Best Submersible Marker Light Assemblies in 2026

Mini Size Bright Light For Your Night: Each 3/4” mini side marker light comes with 3PCS SMD LEDs inside, outputs 60 lumen bright light to safe your night. Work perfectly for 100, 000 hours lifetime.

Surface Mount & 2-Wire Design: Light comes with rubber grommet for surface mount, 3/4” hole size. 9inch 2-wire leads with black for ground/negative while yellow for positive.

Maximum Durability: Waterproof PC lens, rubber cover sealed light and potting glue sealed wire combined makes the light super durable, waterproof rate IP68. No cracks forever.

Exact fit to OEM#: F2UZ 13200 A and Partslink#: FO2521122

Meets or exceeds DOT & SAE compliance standards

Unit includes lens and housing only - bulbs sold separately

Compatible with 2008-2017 Mitsubishi Lancer includes Evolution X, 2011-up Mitsubishi Outlander Sport, 2014-up Mitsubishi Mirage

Please note that not all Mitsu has side marker lamps, please make sure yours come with OEM side markers in order to use this product!

Includes one pair (driver and passenger sides) dark smoked lens amber LED front fender side marker lamps with sequential flash turn signal feature (Replace OEM part# 26160-8990A)

Partsam (2 x Amber) side marker LED clearance lights, each light with 6 LEDs inside; 4" x 2" Rectangle. Built-in reflex reflector removes the need for a separate reflector. Snap-on, replaceable, durable lens with white base. Surface mount . 2-Wire design

DOT Approved. Function as front / Rear clearance Lights Lamps, side marker lights or identification light,Trailer Light etc. Universal for 12V vehicles like Pickups Truck Trailers SUV van Caravan and Boat Lorry Bus etc.

Features sonically sealed, waterproof lens and housing in a single unit; Two-wire design includes both lead wire and ground wire for mounting to all surfaces.

oe-comparable harness (no pigtail connector) for hassle-free installation

oe-comparable mounting provisions ensure drop-in precise fitment

rigorous and accelerated cycling tests to ensure product service quality and durability

Part # 264155BK, Exact Fits for 2002 - 2007 Sierra Silverado 1500 1500HD 2500 2500HD 3500 trucks with factory installed cab marker lights. 2007 Silverado 1500 1500HD 2500 2500HD 3500 Classic trucks.

Built with 30LED Beam, provide super brightness and enhance visibility when driving at night.

With IP65 Waterproof design, No worry about driving in foggy day, heavy rain and snow.

Direct replacement - this turn signal light assembly matches the fit, function and appearance of the factory assembly on specified years, make and models

Ideal solution - reliable replacement for an assembly that has failed due to moisture infiltration or collision damage

Durable construction - this assembly is made from quality components to ensure reliable performance and a long service life

Exact fit to OEM#: 929918, 929917 and Partslink#: GM2551108 GM2550116

Meets or exceeds DOT & SAE compliance standards

Unit includes lens and housing only - bulbs sold separately

Exact fit to OEM#: 81620-04090-C0, 81610-04090-C0 and Partslink#: TO2520163 TO2521163

Meets or exceeds DOT & SAE compliance standards

Assembly includes bulbs, lens, housing, and socket

Brock is a Trusted Name in Aftermarket Auto Parts Since 1960

Meets all safety and quality standards. OE Style; High Quality with precise fit and reliable function.

Manufactured to fit and work exactly like the original

Featured Functions: Used as led marker light in front, rear side roof top or led clearance light indicator light on any 12V pickups truck trailers SUV RV van caravan camper boat lorry bus etc.

Upgraded LEDs: Use 3 quality Piranha LED, featuring better heat dissipation, wider lighting angel, higher light intensity, and longer lifetime, make the light super durable and outputs excellent amber light

Awesome Reflector Design: The marker light employs a micro-reflex faceted reflector design, increasing the light output and adding on an exquisite appearance

Adequate in quantity: the package comes with a total of 10 pieces of LED trailer marker lights for trucks in 2 different colors, including red and amber, each color has 5 pieces, and 20 pieces of screws; The quantities and colors are sufficient for you to use and replace, and can easily meet your daily use and other requirements

Easy method to operate: we have prepared 2 pieces of screws for each trailer running light, you can conveniently and easily apply them; What's more, red is the positive electrode and black is the negative electrode, the installation can be completed by tightening the screws

Match diverse cars: these trailer marker lights are suitable as LED marker lamps, car side lamps, trailer lamps for many kinds of cars, such as trucks, trailers, horse trailers, travel trailers, boat trailers, RVs, and more

Package includes 2 Pieces 2" x 6" Rectangular Trailer Marker LED Lights 3 Wires in Clear Lens, 20 Led diodes per light; Designed at 12 DC Volts; Sealed Light, 3 Wires Setup, High Low Function. Other accessories are not included;

6" amber led marker lights 3 wres in clear lens: 6 inch rectangle LED lamp for use as a combination turn signal lights and running lamps, can be installed anywhere you'd like to surface mount them. This is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker light (or only an auxiliary turn signal light) by using two wires and leaving the third wire unused;

Hardwired with 3 wires: White is ground, black is low brightness as marker lights or running lights, red is high brightness as turn signal lights; Size: 6" x 2" x 1.4" approx. and hole to hole distance: 4.8";

4 pieces (2 pieces with Amber LED lights for front and 2 pieces with Red LED lights for rear); Powered by 3 pieces super bright Flux LED lights inside

Come with 168 194 adapter and double sided tape for easy installation; Replace Part # 264133BK

