Best American Standard Kitchen & Bath Fixtures in 2026

SHARKBITE MULTI-TURN STRAIGHT STOP VALVE: Multi-turn straight stop valves are used to allow for easy shut-off of water flow to the end fixture, allowing for maintenance and repair without having to turn the water off to the entire home

COMPATIBILITY: This crimp stop valve works well with PEX and PE-RT pipes; connects to PEX pipes with copper crimp rings or stainless steel clamps

DURABLE AND HIGH QUALITY: These brass crimp straight stop valve fittings are made from lead-free DZR brass for long-lasting reliability; typically used on stub-outs coming out of the wall

Mansfield Dual Flush Valve Tower - 308DF3

Provides a 1.1 and 1.6 gallon flush.

Fits Mansfield Summit tank model 3386.

🔷Toilet Type:One-piece toilet

🔷Dual flush water-saving type,can adjust water in the water tank for all drainage

🔷Fit for 64mm/2.5" drainage hole (Pls check the detailed size)

1.Tank to Bowl Coupling Kits: Universal Tank-to-Bowl gasket repair kit with tank to bowl bolts. In addition to 2 sets toilet tank to bowl bolts and 2 size of gaskets for fit flush valve opening, spare washers and nuts are added for replacement when corresponding fittings are lost or damaged.

2.Fits 2 inch and 3 inch flush valve opening: The kit includes one 2 inch gasket and one 3 inch gasket,no more worrying about buying the wrong size.The Tank to bowl gasket and hardware kit is universal and fits most 2-inch 3-inch two-piece toilet tanks.

3.Tank To Bowl Bolts: The rustproof toilet tank bolts are made of stainless steel, even in the tank with water long-term contact are not easy to rust,ensure long lasting. The bolts are 3.15 inches long, longer than most bolts, long enough to fit most toilet tank to bowl.The bolts are 5/16 "in diameter not 1/4" inch ,more durable and resistant to stress.Special designed nuts are for easy installation.In the installation video, you'll see how easy it is to install the special wing nut by hand.

Easy to Install: 1/2 inch outlet connection,easy to install with some installation parts included.Configuration: ABS hand wheel, aluminum alloy inner core, iron inner rod, stainless steel screw, stainless steel spring, copper lining

Hand Push Design: Hand push type, convenient to use,flexible,saving water greatly,environmental protection.Manual time-extended shut off valve,lasting 4-8 seconds.

Modern Design: Self-Closing Stop Valve Applicable for washing basin and sink.Fashionable and exquisite design,perfectly match your bathroom.

Three inch Flush Valve for Two Piece toilets

7-14 inch Adjustable Bottom Mount Tower Fill Valve

Includes Fill Valve, Flush Valve, Stainless Steel Bolts and Rubber Gasket

AccuSet(TM) piston technology delivers virtually maintenance-free precise flush volume, with a stainless steel self-cleaning filter to protect against clogs or damage

durable cast brass body construction with chrome finish

mechanical override

Instruction:This device is installed between sensor controller and battery case.Plug is connected with sensor controller.When people leave,let the automatic solenoid valve to drain water form the urinal flushing valve.

Usage:It is regarded as the replacement parts or spare parts inside the automatic urinal flusher to ensure the normal usage and improve the service longevity.

Material:The top part (including plug)is made of stainless steel ,the bottom part is plastic(No plug included).

👍Compatibility : Works with one piece toilet with standard 3 in. dual flush valve , and requires 8.5 inches minimum clearance from highest point of the flush valve opening to the top of inner tank. It is not suitable for two piece toilet. The flush valve opening hole is required 3.15” to 3.75”. Double check the 5th graphic on the listing.

👍Dual flush design, full for more power, or the half for water savings

👍Save water: each flush option could be adjusted to optimize performance and control how much water you flush

💪Universal Size: The universal toilet flushing buttons are compatible with most dual flush toilets. We have 2 kinds of sizes: 37mm*47mm, 48mm*60mm. Diameter 47mm is suitable for holes of toilet tank with a diameter of 37mm-44mm; Diameter 60mm is suitable for holes of toilet tank with a diameter of 48mm-56mm. Please check the size of your toilet lid hole before ordering

💪Easy to Install: The toilet flush button replacement is very easy to install. You need to measure the diameter of the toilet port and choose the right size. Open the toilet cover and pull out the old toilet button, then install the new toilet flushing button into the hole. And the rod of cistern standard part can be can be cut to the right length as measured and needed

💪Premium Quality: The toilet push button flush replacement is made of high quality engineering ABS material with advanced plating technology on the toilet button surface, which is definitely sturdy, water proof, durable and colourfast, not easy to corrode, and can be used for a long time in a wet environment such as bathroom

Eco power 1.0 gpf toilet flushometer valve

Concealed valve with Brushed stainless steel cover plate provides an additional level of sophistication

For toilets with 1-1/2 inch back spud inlet

Solid cast brass construction with Accuse Piston Technology with self-cleaning stainless steel filter All brass shut-off with chloramine-resistant face seal

5 year limited warranty; Americans with disabilities act (ADA) compliant and Buy America Act Compliant High back-pressure vacuum breaker with 15-120 psi operating range