Best Incra Layout Tools in 2026

1/16" graduations 0-12 Scale and 6-0-6 Center Scale

Blade machined from aircraft-grade aluminum and anodized for surface protection and appearance

Precise laser engraved markings, 1/16-inch graduations

Precise, versatile, and easy-to-use are the words which best describe the Incra 6-Inch Precision Marking T-Rule

Think of it as a combination square for marking or measuring that's simultaneously set to every scale position with perfect, instant accuracy

There are micro-fine marking holes and slots at every 1/16-, 1/32

12" Centering Rule with protractor feature and precision marking holes at every 1/32"

Micro-fine marking holes and slots place your mark exactly on target

Mark the center of your work piece quickly and accurately

Accurate Metric T-Rule

Instead of squinting at that blur of lines along the edge of your old steel rule

Incra has re-invented the steel rule by putting micro-fine holes at every scale position

Using a T-square this guide draws perfectly placed horizontal lines with dead-on accuracy, with guide slots that wrap around any edges

Includes Pro T Rule with marking holes every 1/64", 1/100" and 1/2mm

Set includes Marking Rule, Bend Rule, Pro T-Rule and .5mm pencil

Micro-fine marking holes and slots place your mark exactly on target

3" by 4.5" size fits in your shop apron pocket

INCRA's patented marking holes at every 1/16th, 32nd, and 64th from 0 to 3 inches

Micro-fine marking holes and slots place your mark exactly on target

Micro-fine marking holes and slots at every 1/16", 1/32" and 1/64" instantly locate a sharp pencil point or scribe EXACTLY where you want it.

Instantly mark your position with zero uncertainty, zero parallax and zero eye strain

Flexible structure for working on curved surfaces

【Save You time】:Micro-fine marking holes slot at every 1/16-, 1/32-, and 1/64-inch scale position.Locate your sharp pencil or scribe with absolute precision.This T-Rule work beautifully to draw lines exactly where you want them to be, which is very suitable for woodworking and will be a good helper for you.

【Clearly Identifiable Scale】:The T-rule finishing features low glare and protective powder coated. It has permanent deep markings and graduations for max Readability. This is a T-Rule which can give you higher accuracy,clearer scale,better line drawing.

【Durable and sturdy】: The Stainless Steel T-rule is made of good quality Stainless Steel 304, durable and sturdy;A good measuring tool, easy and convenient to use.The stainless steel T-Rule of combination square has deep etching scale for superior legibility and long-lasting usage.

The Bend Rule draws perfect horizontal lines using the end marking holes while sliding the rule along the edge of your work.

Marking slots every 1/16" wrap around your edge to provide dual-surface marking accuracy.

INCRA Bend Rules make dual-surface layouts a snap using the corner slots shown above.

MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics

HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines; Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in

SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can draw any line you want with this ruler

Pro T Rule with marking holes every 1/64", 1/100" and 1/2mm

Micro-fine marking holes and slots place your mark exactly on target

T-bar follows the edge of your work piece to mark perfectly placed horizontal or vertical lines

Five Versions: 8inch,12inch,24inch,300mm,600mm. The 8inch,12inch and 300mm size is ideal for work with solid lumber and furniture parts. The 24inch and 600mm are intended for cabinetry work in the layout of sheet goods, large cabinet parts, entertainment centers and bookcases.

Precision: On the two outer edges of the blade, there are laser engraved lines every 1/32" , and the blade itself has precisely spaced 1.3MM holes drilled every 1/16". Stick a pencil in the hole, slide it along your workpiece and a perfectly spaced line accurately following the stock edge.

Humanized Design: The inch or metric scales are very clear and readable even for olders and poor lighting conditions. The blade edges are machined to a 45 degree bevel, The beveled design reduces parallax and increases measuring and marking accuracy.

Marking holes at every 1/4 millimeter.

【Premium Quality】This T-Square Ruler is made of high-quality aluminum alloy with an anodized red treatment that is durable, sturdy, and has excellent anti-oxidation properties. Its precision marking requires a mechanical pencil and its rust-resistant finish guarantees long-lasting use, making it ideal for woodworking and DIY projects.

【Precise Marking】This T-Square Ruler is portable and features laser-engraved lines and precisely spaced holes every 0.063in and 0.13in for accurate and precise marking in woodworking projects. The compact design makes it easy to store and transport, while the high-quality aluminum alloy construction ensures durability and resistance to corrosion, making it a valuable tool that will last for years.

【Professional Design】Measuring 12 inches long, our T-Square Ruler is perfect for home DIY and woodworking measuring tools. It features two support lips to prevent tipping and a perfectly machined edge for true squaring.

300 mm Precision Bend Ruler

Made in the USA

Stainless Steel

PERFECT FOR DIY WOODWORKING - Package Includes 6 inch/160mm, 8 inch/210mm, 12 inch/300mm pocket woodworking rulers. T square ruler can be used in workshops, home improvement, toolboxes, cabinet. With inch and metric indicators, this woodworking ruler allows you to identify required measurement unit immediately since there are measuring scales on both sides. All four edges feature an engraved scale incremented every 1/16th or 1mm depending on style.

LASER ETCHING TECHNOLOGY - Pocket ruler is made of superior aluminum alloy and made by CNC process. The surface is smooth and anodized, durable and rust resistant. Adopt the advanced laser engraving technology, the numbers on the surface of the measuring ruler is more acurate and easy to read.

BUILT-IN SLIDE STOP - Machinist ruler is built-in slide stops, which can go through the entire length of the ruler. This helps with making repetitive measurements on multiple boards. Carpenter tools comes with adjustable positioning lock, the slide stop can be secured tightly with the thumb screws on the lock and effectively prevent slippage. There is a small notch in the end of the ruler to place a pencil for scribing!