Best Uxcell Mechanical Seals in 2026

EPDM FOAM RUBBER SEAL: Trim-Lok D-Shaped Rubber Seal drowns out noise, eliminates vibration, and protects your vehicle, boat, or home from outside elements.

MANY APPLICATIONS: Durable Trim-Lok Foam Seals can be used for marine, automobile, and home cases – providing hatch, window, and door seals for cars, trucks, RVs, trailers, boats, and more!

WEATHER-RESIST: These rubber D-seals provide excellent resistance to water absorption, ozone, sunlight aging, low temperature, and compression set. General temperature rating of -20°F to +158°F. It is a reliable weatherstrip seal for many applications.

Product Name : Oil Seal;Design : Signle Lip

Model : TC;Material : Polyurethane (PU), Rubber, Steel Spring

Inner Diameter (Approx.) : 30mm / 1.18";Outside Diameter(Approx.) : 47mm / 1.85"

FITMENT: Fit for Ford 2005-2019 F-250 F-350 4X4s having the vacuum-operated front axle. Similar to OTC 6697

HIGH QUALITY: Machined from heavy duty steel with excellent mechanical and physical properties, this seal installer is good in corrosion resistance and durability

APPLICATION: Installing the seal onto the axle shaft and into the wheel knuckle, this tool makes seal replacement much easier

Chemical Resistant

Self Lubricating

High Temperature

World leading dripless mechanical face seal for marine applications.

Ideal replacement for packing glands and lip seals in marine or industrial environments

Highly durable, low maintenance and cost-effective solution.

Fitment: Perfectly fit for Ford 4.5L, 6.0L, 6.4L Powerstroke, F-250, F350, F-450, F-550, F-650, F-750, Low Cab Forward, E-Series, Excursion and VT 365-MaxxForce7

High Quality: Machined from heavy duty steel with excellent mechanical and physical properties, this Installer Tool is good in corrosion resistance and durability

Application: Used for installation and removal of Rear Crankshaft Seal & Wear Ring of Ford, it credibly prevents the seal from leaking

Chemical Resistant

Self Lubricating

Temperature -200 to 540 Degree F

Material: Alloy + Plastic ;Type：301-12,Internal Diameter : 12mm.

Can work in water, oil, and other weakly corrosive media.

Mechanical Shaft Seal Replacement,Product Included：3 X Mechanical Sealing.

FITMENT: 6.7L Power Stroke Rear Crankshaft Seal Remover fits for 2011-2019 Ford Super Duty F-250, F-350, F-450 and F-550, 2016-2019 Ford Super Duty F-650 F-750

SUPERIOR QUALITY: Machined from heavy duty steel with excellent mechanical and physical properties, this Crankshaft Seal Remover is good in corrosion resistance and durability

APPLICATION: 303-1513 tool is needed to remove the rear crankshaft seal and prevent your seal from leaking. You must remove the ignition pulse crankshaft sensor ring before bolting up the removal plate

Arctic Cat 400 2x4 1998 - 2001. Arctic Cat 400 4x4 1998 - 2000. Arctic Cat 400 4x4 w/MT 2001 - 2002. Arctic Cat 400 DVX 2004 - 2008. Arctic Cat 454 2x4 1997 - 1998. Arctic Cat 454 4x4 1996 - 1998. Arctic Cat 500 4x4 w/AT 2000 - 2002. Arctic Cat 500 FIS 4x4 w/AT 2002 - 2009. Arctic Cat 500 FIS 4x4 w/MT 2002 - 2009. Arctic Cat 600 Cross Country Racer 2014. Arctic Cat 600 Sno-Pro Factory Racer 2010 - 2014. Arctic Cat 600 Sno-Pro Racer 2008. Arctic Cat 600 Sno-Pro/CC 2009 - 2013. Arctic Cat 650 4x4 H1 2005 - 2011. Arctic Cat 650 4x4 H1 Mud Pro 2010 - 2011. Arctic Cat 700 AT EFI 2006. Arctic Cat 700 EFI 2007 - 2008. Arctic Cat Bear Cat 550 1995 - 1996. Arctic Cat Bear Cat Wide Track 1996 - 2002. Arctic Cat Bearcat 5000 XT EFI 2015. Arctic Cat Bearcat 7000 XT EFI 2017. Arctic Cat Bearcat Z1 XT EFI 2010 - 2014. Arctic Cat Cheetah 1991 - 1993. Arctic Cat Cheetah 550 1994. Arctic Cat Cheetah Touring 1991 - 1993. Arctic Cat Cougar 1991 - 1994. Arctic Cat Cougar 1995 - 1998. Arctic Cat Cougar 2 Up 1996. Arctic Cat Cougar Deluxe 1998. Arctic Cat Cougar Mountain Cat 1993 - 1994. Arctic Cat Cougar Mountain Cat 1995 - 1998. Arctic Cat Cross Fire 500 EFI 2007 - 2009. Arctic Cat Cross Fire 600 All Models 2006 - 2011. Arctic Cat Cross fire 700 EFI 2006. Arctic Cat Cross fire 700 EFI Sno-Pro 2006. Arctic Cat Cross Fire 800 EFI 2007 - 2011. Arctic Cat Cross Fire 800 EFI Sno-Pro 2008 - 2009. Arctic Cat Cross Fire CFR 8 HO EFI 2010 - 2011. Arctic Cat EXT 1991 - 1993. Arctic Cat EXT 580 1993 - 1996. Arctic Cat EXT 580 EFI 1998. Arctic Cat EXT 580 EFI All Models 1993 - 1997. Arctic Cat EXT 580 EFI Deluxe 1998. Arctic Cat EXT 600 Triple All Models 1997 - 1998. Arctic Cat EXT Mountain Cat 1991 - 1992. Arctic Cat EXT Mountain Cat EFI 1993. Arctic Cat EXT Powder Special 1995 - 1997. Arctic Cat EXT Powder Special EFI 1997. Arctic Cat EXT Special 1991. Arctic Cat EXT Special 1992

100% Brand New Aftermarket Unit

NOT Remanufactured

PSS Shaft Seal bellow maintenance kit for world market leading dripless mechanical face seal.

