeves are available for screws of 4 sizes, pay attention to the sizes when selecting the sleeve; Two: The left side of the power switch marked "II", means loosening the screw. Press "II" and keep holding until the screw has been loosened, remove the nuts.The right side mark "I", means tightening the screw.Same way, keep the "I" side pressed until the screw has been tightened

√SAFE AND SECURE TO USE:Our electric hydraulic jack is will automatically stop working after reaching the height limit.The electric jack head uses a non-slip design:a cross-shaped groove plus particles protruding from the surface to increase friction.The self-locking fully enclosed design,completely waterproof,no oil leakage,to ensure safety during use.

√4 IN 1 ELECTRIC HYDRAULIC JACK: The electric car jack must be used on a FLAT and FIRM ground! This 4 in 1 electric hydraulic jack comes in an electric hydraulic jack, an air pump and an impact wrench. The electric car jack is capable of lifting car(under 5 ton) up to reach its max height(height range:5.9~17.7 inch) within 2 minutes

NOTES FOR USING ELECRIC IMPACT WRENCH: First: Paying attention to the sizes when selecting the sleeve; Second: The signal "II" means loosening the screw, and you have to keep pressing "II" until the screw has been loosened.The signal"I" means tightening the screw, and you have to keep pressing "I" until the screw has been tightened

√SAFE AND SECURE TO USE:Our electric hydraulic jack is will automatically stop working after reaching the height limit.The electric car jack head uses a non-slip design:a cross-shaped groove plus particles protruding from the surface to increase friction.The self-locking fully enclosed design,completely waterproof,no oil leakage,to ensure safety during use

【All in One Repair Kit】This car repair kit includes a 5T hydraulic jack, tire inflator, and impact wrench to meet all your needs for tire replacement and inflation. You can get power from the car battery through the 12V cigarette lighter or through the battery clamp.The electric car jack can lift the car (less than 5 tons) to its maximum height within 2 minutes (height range: 6.1~21.7 inches).

【Portable Tire Inflator】The electric hydraulic jack is equipped with a 150 PSI tire inflator and a digital pressure gauge is installed in it for viewing of inflation pressure. This 12V portable air compressor produces a flow rate of 35L/min, which can inflate your tires quickly,no need to worry about the tire-broken emergency during the journey.

【Electric Impact Wrench】This electric car jack kit includes a portable ergonomic-designed electric impact wrench, and equipped with two detachable heads of different sizes, suitable for most vehicles such as sedans, SUVs, MPVs, trucks, etc

Capacity - 3 Ton (6000lbs), and Lift Range - 6 in. - 21.5 in.

Adapter included increases the overall max lift height by 7.75 in.

Bottom skid plate to keep the jack stable

[SPECIFICATION]: TONDA scissor jack features a lifting range of 4-2/15" to 15-2/13" with a 2 ton (4,000 lb) capacity. It gives you the ability to handle a wide range of vehicles including small cars, sedans, coupes and suvs. Please carefully check whether the lifting height of the automotive is suitable for our car jack before placing an order, so as not to cause trouble to your vehicle

[WIDE BASE SUPPORT]: The solid enlarged base of tire jack measures 4-5/7" x 15-1/13", providing more strength and stability

[Durable Material]: This car jack is engineered using a drop forged alloyed steel construction for quality and durability and covered with a rust resistant coat so as to own a longer service life

[CUSTOMIZED DESIGN FOR RIVIAN]: RIVIGEAR jack pucks are designed specifically to lift the Rivian safely and properly. Protect chassis, battery and aerodynamic panels from damage by wrongly vehicle lifting.

[LIFT YOUR RIVIAN PROPERLY]: The bottom of the Rivian is fully covered in aerodynamic plastic panels and at each corner of the vehicle there exists frame access points, each covered with round plastic caps, requiring the usage of a jack pad puck to allow any jack or lift pad to contact the frame.

[PREMIUM MATERIAL]: Due to the approximately 7,000 lb curb weight, a properly specified jack pad puck is required. RIVIGEAR jack pad puck is precision CNC-machined from T6061 billet aluminum, for proper load rating and lifelong durability, and specifically designed for Rivian fit and usage.

[Customized Design For Rivian R1T R1S]: RIVIGEAR jack pucks are designed specifically to lift the Rivian safely and properly. Protect chassis, battery and aerodynamic panels from damage by wrongly vehicle lifting.

[Neodymium Magnets Top]: Rivian Jack Puck top features 4 neodymium with high adsorption force up to 6000 Gauss, it can be firmly under the car without the rubber ring. The bottom of the Rivian is fully covered in aerodynamic plastic panels and at each corner of the vehicle there exists frame access points, each covered with round plastic caps, requiring the usage of a jack pad puck to allow any jack or lift pad to contact the frame.

[Premium Material]: Due to the approximately 7,000 lb curb weight, a properly specified jack pad puck is required. RIVIGEAR jack pad puck is precision CNC-machined from T6061 billet aluminum, for proper load rating and lifelong durability, and specifically designed for Rivian fit and usage.

[Compatibility] :compatible with Rivian R1T R1S. The jack is designed to lift the Rivian safely and correctly. Protect the chassis, battery, and aerodynamic panel from damage from incorrectly lifted vehicles.

[Lift your RIVIAN properly] : The bottom of the Rivian is completely covered with aerodynamic plastic panels, and at each corner of the vehicle there are frame access points, each covered with circular plastic covers, requiring the use of jack discs to allow any jack or lifting pad to touch the frame.

[Quality material] : Properly specified jack pads are required as the weight of the repair is approximately 7,000 pounds. The Jack Pad is precision CNC machined from T6061 aluminum billet with proper load rating and lifetime durability, designed for Rivian installation and use.

Lifting capacity 88 tons or 176,000 lbs.

Air/hydraulic jack equipped with a dual descent valve for greater control when bearing weight and automatic piston return

Working air pressure 116-145 psi

Ideal for straightening, bending, and removing gears, bearings, and bushings

Winch operated press bed with 7 adjustment levels

Includes 2 pressing plates

4 inches of setback

7.5 inches total lift above stock location

Limited lifetime warranty on structure of jack plate