Best Otc Jack Stands in 2026

Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support

Constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles including small cars, SUVs, and light duty trucks

Adjustable height ranges from 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity

Pair of 3-ton jack stands with 6,000-pound capacity total (when used together)

Self-locking ratchet means no locking key is necessary; meets ASME PASE-2014 Safety Standard for Portable Automotive Service Equipment

Stand can be raised or lowered to the height needed; self-locking ratchet for ease of use

Sturdy stamped Steel Construction with 6 ton capacity

High quality cast ductile iron ratchet bar. Lifting range from 16 in. to 23-1/2 in

Double locks mechanism with both handle locks and mobility pin

Sturdy stamped Steel Construction with 3 ton capacity

High quality cast ductile iron ratchet bar

Double locks mechanism with both handle locks and mobility pin

Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars, ATV's, UTV's, and more

Features a lifting range of 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported

Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%

Heavy-duty jack stands are used to support your vehicle after lifting with a jack

Constructed of high-grade forged steel with a welded frame design for durability

Handles a wide range of vehicles and equipment, including agricultural and industrial applications

Item may ship in more than one box and may arrive separately

Four leg steel base and support tube made of heavy schedule pipe foradded strength and stability

Multiple hole locations in the support tube make pin facilitated height adjustment quick and easy.Number of Height Adjustments:6

6 locking positions allow secure load in multiple height

Heavy-duty flanged base safely secures load

Ultra-lightweight under 10 pounds

Minimum height 13.2 in.

Maximum height is 21.5 in.

Sold individually

Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support

Constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles including small cars, SUVs, and light duty trucks

Multi-position ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place

OTC's S03 3-Ton Steel Jack Stands are constructed with a formed and welded high-quality steel base for strength to provide years of safe vehicle holding

Self-locking ratchet handle cannot be released under load and feature a wide range of locking heights and adjusting positions to provide a universal stand for most vehicles

Form-fit saddle design and wide base ensures stability; Durable baked enamel finish resists corrosion; Welded foot pads resist sinking into soft ground or asphalt

strength and stable - omega lift 32068 is 6 ton jack stands that are designed to support your vehicle after lifting with a floor jack. it features wide pyramid foot base to provide the added strength and stable support.

sturdy stamped steel - it is constructed with the sturdy stamped steel with a welded frame design for durability. with the lifting range from 16 inches to 23-1/2 inches, it gives you the ability to handle a wide range of vehicles including small cars, suvs, and light duty trucks.

double locking pins - it features double locking pins mechanism. with both handle lock and mobility pin, and a large saddle surface area is designed for better contact with the load being supported, adding the extra safety while working underneath a car.

Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support

Constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles including small cars, SUVs, and light duty trucks

Adjustable height ranges from 10-13/16" to 16-9/16" with a 2 ton (4,000 lb) load capacity

Ideal size for holding step vans, vocational trucks and smaller heavy duty vehicles even when loaded, Meets ASME PASE-2019 safety standards

Formed and welded high-quality steel base for strength will provide years of safe vehicle holding

Welded foot pads resist sinking into soft ground or asphalt

1650lbs High Support Capacity: VEVOR's under hoist stand is rated to support 3/4 tons (1650 lbs) capacity. The stand is designed for support and vertical lifting in the automotive repair shop. Ideal for supporting exhaust systems, shock absorbers, and other vehicle components during under vehicle repair.

Adjustable Height Range: Min. Height: 59-inch/1.5 m. Max. Height: 78.7-inch/2.0 m. The all-thread screw rod allows you to make the fine adjustments you need to obtain the perfect working height.

Spin Handle & Foot Pedal: The spin handle of the stand incorporates a thrust bearing that makes it easy to raise and lower, even under the extreme pressures of a heavy load. Foot pedal design for 1" hands-free lift.

OTC's super heavy duty 22 Ton (each) jack stands offer extreme safety and complete peace of mind when working under the heaviest vehicles

Heavy duty pin-style (non-ratcheting) design offers three height settings in 3 inch intervals; 1 inch High-grade steel pin; includes attaching cable and pin collar to keep pin secure when not in use

Reinforced collar meets newest ANSI PALD test standards; heavy gussets, welds, and materials in base, thick walled jack post, and massive pin add up to some serious heft - approximately 40 lbs. each

BESTOOL jack stands boast a distinct design featuring circular base pads and a flat top rubber saddle, providing superior protection to your car frame compared to conventional curved axle post stands. These stands ensure maximum stability and safety, with removable and replaceable non-slip pads.

