Best Desk Microphone Stands in 2026

Streamlined Design: internal springs and integrated cable channels.

Fully Adjustable: ball head and swivel base.

Extra Tall: 750 mm / 29.5 in vertical reach to extend over most monitors.

Highly adjustable microphone boom enables horizontal and vertical positioning for optimal microphone placement

48” of maximum arm reach gives users max microphone placement versatility; ideal for podcasting, broadcasting, streaming and voice recording setups

Boom arm offers 5/8”-27 mic clip threading for easy microphone integration

Upgraded Non-Slip Mic Clip: Moukey MMS-2 desktop mic stand is equipped with unique dents anti-slip microphone clip to hold your microphone firmly. The mic stand comes with a special adjustment knob for adjusting the microphone clip angle easily. It’s your ideal choice to meet various needs.

More Stable Weighted Base: Our desk microphone stand is NEWLY UPGRADED with a bigger and weighted base which is 5.51 inches in diameter and weighs 2.33 pounds, addition features 3 rubber pads on the bottom to absorb vibration and provide a precise balance and stability.

Screw-in Style Height Adjustment: Different from other snap-in style stands, our screw-in style desktop mic stand is much more secure and tight, making sure the height stays on without SLIDING down. Support higher adjustment height from 12.6" to 18.5".

3/8" threaded mount, 5/8" adaptor; Height: 3.1"-4.9"/8cm-12.5cm; Non-slip feet; Durable construction

Ideal for Home, stage, and studio, podcasts, meetings, lectures, broadcasts, live interviews, live sound reinforcement for low-profile instruments and equipment

Securely positions your mic for music, podcasts, voiceovers, lectures, or sound reinforcement for kick drums and amps

NOTE - ♥When you first open the complete set microphone, the arm will pop out like waving, so please hold both arms and open it slowly . ♥Strong springs are adjustable and have a greater load bearing capacity (More than 4.4 pounds).♥The diameter of the mic clip can be changed by adjusting O-rings on shock mount, perfect suit for mics with a diameter of more than 4.5cm.♥Microphone in the pictures NOT INCLUDED. ♥Equipped with instruction and adaptor, easy set up and suit for Blue Yeti, Snowball.

STABILITY & SAFETY - Dual suspension springs on each boom arm, protects microphone from shaking, suddenly dropping and making noise. Comes with one table mounting clamp, an adjustable positioning screw, can easily clip to any desktop up to 2.15"/5.5cm thick. With this you can easily mount it on your table without any other accessary. The table mounting has a layer of sponges to maximize protect your desktop. Added with soft mat or rubber washer it can avoid damaging your furniture.

ALL ZINC ALLOY CONSTRUCTION - Compact microphone stand is designed for heavy duty carry, the adjustable scissor arm stand is made of high quality steel frame and electrostatic powder spraying tech, sturdy, antirust and durable. Load:More than 70.67oz/2KG. Arms are lightweight, completely flexible and convenient to carry, firmly attach the microphone anywhere. 

4.4lb Max Load Mic Arm:Luling Arts mic arm with Shock mount is made of 5pcs sturdy steel,is not the old 4pcs thin steel tube in the market.the thickness of its arm tube is improved from 0.39 inches to 0.55 inches,sturdy enough to keep mic well placed, no "dip" or "sink". Freely adjust the boom arm.

Upgraded Microphone Arm Desk Mount :This new microphone arm desk mount contact area from 38 cm² to 47.5 cm²,Easily clip to any desk up to 2.7''/70mm thick.the headset hook is integrated into the desk clamp, added flexible adjustment screw adjust mic body stand prevent pop up.

Mic Stand with Shock Mount :Please noted the shock mount is not fit for Blue Yeti,support hole diameter of 52mm mics. protect the microphone all-around with high rubber rope design which makes the microphone more convenient to install and prevent it from falling. the filter with 2 screen can blocks and dissipates air blasts, reducing its velocity to get good sound.

Fold-able Arm Band: Adjustable microphone arm can be folded up and easy for easy transport. Adjust to your desired angle and height

Anti-scratch desk Mount fits most desk tops. Opens to 38 inches

Include mic clip (Opening 38 inches), Screw adapter 38 inches. Fits Chromacast CC-IM-1 and CC-VM-1 microphones and other popular mics, such as SM57, SM58, Sennheiser E835, Audio Technica ATR-1100 and many more​

THE INNOVATIVE LEADER IN STAND TECHNOLOGY: The round compact microphone base stand allows for maximum durability and stability so you can keep focused on your music. Easily thread your microphone (not incl.) to the stand to be firmly held in place.