Fits Silverado and Sierra 2500 3500 HD with existing amber/red lens side markers, but this product will also fit any other truck with some mods and wiring required

Compatibility: These Full Amber Led Fender Side Marker Lights Replacements only suitable for Wrangler TJ 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 Wrangler tj side markers. NOTE: These are aftermarket products. Pls check the compatiblity first before you buy;

Package includes 1 left (driver) side and 1 right (passenger) side Wrangler Signal Marker Lights Lamps Assembly, Amber Lens and White Led, other accessories not included. Part number: 55155628AC, 55155628AB, 55155629AC, 55155629AB, CH2550120, CH2551120;

Upgrade Design: different form those tj side blinker covers on market, these tj marker lamps are assembly with led lights. Each side marker built in 18 pieces 3528 LED Chips, provide super night visability of your vehicle on the road. And these side indicators built in reflex reflector lens, which removes the need for a separate reflector;

Exact fit to OEM#: 5976405, 5976406 and Partslink#: GM2550140 GM2551140

Meets or exceeds DOT & SAE compliance standards

Unit includes lens and housing only – no bulb(s)

Compatible with 2011-2015 BMW F25 X3, 2007-2013 BMW E70 X5, 2008-2014 BMW E71 X6

Includes one pair (driver and passenger sides) clear cover lens amber LED front bumper side marker lamps

Each piece is powered by 20 pieces of high power amber SMD LED diodes to form a perfect focal strip with a super bright lighting output and sequential flash/scroll feature when engaging the turn signal

Fitment: Compatible with Jeep Wrangler 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006.

Package Includes: 2 x Signal Side Marker Lights Lens. (Driver and Passenger) + 2 x LED Amber Light Bulbs.( LED light bulb non-polarity, don't need to worry about positive and negative connections)

High Quality: HERCOO's park signal front marker lights covers is made of ABS/PC materials (anti-scratch, waterproof), special coating on the lens surface prevents hazing and fading, ensuring proper illumination and operational safety.

【Snowflake Pattern】Clear smoke lenses hide side marker lights in Jeep wheel eyebrows for adding a sense of mystery to your Jeep. Dynamic sequential lighting effects of Jeep wrangler turn signal lights unfold in a captivating snowflake pattern that will make your Jeep completely captivating to pedestrians while driving on the road.

【Strong Penetration】45 SMD LED chips with low power consumption, high efficiency and energy saving provide excellent illumination for side marker lights. When used as turn signals, 3000K amber upgrade lightings has super strong penetration, which can make you safer during driving than others.

【Durable Design】Side marker lights are made of durable ABS plastic housing and sturdy PC lens. Fully sealed design is better waterproof, dustproof, shockproof and windproof, with a service life of more than 50,000 hours in extreme weather and environments.

Exact Fit to: Partslinks #: / GM2520174 / and / OEM #: / 15199560

NSF and DOT Certified (Passed stringent quality and safety standards)

Unit includes lens and housing only. Bulbs are sold separately

Exact fit to OEM#: 26135-3TA0A, 26130-3TA0A and Partslink#: NI2530118 NI2531118

CAPA Certified (Passed stringent quality standards)

Assembly includes bulbs, lens, housing, and socket

Exact fit to OEM#: 55055147, 55055146 and Partslink#: CH2550118 CH2551118

Meets or exceeds DOT & SAE compliance standards

Unit includes lens and housing only – no bulb(s)

Direct replacement - this side marker light assembly matches the fit, function and appearance of the factory assembly on specified years, make and models

Ideal solution - reliable replacement for an assembly that has failed due to moisture infiltration or collision damage

Durable construction - this assembly is made from quality components to ensure reliable performance and a long service life

Compatible with : Wrangler TJ 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 Wrangler tj side markers. NOTE: These are aftermarket products. Pls check the compatiblity first before you buy;

Easy to install: Plug and Play insert to install, Non-polarity sensitive. Just remove the stock housing and insert the new marker lamps plug into your existing wiring harness,

Meets all safety and quality standards, DOT, SAE Approved; ISO 9001:2008 Certification.

Exact fit to OEM#: D3TZ 15A201 A, D3TZ 15A201 A and Partslink#: FO2550101 FO2550101

Meets or exceeds DOT & SAE compliance standards

Unit includes lens and housing only – no bulb(s)

Direct replacement - this side marker light assembly matches the fit, function and appearance of the factory assembly on specified years, make and models

Ideal solution - reliable replacement for an assembly that has failed due to moisture infiltration or collision damage

Durable construction - this assembly is made from quality components to ensure reliable performance and a long service life

APPLICATION - Driver and passenger side marker lights Compatible with Chevy Cruze 2011 2012 2013 2014 2015, 2016 Chevy Cruze Limited. OEM Part Number: 95186926, 95186927. Partslink Number: GM2550198 GM2551198.

UPGRADED DESIGN - BESTVIEW front LED side marker light is powered by 36pcs amber color high power LED chips, form the perfect focal strip with a super bright lighting output. Greatly improve vehicle identification and enhance safety factors at night.

INSTALLATION -Plug and play electrical hook up, easy to replace existing front bumper LED side marker light assembly with no tools required. Canbus LED control unit design, no error code.

4PCS Side Marker Light Retainer

F81Z15A436AA F81Z-15A436-AA

Fitment Type Direct Replacement

Exact fit to OEM#: F37Z 13201 A, F37Z 13200 B and Partslink#: FO2520118

Meets or exceeds DOT & SAE compliance standards

Buy as a pair to ensure perfect matching look