Best Spdt Lighting Relays in 2026

Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for

12-volt 5-prong relay. Excellent water-repellent and dustproof ability, but not using it in water

Be careful when inserting the relay into the socket. If you force it, you will bend the female connectors

Built in fuse socket with included 30A blade fuse with heavy duty 14AWG wires for main contact.

Bosch style 4-Pin SPST (Single Pole Single Throw) Relay.

12VDC (14V Max) and 30A High Switching Capability.

Direct replacement - this instrument panel lens is made to match the fit and performance of the original lens on specific vehicle applications

Ideal solution - reliable replacement for a lens that has clouded, faded or cracked over time

Durable construction - this part is made from quality materials to ensure reliable performance and long service life

High switching capability: Normally open 40A/14V DC and normally close 30A/14V DC. Suitable for Nilight LED light bar wiring harness kit

Premium quality: Durable relay and harness socket with 5 wires; Made by high-grade materials to ensure superior quality and long lifespan

Male-female slot design: Unique male-female slot design, easy to connect the relay with harness socket, clean and neat after installation

The 12v relay harness base contains 3*12 AWG and 2*16 AWG cables, length: 5.5 in, which have higher load-bearing capacity and more stable performance.

Function: 12VDC (14V Max) 5 Pin SPDT (Single Pole Double Throw) Relay with 40A/30A High Switching Capability.

Wire Specifications: White - Ground (85), Blue - VDC (30), Black - Trigger (86), Red - Output N/C (87a), and Yellow - Output N/O (87).

HQRP® Contactor;

UL Listed; 4-Pole; Rated for 40 Amps; Coil Voltage: 120V AC; Compact Size; Weld-Resistant Silver Cadmium Oxide Contacts; Reinforced Thermoset Polyester Housing; Quiet Operation;

Compatible with C25ENF440A 42CF25AFBBZ CR353AD4BA1 3100Y40T10999

SPDT Relay - Single Pole Double Throw, you can use them to open or close a circuit -- or go from bright to dim on your headlights

30/40A Relay – It is rated to handle 40 amps of load at 12V DC in the Normally Open position (PIN 87), and 30 amps of load at 12V DC in the Normally Closed position (PIN 87a). You can use it in any circuit less than 30A

With the Wire Harness - Makes relay installation a breeze. If one goes bad, just unplug it from the socket and plug in a new one

PLUG AND PLAY, Work to replace Factory Flasher Relay for 2014-2022 Honda Grom 125, 2009-12 Kawasaki ZX6R, 2008-12 Kawasaki 250R, 2013-17 Kawasaki Ninja 300, 2015-2022 Kawasaki Z300

A MUST HAVE ITEM, If You Want Upgrading Stock Bulb to LED or for Your Exist LED Tail Lamps of Turn Signal lights.

Operating Voltage: 12V (11V-15V). Max Power: 42W. Switch Power: 0.02A to 12A. Working Temperature: -40°C to +80°C

1order = 4 Pieces

Special features: Relay For FUSION F150

Better Performance

Fits 1994-2013 EZGO Golf Cart medalist and TXT models.

Direct replacement to those rusted or missing top support struts on your Ezgo golf cart.

Meets OE Standards and Specifications, Perfect match as the original part. Easy to install.

1 piece 5-Pin 12V 30A SPDT cube-style Relay (size: 1.65" x 1.25" x 1.25", the time delay relay box is taller than regular relay box, please see picture-7 to confirm the size before buying)

Allow approx 10 seconds delay to turn on the light

Good for most car/motorcycle retrofit lights that do not have switch or want to delay the turn-on time to protect the battery or circuit/fuse, perfect for high power lighting applications such as LED light bar, LED work lights, HID system, etc

Vehicle Specific

Manufacturer Warranty

NIssan Quality Assured

NEW: 8 pin 12v lamp control relay bulb check relay, factory tested for proper performance.

COMPATIBLE WITH:Fits for 1999-2009 SAAB 9-5,1999-2003 SAAB 9-3,1992-1998 SAAB 9000,1994-1998 SAAB 900, OEM 4109070 28349070.

HIGH QUALITY: Made of high quality materials to withstand intense vehicle heat and cold weather condensation, which can damage low quality relays.

Input Voltage: 4-32VDC; Output Voltage: 5-250VDC; Max Load Current: 10A.

Size: 45 x 57 x 28mm/1.76x2.25x1.1inch(L*W*H)

Sealed high temperature resistance housing;Resin protective cap;Perfectly soldered copper post.

Standard Instrument Cluster Voltage Regulator (VRC604)

Part number: VRC604

Fit type: Vehicle Specific

Package quantity: 1 piece EP-27 flasher relay

Fix for Turn Signal, Hyper Flashing, Blinker LED Light

Produce no heat compare with those load resistors, plug and play, easy installation.

Replacement 2-wire low voltage relay for Touch-Plate systems installed between 1946-1985

Designed as a compatible replacement for the following Touch-Plate models: 1550-A, 1550-B, 2500-B, and 4000

Rating is 120/277VAC 20Amp 1.0HP 125VAC, 1.5HP 250VAC

SUPER MATERIAL: Made of high quality use semiconductor components. epoxy resin potting, threaded terminal wiring, high structural strength, impact resistance, strong shock resistance, small driving current at the input end can easily interface with computer terminals and various digital programmed circuits. Beautiful and generous, excellent electrical conductivity, safe and reliable, long mechanical life.