CALLING ALL MUSICIANS: This base sets the standard for all table or desk stands and can be found in every music studio or concert stage. Bolt a mic to the 7” high stand - perfect for desktop applications like announcements, paging or piano singing.

TRUSTED DESIGN: A cast-iron weighted base and an anti-vibration rubber inserted ring, reduces the transmission of unwanted sounds and provides a non-slip vibration-free stand. Designed to be your go-to stand and give many years of service!

Product 1: Clamp-On-Desk Headphone Hanger

Product 1: Utilizes Table Edge to Free Up Desktop

Product 1: Stores Headphones Properly

13" Black Finish Flexible Gooseneck for Mic or Light stands.

Male and female threads 5/8 inch - 27 threads.

Mounts to mic or desk stands and podium flange or desk mounts.

♦ H-Q MATERIAL: The inside of this isolation shield is made of absorbent cotton insulation material, which reduces echo and sound reflection during the recording. In addition, this microphone isolation shield can also filter out extra acoustic noise.

♦ ADJUSTABLE, FOLDABLE & PORTABLE: This Mic shield that consists of three panels together has two folding panels and it’s free to adjust the angle and the angle reaches up to 145 °, so it is way convenient for you to take this sound shield with you wherever you go.

♦ DURABLE IN USE: The outside of the reflection filter is composed of premium steel, which is proved to be strong, tough and recycled. Besides, it’s so durable that it requires so little maintenance.

Heavy Duty Construction - This microphone stand is made of durable steel for outstanding bearing capacity(3.53lbs/1.6kg). Dual suspension springs of each boom arm holds the mic right in place with no sagging, drop or jiggle.

Perfect Effect - Suspension boom arm with a great deal of flexibility hold your Razer Seiren X microphone in any position you want. No sag, just rock solid.

Professional Pop Filter - Banish the dreaded hissing and lisping sounds that come when pronouncing the letter "S" and blocks those ugly "plosives" that follows "B" and "P". Swivel mount for easy installation.

COMPATIBILITY: Equipped with a 5/8 inches female threaded screw, it fits for most standard microphone clips or shock mounts; Note: The shock mount is not included

ADJUSTABLE HEIGHT: The height can be adjusted from 4.9 inches/12.5 centimeters to 7.5 inches/19 centimeters by rotating the knob of the center pole when the legs are unfolded

ANTI-SLIP RUBBER FEET: Three legs of the tripod are mounted with panel anti-slip rubber pad which avoids the scratches left on the floor or on your desk and also avoids the annoying scratch noise during the movement

Non-rebound and Safer Design - Compared with the general outside spring microphone boom arm, the spring of this product is built-in, which can effectively reduces the noise and prevent you from being injured by the external spring or rebound arm when adjusting or installing the microphone stand arm.

Heavy Duty Construction Mic Stand - This mic boom arm for blue yeti is made of sturdy metal which can hold your blue yeti microphone firmly, effectively reducing noise and vibration. The microphone boom arm rotates 360 degrees and offers a horizontal reach of 27 inches.

Excellent Microphone Shock Mount - The shock mount is made of lightweight, high-quality aluminum, compatible with Blue Yeti and Blue Yeti Pro USB microphone, which can isolate your mic from noises and vibration. There is a cotton pad between the shock mount and the bottom of your microphone, which can prevent your microphone from being scratched.

【Blue Yeti Snowball Mic Stand with Metal Shock Mount】: Luling Arts microphone arm with shockmount desgined for Blue Yeti, Yeti Pro ,Blue Snowball or mount most standard 1/4'' to 5/8'' adapter microphones.also comes 3/8'' to 5/8''Screw adapter.the mic arm with shock mount Max Support Weight is 70 oz/2 kg (4.4pound).

【BLUE Snowball boom arm with shockmount】This Blue yeti boom arm Improved leg from hollow to solid ,no longer break or shake. more Stability Range of motion and stronger. Will not break the legs,the market will break the legs after 6 months of use.

【BLUE SNOWBALL Yeti Mic Stand with Pop filter】:This adjustable blue snowball yeti microphone stand comes double layer Pop Filter,snowball mic foam cover,double reduce the plosive, wind interference, saliva spraying.free angle and height to show your perfect voice let you pick up any times.

Package comes with boom arm, 6ft XLR cable, and 4 cable organizers. This professional-grade boom stand is designed for podcast and radio streaming, featuring a heavy-duty, adjustable XLR arm for precise microphone placement.

Fully extends to approximately 40" of boom arm reach. Range of motion up to 280º allows you to adjust mic position to exactly where you need it. The low profile design allows for easy integration into any desktop or table setup, while the clamp mount ensures stability and security.

Heavy duty boom arm holds up to 5LB load. Whether you're using a small condenser microphone or a large studio mic, this stand is compatible with a wide range of models thanks to its flexible arms and adjustable suspension.

