Best Plastic Light Sockets in 2026

Lighting For Lower Spots: This 12ft hanging lamp cord features a ON/OFF switch closer to the bulb end, which is intended for lighting at lower locations like desk lamps, night lights, floor lamps, plant lighting. For hanging lights from ceilings and other higher spots, please go with another 12ft model with the switch near the plug by searching asin B08CDW21QV.

UL Listed: The whole cord, from the 2-prong AC plug to the E26 socket, are UL approved. The hanging cable works with any type of E26/E27 bulbs. Tip: To prolong the product’s lifespan, please avoid using high-wattage bulbs that can overheat the socket.

Easy Setup: Just screw in a E26/E27 bulb in the socket and plug in. Each cord is supplied with 2 S hooks and 2 J hooks for hanging up in minutes.

Transforms your GU24 fixture to fit standard medium size bulb (E27/E26). Please check the product size details map before purchasing.

This light adapter can replace your CFL light by a common Edisonamp bulb. Tired of expensive GU24 base bulbs, Never again!!!

Fits for all standard bulbs. Easy to use, just twist into existing socket. 2 Years Warranty!

Specifications: Works with T8 and T12 lamps with medium bi-pin base. Max Wattage: 660W; Max Voltage: 602V. Great for retrofitting your fluorescent fixtures to LED tubes, replacing old florescent lamp holders and more.

UL Listed: Made from high quality fireproof PC, the T8 lamp holders are heat resistant and 102% safe from fire hazard, durable even after years of use.

Easy to Use: Get your project done in minutes with JACKYLED T8 Lamp Holder Socket Tombstone with 10” 21 AWG Wire(if you want to change wire,holes for Max.18 AWG Wires). Just connect the wires, plug the tube in and twist, a plug-and-play solution for your lighting projects.

DiCUNO standard E26 bulb socket adapter, splits your standard socket to 2 polarized outlet and 1 bulb socket.

◆NOTE◆ The 2 outlets are POLARIZED without ground prong. Please be informed and confirm it is what you need before purchase. ★For safe use, please read the detail product description carefully.

[Handy Item] UL listed converter made of plastic. High quality with easy installation. Just turn off the power, screw it into your E26 socket securely and you will have 2 additional outlets.

Item Weight: 0.29 lb

Country of Origin: Canada

Brand name: Leviton

Perfect for closets, basements, utility rooms

2 terminal screws

Fits 3-1/4-inch or 4-inch outlet boxes

Wattage: 660.00

Voltage: 250.00

Lamp Holder - One (1) 250 Volt, 250 Watt Ceiling Lamp Holder

Use - This incandescent ceiling lamp holder adds extra shine to your product by providing reliable indoor lighting

Quality Materials - Plastic lamp holder with medium base for indoor lights is made of sturdy plastic for durability

Great for DIY new light or fixture replacement

Perfect for closets, basements, Utility rooms

2 Terminal screws - side wire with grounded outlet

Fits 3-1/4" or 4" Outlet Boxes

DiCUNO E12 candle socket cover, suitable for E12 chandelier/candelabra sockets. Decorate your fixture with this cover, making it a more candle look.

☀NOTE: This socket cover is for E12 candelabra base bulbs. Please must check its compatibility with your bulb/socket.

Dimension: 4.13 inches tall with a diameter of 0.87 inches. Color: Off White

Sturdy Aluminum Material -Metal does not be warped/melted due to heat.Replace the plastic rings that came with the light fixture,the aluminum construction provides extra durability

COMMON SIZE -1-1/2 inches(39MM) inside diameter,2 inches(50MM) outside diameter.Work on 2-1/4 inches glass shade and more light fixtures

WIDE APPLICATION -Use with medium base threaded sockets to secure glass lamp shades,work on the light fixture over the mirror/vanity lights or lamps in the bathroom,install new glass sconce covers,fix chandelier,replace the original plastic keeper/old ring ect

5.9ft (1.8m) Long hanging light cord with E26/E27 socket.

Perfect used for E26/E27 bulbs, Paper Lanterns, Sconces.

High quality plastic plastic shell,this socket adapter comes in a solid construction.