PACKAGE INCUDIGN: Include 2pcs solid state relay module, F type male connector easy for install simply push on it to the intended female connector antenna connection.

CONVENIENT TOOL: The shell of solid state relays is made of ABS flame retardant plastic material, waterproof, moisture proof, wear resistant, high temperature resistant, dustproof and oil resistant. The internal structure adopts a high-efficiency spring structure and has a high life. High mechanical strength, reliable and stable.

This DENSO Fog Light Relay is compatible with Toyota Matrix 2008, 2007, 2006, 2005, 2004, 2003 and is perfect for a tune up or performance upgrade.

PREVENT HEAT SHOCK AND ARCING: The DENSO Fog Light Relay, also known as a fog lamp relay, is a reliable electromagnetic switch known for its shock resistance, reduced arcing, and thermal protection. In particular, the fog light relay, operated by a small current, activates the fog lights. Return the fog lights to full functionality with the DENSO Fog Light Relay which features low heat generation and reduced electrical loads

MAXIMIZE SERVICE LIFE: The controlled contact force and self-adjusting air gap increase the life of the internal parts. The DENSO Fog Light Relay features lead-free, solderless construction which offers thermal protection and prevents arcing. These relays are engineered to meet the most stringent automaker standards and built to last. Offering the same performance and dependability as OE parts, the DENSO automotive relays showcase the lowest return rates in the industry

Product Name : PCB Electromagnetic Power Relay;Model : JQC-T78-DC05V-C;Coil Voltage : DC 5V;Contact Capacity :20A 125VAC/20A 14VDC

Number of Pins : 5;Contact : SPDT;Size (Approx.) : 15 x 12 x 17mm/0.59" x 0.47" x 0.67" (L*W*H):Color : Black;Weight : 28g;Package Content : 5 Pcs PCB Power Relays

The surface is made of PC material,Flame retardant, high strength, high-temperature resistance and deformation resistance, Good metal pin, good conductivity, less heat, and stable resistance

1 piece 5-pin relay with pigtails

Relay spec: 12V 40A, 5-pin SPDT

Perfect for any 12V car, SUV, truck, bike or boat for headlight angel eye retrofit, add-on fog lights, LED daytime running lights, etc

100% Brand New, High Quality

Domestic US Seller, Lighting Fast Shipping

Three Monthes Warranty, Hassle free Return, Money Back Guarantee

Direct Replacement

High quality construction

Top quality products

Material: Metal, Plastic, Electric Parts

Net Weight: 101g; Item size: 6.2 x 4.5 x 2.3cm/ 2.4 x 1.8 x 0.9inch(L*W*H)

Package Content: 1 x Solid State Relay; Mounting Method: Bolts Fixed

Vehicle Compatibility - Fog Light Compatible with 2005-2011 Toyota Tacoma/2004-2006 Toyota Solara/2008-2015 Toyota Sequoia/2007-2013 Toyota Tundra. Reference Part Number: TO2592117, 1631260

Fast Shipping - Directly shipping from the USA.

Durable Structure - The well-sealed fog light can prevent moisture or dust from entering the inside of fog lights in all weathers, to ensure excellent weather resistance, and impact resistance.

【4 Pin Relay】: Heavy duty 4 pole SPST relay is 12v 40amp. Model : JD2912-1H-12VDC 40A 14VDC. With a mechanical life of 10,000+ cycles, it is ideal for any 12V application.

【Waterproof & Durable】: The electrical relays are made of high quality ABS housing, copper coils and silver contacts. Its housing has excellent water resistance and will not easily fail even when working in wet environments. The pins have very good conductivity and do not rust, corrode or oxidize easily. We are committed to practical and safest raw materials to bring you the most perfect products, so you can rest assured to use.

【Wide Application】: Widely used to install electric cooling fan, electric fuel pump, electric water pump, shaving door handle solenoid, trunk solenoid, horn, etc. You can also use it for automotive lighting systems, engine compartment electrical boxes, air conditioning systems, circuit modification and other equipment.

FITMENT - The fog lights compatible with 2011-2013 Honda Odyssey. Partslink Number: HO2592129, HO2593129.

FEATURE - Replace old and worn-out fog lights and give your vehicle a fresh new look. The lamp are made of first class plastic, durable enough to last through any weather conditions.

NECESSITY - Our fog lights provide clear view area in rain, fog and snow. Help you see the road ahead, improve visibility and overall safety.

Model: LSR1-1-325DA Solid State Relay 25A DC to AC

Material: Metal,Electrical Parts

Input voltage: 3-32V DC; Output voltage: 24-440V AC

EXCELLENT PERFORMANCE--- This car’s front bumper fog lamp has a builtin super bright LED, which makes it easy to identify the car on the road in rainy or foggy days. The convex lens design spreads the light evenly, making the car visible at a longer distance.

WIDE APPLICATION---This car front bumper fog lamp is shockproof and waterproof, and suitable for MK5, RABBIT, PLUS 2005-2009, EOS 2006-2010, CADDY 2004-2010.

HIGHQUALITY MATERIALS--- This car front bumper fog lamp is made of highquality ABS plastic material, which is durable and does not fade, and high strength, is not easy to wear and corrosion. long lasting.

Fitment: Please check Amazon Fitment Filter and Description to see if this item will work on your vehicle before purchase!

Note: Slight Modification May Be Necessary For Gl650

Placement On Vehicle: Left