【Perfect Boom Arm】- Suspension boom arm stand suitablely fit your HyperX SoloCast microphone, you can easily adjust the mic to the suitable angle or height to show your perfect voice.

【Stability】- Mic boom arm is dual suspension springs on each boom arm, protects the SoloCast microphone from shaking, sinking and making noise.

【Mic stand】-The Mic Arm desk mount can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG).

LARGE CAPACITY-Made of sturdy metal, the scissor arm tube is wide and thick enough. Multi-reinforced designs make the weight capacity of arm stand up to 2 kg. The compact and strong boom arm gives your microphone secure hold to reduce violent shaking from intense gaming operation or bump and hit.

FLEXIBLE ADJUSTMENT-Every joint on the arm stand provides a wide angle adjustment range. You can stretch it vertically for 180° or horizontally for 135°. Sufficient flexibility and extension allow you to adjust recording posture at will for a better angle to produces more touching and resonant audio.

SPACE SAVING-The foldable mic boom arm is greatly convenient. It is handy and easy for you to put it aside the desktop corner after recording or other using. The suspension mic stand saves more desk space, leaving more places for your snacks, PC setup or computer accessories placing.

With heavy black iron base to increase stability, but does not produce noise when moving.

Made of metal, to make it stronger and for robust support. Suitable for any desk with situations such as conference room, church and other places.

With the plastic microphone clip and the 5/8" connector to 3/8" connector it is perfectly compatible with most microphones you have, such as Blue Yeti Snowball Spark and other microphones.

DONNER Boom Arm - Donner MS-1 Pro Desk Microphone Boom Arm, all-tube-style design with internal springs and desk C-clamp. 360° rotatable design will give you a well-placed position and angle experience.

Heavy Duty Mic Arm - The microphone boom arm is made of premium metal that is designed to last years. This boom mic stand can reach up to 33 inches vertically and 32.5 inches horizontally. Come with 3/8'' to 5/8’’ adaptors that can attach most shock mounts and pro microphones, like BLUE YETI, SHURE, RODE, AT2020, etc. 【WEIGHT CAPACITY: 0.5-1.5kg (including the microphone and shock mount)】

All-Tube Internal-Spring Design - Hidden Cable Management System by Donner mic arm specially designed for your live streaming and video productions to save your desktop the mess of tangled cables and free up a lot of space. The simple and stylish appearance helps you to enjoy creation professionally.

Adjustable Mic Stand : Suspension boom arm stand fit your Blue Snowball suitable, streaming, podcasting and Skype calls,Record vocals, create podcasts, home movies.you can easily adjust the mic to show your perfect voice.

Super Windscreen: Foam pop filter designed for Blue Snowball iCE with high quality acoustic foam material, filter the unwanted background noise to improve your sound quality.

Stability: Mic boom arm is dual suspension springs on each boom arm, protects the microphone from shaking, sinking and making noise.

✓【Adjustable Boom Arm】The newly upgraded built-in spring design and intelligent balance system that provides increased load bearing and stability while being flexibly adjustable, so it can provide effortless and silent microphone positioning which is vital in live recording situations. Maximum load-bearing in tilted state: 1.36kg/3lbs, maximum load-bearing in vertical state: 1.8kg/4lbs. Note: Watch the installation video and product description before use.

✓【Free Position Mic Arm】The maximum vertical distance of this desktop mic stand can reach 71cm/23.3in and the same horizontal distance. Aveek boom arm offers 200-degree arm adjustment, 360-degree rotation and 270-degrees metal adapter adjustment. It allows you to freely position microphones within adjustable range and will not bounce up.

✓【Neat Aveek Microphone Stand】With 4 cable ties to tie the cable to the boom, keeps your space clear of tangled wires. The C-clip has built-in silicone pads that won't scratch your deskto, and the enlarged base has a larger contact area with the tabletop, which is more stable. The height of the c-clip is 2.7in/6.86cm suitable for tables of various thicknesses, and the bottom is a hook design that can store headphones, data cables, shock mounts, etc.

【Upgraded heavy-duty base】Increase the contact area between the heavy base and the desktop, and add non-slip pads to make the base support more stable and firm.

【"L" shaped hook】Different from the traditional base, the NB35-B heavy-duty base adds an "L"-shaped hook at the bottom to provide convenience for items that need to be hung, such as earphones.

【Screw-in installation design】Use adjustable positioning screws to firmly install your microphone stand on a desktop or other flat surface. Tighten the knob to suit various desktop thicknesses, and the maximum support is 2.75"/70mm thick desktop.