Includes rubber bellow (1), O-rings (2), set screws (5), thread lock tube (1), hose clamps (4), Allen key (1).

Preventative maintenance recommendation based on replacement standards for rubber products below waterline.

Oil resistance, wear resistance, aging resistance, elasticity

32mmx42mmx6mm Y-shape 65A mechanical seal for piston and piston rods

Working Pressure: Less than 25Mpa; Working Temperature Range: -15°C to 100°C (5°F to 212°F)

[Metric Size] - 47mm Outside Diameter, 30mm Inner Diameter, 7mm Width

[Nitrile Rubber] - Standard 70A NBR with a temperature range from -4℉ (-20°C) to 212℉ (100°C)

[Advantage] - Good resistance to many petroleum oils, greases, hydraulic fluids, mineral oil, and grease

Material: Alloy + Plastic ;Type：104-19,Internal Diameter : 19mm.

Can work in water, oil, and other weakly corrosive media.

Mechanical Shaft Seal Replacement,Product Included：3 X Mechanical Sealing.

Fitment -- Fits for John Deere 1039, 4045, 6059 and 6068 engines, Used on seals RE538097 and DZ111671.

Replacement -- Replaces ST-270 and JDG954B both in function and performance.

Note -- To assure proper sealing, the OD of the crank shaft and wear sleeve MUST BE cleaned and dry prior to installing seal.

Fit for Shaft Diameter:3/8",1/2",5/8",3/4",7/8",1"

Stationary Ring:Carbon

Rotary Ring:Ceramic

[Size] - 12mmx22mmx5mm Y-shape 90A mechanical seal for piston and piston rod

[Operation Range] - Working Speed: Less than 0.5m/s; Working Pressure: Less than 35Mpa; Working Temperature Range: -35°C to 100°C (-31°F to 212°F)

[PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity

Chemical Resistant

Self Lubricating

Temperature -200 to 540 Degree F

Stationary Ring:Ceramic

Rotary Ring:Carbon

Secondary Seal:Nitrile Rubber(NBR)

【Design to Reduce Wear】304 stainless steel + silicon carbide Material Pump Seals, All axial movement has been eliminated, preventing wear on the shaft and rubber parts.

【Balanced Type】The cartridge seal is a balanced type seal, which makes it less insensitive to pressure.

【Easy to Use】Used for balance sealing. Easy to install, easy to replace without disassembling the pump parts.

[Size] - 20mmx28mmx5mm Y-shape 90A mechanical seal for piston and piston rod

[Operation Range] - Working Speed: Less than 0.5m/s; Working Pressure: Less than 35Mpa; Working Temperature Range: -35°C to 100°C (-31°F to 212°F)

[PU Material] - Oil resistance, wear resistance, low-temperature resistance, aging resistance, high hardness, elasticity

The product is made of high-quality materials and is made of the original gearbox, which is reliable and not easy to damage, and the improved design can prolong the service life

Improve transmission flexibility and comfort and provide uninterrupted power output for the transmission, Hard and wear-resistant, professionally manufactured, with high machining precision and durability.

Strict quality control manufacturing standards, excellent mechanical stability and corrosion resistance, easy installation, also provide online technical services

Shaft size:35mm

Compatible with: Flygt pump 2670 3153 5100.210 5100.211 5100.220 and 5100.221

Durable and resistant materials:Wear-resistant tungsten,carbide (WCCR),High temperature resistance

CUSTOM IDENTIFIER: US SEAL PS-359 D656940

HIGH-QUALITY STAINLESS STEEL MATERIAL: 304 stainless steel material, corrosion-resistant and wear-resistant.

SCOPE OF APPLICATION: Widely used in water pumps, online pumps and general industrial pumps.

MECHANICAL SEAL: The mechanical seal is a built-in internal flow single-ended structure.

Can work in water, oil, and other weakly corrosive media

The mechanical shaft seals is high pressure resistance, high temperature resistance, resistance to corrosion, It is durable and has a long service life.

Small size accuracy error, long sealing performance.

Metric dimensions: outer diameter 47mm, inner diameter 25mm, width 7mm

TC-type oil seal: It has double lips with a clamping spring, and uses a rubber cover to improve the sealing ability. The oil seal is used to protect the shaft and bearing from the invasion of dust and foreign matters and the seepage of oil or grease

High-temperature resistance: standard 70A nitrile rubber, high-temperature resistance, anti-static, corrosion resistance, temperature range: -4 degrees Fahrenheit (-20 degrees Celsius) - 212 degrees Fahrenheit (100 degrees Celsius)

Stationary Ring:Ceramic

Rotary Ring:Carbon

Secondary Seal:Nitrile Rubber(NBR)

Stationary Ring:Ceramic

Rotary Ring:Carbon

Secondary Seal:Nitrile Rubber(NBR)

Product Name : Mechanical Seal;Internal Diameter : 12mm / 0.5"

Ceramic Rotary Ring Size : 25 x 12 x 7mm / 1" x 0.47" x 0.28"(OD*Inner Dia*T);Overall Size : 25 x 23mm / 1'' x 0.9" (D*H)

Material : Rubber, Metal, Ceramic;Color : Black, Silver Tone