Best Sff 8087 Male Mini Sas Cables in 2026

This is Reversed Cable, 4x7Pin Sata is host, connect to the motherboard or RAID Controller with SATA ports. Mini SAS 36 (SFF-8087) is the target, connect to the Backplane with MINI-SAS port

Before you buy this cable, please make sure the Mini SAS 36 (SFF-8087) on your backplane. If the Mini SAS 36 (SFF-8087) on your motherboard or RAID Controller, this cable will not work with them

Mini SAS 36 (SFF-8087) connect to the Backplane, 4 x SATA connect to 4 Controller

Internal mini Serial Attached SCSI SFF-8643 to (4) SFF-8482 Serial Attached SCSI fan-out cable, with one quad-channel SFF-8643 on one end, and four single-channel SFF-8482 on the other.

Compliant with SAS 3.0, supports up to four SAS/SATA hard drives, provides point data transfer speeds up to 12 Gbit/s.

SFF-8643 Connector: Internal HD Mini SAS connector on the host for connecting motherboard or RAID Controller. (Note: Before you buy this cable , please make sure the Mini SAS (SFF-8643) on your motherboard or RAID Controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.)

Internal SAS SFF-8087 to 4x SATA Cable, Straight to Right Angle, 0.25-meter(0.8ft).

AWG30 Twinaxial 8-pair high-bandwidth low-skew wire.

Impedance = 100 Ohms.

[ High Speed Data Transfer] OIKWAN Mini SAS 36 Pin cable is a high-speed data storage interface designed for high-throughput and fast data access. This patch cord supports data transmission of 4 channels of 12 Gbps

[ SFF-8087 Port ]This SFF-8087 interface is mainly used on the mini SAS 4i array card as an internal SAS cable. mass storage interconnection between a SAS controller and a SAS/SATA drive enclosure in a server or workstation.

[ 90 Degree Design] Right Angle design can make for better cable management in some situations, especially in tight spaces.

Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access

Intended primarily for data storage centers the SAS interface is backwards compatible with SATA

This 1 meter long cable uses 28 AWG wires and is intended for external use

Mini SAS 36 (SFF-8087) Male Connect to the Host/Controller, 4x SAS 29 connect to the Target/Devices.

4x SAS 29 female with extra 4 pole power. Multiple lanes support current speed of up to 6.0 Gbps through a single cable.

Point-to-point SCSI makes setting up SCSI easier than ever.

Internal Mini SAS SFF-8087 to Mini SAS SFF-8087 (36Pin) Cable, 0.5meter(1.6ft), 2 Pack.

High Speed and Stable: Mini SAS SFF-8087 Cable Support 6Gb/s High Speed Transmission, Fully compliant to the latest Mini SAS 2.1 interface specifications, Impedance = 100 Ohms, Low Skew Cable.

Durable and Compact Design: Industrial Mesh harness and Stainless Steel latches at both ends ensure a Solid connection, easy to route in tight spaces. Ideal component of a professional SAN network.

[High Density SAS' connector] This premium quality Mini SAS HD SFF-8088 and QSSFP(SFF-8436) connector utilizes a metal outer shell compatible with shielded external connections, to provide for 10Gbps connectivity external to the server between the SAS/HBA controller and external SAS hard drive.

[Fully 6G/10G compliant ]This SFF-8088 connector is compliant with SAS 2.1, and the QSFP(SFF-8436) is compliant with the latest QSFP MSA and SAS3.0. The transmission data rate is up to 10Gbps.

[Better Cable Management & Metal Dustproof design] Convenient pull tabs of this MiniSAS HD cable make it easier to disconnect cable in crowded racks. And the Protective caps over die-cast zinc housings shield ends from dust and damage.

Host/Controller Connection: 1 x 36 pin Mini-SAS SFF-8087 – male with latch

SATA Drive Connections: 4 x 7 pin SATA receptacle – female with latch

Data Rate: 6Gbps per channel

Mini sas 36 sff-8087 to sff-8482 sas forward breakout, internal mini sas 36 pin sff-8087 sas connector male connect to sas raid controller or motherboard, SAS 29Pin 4 sff-8482 connectors with sata power connect to hard driver or 4 hdd, each 29Pin sff8482 adapter contain sata 7 pin data and sata 15 pin power adapter, Note: sff-8087 to 4 sff-8482 cable do Not work with SAS Driver, Donot connecter SFF-8087 on your backplane, otherwise the mini sas to sas breakout will not work with them

Mini sas to 4 sas/ sff-8087 host to sff-8482 target, sas 8087 host connect to sas hba or pcie controller, mini sas 36 sff-8087 to 4 sff-8482 connectors with sata power link between the serial SCSI controller and the SATA disks

8087 breakout cable with power, 8087 male sas connector for expand storage use, sas to sas cable are labled, simple up your cable management game, mini sas sff-8087 sff-8482 data transfer cable easy link serial scsi controller and the sas/sata connector

Internal Mini SAS data cable Total length: 0.5M/1.6ft

Mini SAS 36Pin SFF-8087 to 4 SATA 7Pin Cable: Male Connect to the Controller, 4x SATA Connect to the backplane. Male is Host, 4 x SATA female is target SFF-8087 connect to the Controller, 4 Sata connect to 4 HDD.

