Best Mechanical Worm Gears in 2026

Set include a 0.5 modulus 5MM Hole Dia brass gear shaft and a 20 T brass worm gear wheel.

The transmission structure of shaft is simple, compact, small volume and light weight.

Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission.

[Specification] Aperture: 14mm; Height: 27mm; Maximum outer diameter: 42mm, module: 2 modules, number of teeth: 20T.

[Quality Material] Made of high quality 45# steel ,high wear-resistance,longtime use. Lower contact ratio between gears, higher load capacity.

[Application] It is widely used in transportation, hardware, agricultural equipment, printing machinery, automobile applications, mechanical transmission, etc.

Set include one 0.5 modulus 5MM Hole Dia brass gear shaft and one 40 T brass gear wheel.

The transmission structure of shaft is simple, compact, small volume and light weight.

Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission.

27 PCS Gear Kits: 2 x 80T gears, 1 x 72T gear, 1 x 65T gear, 2 x 60T gears, 1 x 57T gear, 1 x 55T gear, 1 x 54T gear, 2 x 50T gears, 1 x 48T gear, 2 x 45T gears, 1 x 45T gear, 2 x 40T gears, 1 x 35T gear, 1 x 33T gear, 4 x slotless gear, 1 x motor gear, 2 x variable gears, and 1 x belt gear.

High-quality Material: The metal lathe gears are made of #45 steel that features impressive plasticity and hardness. They can stand up to wear and corrosion.

Precise Gear Teeth: The mini lathe gears have been through a deburring process which left clean and precise gear teeth. With these gears, your lathe can work more efficiently.

Set include one 0.5 modulus 6MM Hole Dia brass gear shaft and one 60 T brass gear wheel.

The transmission structure of shaft is simple, compact, small volume and light weight.

Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission.

1:1 Right Angle Bevel Gearbox for Simple DIY Mechanical Application.

Specification: 1.5 module, 20 teeth, bevel gear with 2 x M4 screw holes, 10mm shaft.

Motor drive can be realized with coupling and belt pulley gear.

Made in USA

Carburized case hardened "Gleason Coniflex" bevel gears, AGMA quality class 9

Compact precision machined aluminum housing coated with a chemical film

Include one 0.5 modulus brass gear shaft and one 50 T brass gear wheel.

The transmission structure of shaft is simple, compact, small volume and light weight.

Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission.

?EXCELLENT WORKMANSHIP?This gear is made of high quality nylon material, durable, not easy to deform, and can be used at ease.

?BETTER CONTROL?This gear can help you control your products better, with fine workmanship and long service life.

?PORTABLE DESIGN?This gear is small in size, light in weight, portable and very convenient.

[Unique Design] - The transmission structure of worm shaft is simple, compact, small volume and light weight.

[Premium Material] - The worm is made of metal and the worm wheel is made of bronze, which has a long service life.

[Worm Wheel] - If you need more torsion or slower output speed, you can use it to replace the standard 4: 1 worm gear for Zhouyu worm gear box.Similarly, the equipment reduces the chance of reverse drive to almost 0.

Gear worm

Made of colored plastic

Available in blue color

Gear worm

Made of colored plastic

Available in red color

Set include one 0.5 modulus 4MM Hole Dia brass gear shaft and one 60 T brass worm gear wheel.

The transmission structure of worm shaft is simple, compact, small volume and light weight.

Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission.

Feature - 100% Brand new and .Good accessories for Vehicle or remote control,Provides a convenient choice for your DIY project

Specification - Plastic Gears Model 182A, 18 Theeth, 0.5 Modulus, 10mm Outer diameter, 5mm Thickness, 2mm Hole Diameter

Application - Plastic Crown Gears suit for a science DIY projects such as rc model car, model electric robot and windmill, education such as displaying how gear rates work, and any other family small motor DIY project.

Made in USA

Carburized case hardened "Gleason Coniflex" bevel gears, AGMA quality class 9

Compact precision machined aluminum housing coated with a chemical film

Made in USA

Carburized case hardened "Gleason Coniflex" bevel gears, AGMA quality class 9

Compact precision machined aluminum housing coated with a chemical film

Size - Modulus: 1.0, Teeth Number: 25, Height: 15.16mm / 0.6inch, Outer Dia: 26.4mm / 1.04inch, Inner Dia: 6mm / 0.24inch, Step Height: 8mm / 0.31inch, Step Dia: 20mm / 0.79inch, Effective Tooth Length: 6mm / 0.24inch

Material - Made of quality plastic, not easy to wear, is durable, and has lasting performance. This gear is an good industrial replacement accessory.

Feature - The contact between the gears is firm, ensuring the machine's normal operation and good bearing capacity.

Rod Shaft made by 45# carbon steel,Worm Gear made by Brass

Rod Shaft from 8-15mm,20Teeth Gear from 8-15mm

Center Distance:For 1:20 set is 27.50mm

Size - Modulus: 1; Gear Teeth: 20; Outer Diameter: 23mm / 0.9"; Inner Diameter:8mm / 0.32"; Direction of Rotation: Right, Reduction rate: 10 : 1.

Material - The worm gear wheel is made of brass material, not easy to wear and tear, durable, and can last for a long time.

Feature - The worm gear wheel is compact, small volume, and light weight, it is easy to install and use, and the transmission process is smooth.

Size - Modulus: 0.5; Outer Diameter: 6.9mm Gear Shaft, 11.4mm Gear Wheel; Inner Diameter: 3mm Gear Shaft, 4mm Gear Wheel; Direction of Rotation: Right, Reduction rate: 20 : 1, Z1=1.

Material - The set is made of brass material, not easy to wear and tear, durable, and can last for a long time.

Feature - The gear wheel shaft set is compact, small volume, and light weight, it is easy to install and use, and the transmission process is smooth.

Size - Modulus: 1.0, Teeth Number: 15, Height: 13.95mm / 0.55inch, Outer Dia: 21.4mm / 0.84inch, Inner Dia: 5mm / 0.2inch, Step Height: 8mm / 0.31inch, Step Dia: 16mm / 0.63inch, Effective Tooth Length: 5mm / 0.2inch

Material - Made of quality plastic, not easy to wear, is durable, and has lasting performance. This gear is an good industrial replacement accessory.

Feature - The contact between the gears is firm, ensuring the machine's normal operation and good bearing capacity.