【3-Prong Socket Plug】This well-function light socket adapter can provide stable electrical contact with your appliances. The 3-prong design can both support 2 prongs and 3 prongs, which has wider application range than 2-prongs light socket to plug adapter

【Premium Quality E26/E27 Light Socket Outlet】This light socket to plug adapter is made of fire-proof material PBT that is high temperature-resistant up to 165℃. This 3-prong light bulb socket adapter is powered by 125V AC and electrical rating 1250W Max Wattage. Note: This light socket outlet is not suitable for connecting high-power appliances, you need to check whether the appliances exceed the maximum power rating of this light socket outlet before use

【Safe and Polarized socket outlet】The 3 prong light socket adapter is designed to supply electricity to electrical appliances safer. This light bulb plug is polarized that can only allow you to insert the plug into outlet slots in one direction, which ensures neutral-to-neutral, hot-to-hot, and that can provide a measure of safety for the appliance is aligned with house wiring in terms of polarity

Perfect for closets, basements, Utility rooms

4 Terminal Screws

Fits 3-1/4-inch or 4-inch Outlet Boxes

[ROUND CABLE WITH 2-CORE COPPER WIRE]-Single socket pendant light cord kit for lanterns (2-Pack,15 feet, Black). This lamp cord has an inline switch and has a standard plug for U.S. Electric systems. Distance from the switch to the plug is about 3.3 feet.

[CORD THUMB TOGGLE SWITCH]- This hard plastic component that connects directly to the cord is a great addition for our hanging pendant light kit. You can easily turn bulb socket on and off with flip of your thumb.

[COMPATIBLE WITH E26/E27 BULBS] -Standard medium E26, E27 (normal light bulb socket).Use a standard type light bulb, maximum wattage on this cord is 360 watts, for use with our hanging lantern cords.(No Bulb Included)

6 Complete Sets of Adjustable Candelabra Sockets With Paper Insulator Covers and White Plastic Candle Cover Sleeves for one low wholesale price!

Replace your discolored old , broken or missing chandelier covers or re-wire a chandelier or lighting fixture with these candelabra socket sets.

The bracket has a 1/8 IP threaded hole on the bottom so it will fit any standard 3/8" lamp pipe or threaded rod or nipple.

【3-Prong Socket Plug】This well-function light socket adapter can provide stable electrical contact with your appliances. The 3-prong design can both support 2 prongs and 3 prongs, which has wider application range than 2-prongs light socket to plug adapter

【Premium Quality E26 Light Socket Outlet】This light socket to plug adapter is made of fire-proof material PBT that is high temperature-resistant up to 165℃.This 3-prong light bulb socket adapter is powered by 125VAC,1250W Max Wattage. 𝗡𝗼𝘁𝗲: 𝗧𝗵𝗶𝘀 𝘀𝗼𝗰𝗸𝗲𝘁 𝗶𝘀 𝗻𝗼𝘁 𝗳𝗶𝘁 𝗳𝗼𝗿 𝗰𝗼𝗻𝗻𝗲𝗰𝘁 𝗵𝗶𝗴𝗵 𝗽𝗼𝘄𝗲𝗿 𝗮𝗽𝗽𝗹𝗶𝗮𝗻𝗰𝗲, 𝘆𝗼𝘂 𝗻𝗲𝗲𝗱 𝘁𝗼 𝗰𝗵𝗲𝗰𝗸 𝘄𝗵𝗲𝘁𝗵𝗲𝗿 𝘁𝗵𝗲 𝗮𝗽𝗽𝗹𝗶𝗮𝗻𝗰𝗲 𝗲𝘅𝗰𝗲𝗲𝗱 𝘁𝗵𝗲 𝗿𝗮𝘁𝗶𝗻𝗴 𝗼𝗳 𝘁𝗵𝗶𝘀 𝘀𝗼𝗰𝗸𝗲𝘁 𝗯𝗲𝗳𝗼𝗿𝗲 𝘂𝘀𝗲

【Safe and Polarized socket outlet】The 3 prong light socket adapter is designed to supply electricity to electrical appliances safer. This light bulb plug is polarized that can only allow you to insert the plug into outlet slots in one direction, which ensures neutral-to-neutral, hot-to-hot, and that can provide a measure of safety for the appliance is aligned with house wiring in terms of polarity

Feature: The 5mm LED lamp holder is made of Copper with Chrome plated. Copper immediately offer a quality advantage, more waterproof than plastic to keep the integrity of the enclosure.

The support of this LED mount is made of plastic,that can hold the LED firmly. Housing color is black. Easy to use and install, very practical.

Size: Fit LED Diameter: 5mm (0.2 inches); Thread Diameter: 8mm (0.3 inches); Total Length: 15.2 mm (0.6 inches).

SAFETY AND GOOD QUALITY: UL standard. Aplstar E26 light socket is made of special material for fire resistant, heat resistant and corrosion resistant. Very good-quality metal and plastic make your home, office, and patio, DIY project safe and reliable.

SIMPLE DESIGN: Black Retro lamp holder will be perfectly mixed with different shape, it comes with the diameter 1.57inch (4cm) adjusted ring, you can use or remove it.