Our car jack stand is equipped with a mobility pin height adjustment mechanism that offers 7 adjustable positions, delivering flexibility and added security for all your lifting needs.

The rubber circular base pad is specifically designed to prevent paint scratches on your vehicle. The stand is finished with a powder coating to resist rust, and supports a load capacity of 4 tons (8,000 lbs), with a height range of 13.4 to 20 inches.

Aircraft-grade aluminum

Lightweight - less than 5 lbs. each

6 adjusting positions from 9.5" to 15.25"

【LOAD CAPACITY】Single jack stand features a lifting range of 11.3" to 16.8" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported.

【DUAL INSURANCE】Jack stand double locks mechanism with both handle locks and mobility pin which gives you double peace of mind. The removable locking support pin provides added security that increases safety by 200%!

【PREMIUM STABLE SUPPORT】Multi-position ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place. The ratchet bar of the truck jack stands is forged from ductile iron, thickened and forged in one piece, which is not easy to break.

Made in USA

Low Height 11 " Max Height 17 3/4 " Base 10 " x 10 "

Anodized Aluminum Body

Clear multilingual safety and capacity markings

Meets ASME PASE-2019 safety standards

Pair of 6 Ton Jack Stands: AFF 6 Ton Ratchet Jack Stands for supporting automotive vehicles after lifting. Large notched saddles for use with unitized body vehicles, maximum surface area for improved contact with load

Added Stability: Wide pyramid base design for stability. Welded foot pads resist sinking into soft ground or asphalt

Maximum Durability: Built with high grade forged steel and ductile iron support column for maximum strength

OTC's Heavy-Duty, 12-Ton (24,000 lb.) capacity low profile jack stand has the strength and stability needed for big jobs

Rugged formed and welded steel construction incorporates a large spun steel foot that won't dig or sink into asphalt, sand, or other soft surfaces

Round tube center post features 9 height adjustment settings; high strength steel locking pin is attached to the stand with a chain so it can't go missing

Lift pad adapters are used to properly lift most GM vehicles with a hoist or service jack

Adapters sit on the hoist or jack saddle and seat inside frame holes on GM vehicles to prevent saddle lip from damaging frames or subframes

Attempts to hoist or lift the vehicle without lift pads may result in damage to the vehicle

Professional heavy-duty jack stand: 12 Ton (26,400 lbs) capacity fits most vehicles; 12-5/8" to 18-1/8" Lifting range; 42.7 lbs for jack stand pair

Y style head and Large square bottom: Each jack stand provides a large V-shaped saddle to support axles or other components under the truck

Wrought iron self-locking ratchet lever is easy to use, no need to lock the key; When the handle is up, the ratchet can be freely adjusted to any height and wWhen it comes down, the ratchet will automatically lock

Capacity: With a heavy duty 9" x 10" base, this pin-type jack has a 5 ton (10 000 lb.) weight capacity; A critical safety system to help secure load, the pin type post adjusts to 4 height positions from 13" to 17"

Pin Type: The jacks have extra large 2.75" x 4" support saddles for use with unitized body vehicles, providing durability and longevity which makes it ideal for professional use

Package Dimensions: 12.7 L x 109.22 H x 55.88 W (centimeters)

Designed to support vehicle components only

Ideal for exhaust and suspension work

Adjusts from 55" to 85.5"

Ideal size for holding full-size pickups, SUVs and loaded tradesmen vehicles, Meets ASME PASE-2019 safety standards

Formed and welded high-quality steel base for strength will provide years of safe vehicle holding

Welded foot pads resist sinking into soft ground or asphalt

OTC's 4-Ton (8,000 lb.) Fork Lift Jack features a low starting height of 2-5/32 inches and a max lifting height of 17-15/16 inches

When lifting from cylinder saddle, lifting capacity increases to 5-tons (10,000 lb.) with a 16-1/8 inch to 28-3/4 inch lifting range - ideal for agricultural and industrial applications

Unique shape of primary saddle allows for handling of all lift truck configurations with flat or edged surfaces