【Adjustable Microphone Boom Arm】 Conveniently adjust the angle and height of this mic boom arm to suit your vocal recording needs. Simply loosen the adjustment knob and adjust the boom arm. It's also easy to fold up and carry. Perfect for stage/studio recording, broadcasting, TV stations, and more

【Stable Arm Support】 With the strong springs and metal positioning screws, the boom arm is compact yet stable enough to support a load of up to 3.3lb/1.5kg. Designed so that the springs don't get in the way of tightening the adjustment knob

【Upgraded Desk Mount Clamp】This upgraded desk clamp has a 40.7 square centimeters contact area that is 8 times larger than that of a traditional microphone stand desk C clamp. Easily attach it to any desk up to 2.75"/7cm in thickness.

【Perfect Effect】- Suspension boom arm hold your Razer Mini Seiren USB Streaming microphone in any position you want. No sag, just rock solid.

【Professional Pop Filter】- Foam windscreen cover compatible with Razer Mini Seiren microphones，Pop Filter improves the recording quality by drastically filter out all unwanted background noises.

【Razer Seiren Mini Mic Arm】- Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89"/4.8cm thick. The stand arm can be extended up to 26.8"/68cm.

Strong Compatibility :NOTE:You need to screw the corresponding two nuts in the bracket set to the bracket before you can install your blue microphone on the bracket.Microphone boom arm adapter wide compatibility3/8'' to 1/4'' connector and 3/8'' to 5/8'' Screw adapter are line with industry standards.This stand not only compatible with blue yeti, but also suitable for blue series or mount most standard-sized microphones.

Easy to use:This blue yeti boom arm is simple to set up and demount, you can easily move and carry the microphone stand.Compatible with blue series microphone,Suitable for voice-over, Video recording, broadcasting, TV stations for you additional convenience.

Heavy Duty Steel Structure: Super-strong spring with extra positioning screw, compact microphone arm stand designed for blue yeti carry,sturdy enough to keep mic well placed. Max load: Approx.2.2pound/1.1kg.

🎵【Excellent 2-in-1 Tabletop Mic Stand】The KDD microphone desk stand features a novel square base design that can accommodate your cell phone phone as a text prompter at the same time. The well-made weighted base, 6.49 inches in diameter, has an offset center of gravity for improved weight-bearing capacity and can support heavy microphones without tipping over. Four non-slip pads on the bottom of the mic holder protect your desk from scratches.

🎵【Professional Multifunctional Configuration】Multifunctional mic stand desk with POP Filters, shock mount, universal microphone clip, 5/8 conversion nut and 5 cable ties. The professional microphone stand kit is compatible with Blue Yeti Snowball and can be used with Audio-Technica AT2020 AT2020USB+ AT2035 ATR2500 ATR2100-USB, Samson q2u, Shure sm58, sm48 and other microphones.

🎵【Flexible Height Adjustment】The height of this retractable microphone stand can be adjusted from 11.5-15.3 inches, allowing you to easily position the microphone at a height that suits your needs. The desktop mic stand's shock mount and universal mic clip are both adjustable at 180° .

Three-section upgrade arm, easy to change angle, more flexible. And the mic boom arm top can be rotated 360°, so you can keep the pickup direction is always facing the sounding place

The built-in spring balance system--More beautiful, will not fall off, through the knob, the load can be adjusted（Recommended load 1.5kg, Max 2kg）. And Cabling groove design, come with 5 Cable buckle, the mic cable can be fixed on the stand body groove for a tidy look

All made of aluminum alloy--The arms and knobs are all made of aluminum alloy, with high hardness and durability, Improve your high-quality experience. Universal desktop clamp maximize your workspace, 1.97 inch clip distance, compatible with most desk

Flexible: Can be angled 360° to accommodate any position for the microphone

Strong: 1/2" x 13" gooseneck ensures your microphone will stay firmly in place

Variable Fit: 1" plastic microphone holder stretches to fit a large range of handheld microphones

Desktop C-clamp Stand Top with 1/4'' thread, come with ball head and a 1/4 hot shoe interface adapter (Removable). And asy to install microphone, Led video light, monitor to DSLR, camcorder or digital camera, Flash Remote Trigger or adapt anything via the 1/4" screw on the top of the mount.

【Adjustablement with Locking Knob】Adjustable Desktop C-clamp Stand: The size height could be extended from 16.7-40.1 Inch as you like. The ball head can ensure 360 degree horizontal rotating and from -90 degree to 90 degree tilting for panoramic photography when adjusting the angle. You can use the knob to adjust to the desired angle to meet your needs at different angles.

Made of highly-durable aluminum-alloy material with stainless steel, using a more stable structure. the hot shoe and c clamp clip with rubber-padded mount on the top to protect your equipment or table from potential scratches between your camera and the mounting part.