ATTENTION: The socket is up to 250 Watts MAX and Up to 250 Volts MAX. Be careful for the dimension before your order.(Please check the display pictures).

Material: Made of high quality plastic, environment-friendly

Dimension: 13/16" inner diameter by 4" in length， and outer diameter 7/8"

Sturdy and Safety: These candle covers are a thicker plastic material, and easy to install

SAFETY AND GOOD QUALITY: UL standard. Aplstar E26 light socket is made of special material for fire resistant, heat resistant and corrosion resistant. Very good-quality metal and plastic make your home, office, and patio, DIY project safe and reliable.

SIMPLE DESIGN: Black Retro lamp holder will be perfectly mixed with different shape, different color light bulbs. The Standard Screw-in design is quite easy to be installed.

ATTENTION: The socket is up to 250 Watts MAX and Up to 250 Volts MAX. Be careful for the dimension before your order.(Please check the display pictures).

Dimension: 0.78" (20mm) inner diameter, 4" (105mm) tall. Please measure in advance whether the width of the lamp holder corresponds to 0.78 inches to avoid undersize.（Please check the 4th size picture.）

Suitable for: The candle socket covers to fit standard candelabra base E12 lamp Sockets.

Material: Our candle socket cover is made of high-quality fire retardant PP white plastic and is very environmentally friendly.

【High Quality Material】: E26 E27 base socket is made of high quality plastic, very durable & corrosion-resistant. Standard Screw-in lamp socket holder.

【E26 E27 Medium Base & 4ft Cord】: Suitable for all E26 E27 light bulbs. The screw port fits for E26/E27 blub. It fits E26 wire and light source in the USA, and E27 wire and light source in Europe. Maximum wattage 250W, voltage range 0-250V, rated current 5A. It fits for 1 inch / 2.6cm lamp cap & 0.75mm copper core wire.

【Hanging Screw Kit & Easy to Install】: Standard Screw-in lamp socket holder, threads and hanging screws kits makes it easily to control and install. You can get the cord length you want and cut before installation. No hard wire installation required.

Standard. ACBungji light bulb socket has an electrical rating of 250VAC and 250W,fits for 1 inch/2.6cm lamp cap.

Easy to Wire Up. Built in thread nut and screws,well constructed with 3 parts,easy enough to install with your light fixture.

DIY Lamp Projects. Simple upgrade to your old lamp socket,such as Edison bulb,CFL bulb,LED bulb,hanging light,pendant lamp,outdoor light.

Suitable for: This candle socket cover is for E12 candelabra base. Please must check its compatibility with your bulb/socket.

Application: Great for replacement older chandeliers covers, it fit to most E12 socket chandeliers. Decorate your fixture with this cover, making it a more candle look.

Material: 4 inch Tall candle socket covers are made of high-quality fire retardant PP white plastic and is very environmentally friendly.100 degree heat resistant. Easy to install.

【Main Feature】This E26 /E27 light socket is made from bakelite with a metal core, making it resistant to heat, flame and corrosion. Equipped with threaded cable grips for locking and protecting wires, prolong its service life.

【Simple and Convenient】The Zevnico lamp holder is designed with screw-in threads fixings for easy installation, attached adjustment shade ring (Diameter 2.125" / 54mm), can be used to secure a variety of lampshades.

【Safe and Durable】Pack of 8. Assembly overall height: 3.18" (81mm), bottom diameter 1.25" (32mm). Our E26 /E27 lamp holder is UL approved, rated to 100W and 250V, mainly for a long term indoor use.

Light Socket Extension,E26/E27 to E26/E27 Adjustable Neck and Head Vertically Angles Up to 90 Degrees . Head can also rotate 360 degrees in either direction Horizontally.boost the brightness and have a broader light coverage.Small size, light weight and flexible to adjust，Professional made with good performance.

E27 male plug to E27 female socket base Works for 110-250V and up to 150W lighting with .Durable and Long Life, Flame-retardant PBT plastic and stainless steel.heat-resistant up to 160 °C .

Suitable for installation in any indoor dry place, such as garage, workshop, shed, office, etc. It is also a great partner for your recessed lighting, track lights, ceiling fixtures adapter.

Application -Replacement for chandelier candle bulb covers in your hanging chandelier lamp, refresh an old chandelier appearance,replace the white sleeves when the tops looked burned or discolored,great to replace old, cracked and yellowed lamp sleeves

Hole Size -The Sleeves have a 0.82" inside diameter and 9/10" outside diameter.Make sure your chandelier socket are E12 socket or measure your current candle cover sizes before ordering

Material -Tough plastic like your bank card.The white plastic is flame retardant ABS material with thickness 4/5 inches

Package included: 1pcs

Product length: 12inches

Material: metal, plastic, PTB