AWG30 Twinaxial 8-pair high-bandwidth low-skew wire, Impedance--100 Ohms, Up to 6Gbps data rates per channel

Connectors: SFF-8087 Male (internal Mini SAS, 36-pin ) to SFF-8087 Male (internal Mini SAS, 36-pin )

Cable Lenght : 2 Feet / 0.6 Meter

Conductors / Drain Wire : Solid Tinned Copper, 30 AWG

SFF 8087 to 4 sata breakout cable, sas cable to sata, host side internal mini sas 36 pin male connect to motherboard or sas raid controller, SATA breakout cable connect to backplane or 4 HDD, sas to sata adapter provide secure internal connection between sas raid controller to sas driver cable, NOTE: Do not connect Mini sas connector SFF 8087 on your backplane, otherwise the mini sas to sata cable will not work with them

Mini-sas to sata, sff-8087 port for connection to sas hba or pcie controller, mini sas 8087 sata with locking latch, internal mini sas to 4 x sata cable providing a reliable internal link between the serial mini sas controller to sata target, sff-8087 sas breakout cable data transfer rate up to 6Gbs per drive

SFF8087 forward breakout cable, 8087 male sas connector for expand storage use, sas to sata cable are labled, simple up your cable management game, mini sas to sata female 7pin data transfer cable easy link serial scsi controller and sata connector

SFF-8643 to sata sas cable to sata, sas host to 4 sata target cable, host side internal hd mini sas male connect to sasraid controller or motherboard, sata breakout cable connect to backplane or 4 HDD, SAS to SATA adapter 8643 provide secure internal connection between sas raid controller to sata driver cable, NOTE: Do not connecter Mini sas hd sff 8643 on your backplane, otherwise the sff-8643 to sata cable will not work with them

Mini-sas to sata, sas connector sff 8643 port connect to 12 gbps sas hba or raid controller, mini sas sff-8643 sata with locking latch, hd sas sff-8643 to 4 sata cable providing a reliable internal link between a high density mini sas controller to sata target, SFF-8643 to 4x sata cable data transfer rate up to 6Gbs per drive

SAS fan out cable/ sff-8643 to sata forward breakout, 8643 sas connector for expand storage use, mini sas hd breakout are labled, simple up your cable management game, hd mini sas to sata female 7pin data transfer cable easy link serial SCSI controller and the SATA connector

External Mini SAS 26Pin (SFF-8088) Male to Mini SAS 36Pin (SFF-8087) Male 3.3feet

It has an external 26-pin SFF-8088 male Mini-SAS plug (with release ring) on one end and an internal 36-pin SFF-8087 male SAS plug (with locking latch) on the other.

Allows the user to mix more expensive, lower-capacity SAS drives for applications that require faster data access and higher reliability, with lower-cost, higher-capacity SATA drives for applications with lower access speed requirements. Vision carries a full line of quality SAS cables with connectors for every possible application, both internal and external.

External Mini SAS 26Pin (SFF-8088) Male to Mini SAS 36Pin (SFF-8087) Male 3.3feet

It has an external 26-pin SFF-8088 male Mini-SAS plug (with release ring) on one end and an internal 36-pin SFF-8087 male SAS plug (with locking latch) on the other.

Allows the user to mix more expensive, lower-capacity SAS drives for applications that require faster data access and higher reliability, with lower-cost, higher-capacity SATA drives for applications with lower access speed requirements. Vision carries a full line of quality SAS cables with connectors for every possible application, both internal and external.

Mini SAS 36 (SFF-8087) Male Connect to the Host/Controller, 4x SAS 29 connect to the Target/Devices.

Internal Mini SAS 4i SFF-8087 36 Pin to SAS 4X SFF-8482 29Pin Hard Disk SAS Cable with extra 4 pole power. Multiple lanes support current speed of up to 6.0 Gbps through a single cable.Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access.

SinLoon Mini SAS 36 SFF-8087 to SFF-8482 Connectors cable allow you to connect from a SAS controller with SFF-8087 internal miniSAS connector to four (4) SAS hard drives.

Mini SAS 36 (SFF-8087) Male is host, 4x SATA female is target

Mini SAS 36pin SFF-8087 Male connect to the controller, 4x7pin SATA connect to the backplane.

Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access.

Length : 60CM / 23ft

HOST Port : Mini SAS 36Pin (SFF-8087) Male

Target Port : 4 SATA 7Pin female

Mini SAS to SAS cable used to connect as a controller with a mini SAS 36pin connector (SFF 8087) to a 4 SAS hard disk (SFF 8482). Transmission rate up to 6 Gbps/s

Connector 1: SFF-8087 male. Connector 2: 4x SAS 29 pin(SFF 8482) & 15 pin SATA power port (Note: please confirm your device is SFF-8087 & SFF-8482 port before purchase to prevent ordering errors)

SFF-8087 port is mainly used to connect SATA disks on MINI SAS HD 4i array cards. The conversion cable supports 6Gbps, four channels of data transmission

Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and Fast data access

Intended primarily for data storage centers the SAS interface is backwards compatible with SATA

This 1 meter long cable uses 28 AWG wires and is intended for external use

Mini SAS 36 (SFF-8087) Male Connect to the Controller, 4x SAS 29 connect to the devices.

Mini SAS 36 (SFF-8087) Male is Host, 4 x SAS is target.

Mini SAS 36 (SFF-8087) connect to the Controller, 4 SAS connect to 4 HDD.

⚡Mini SAS 36 (SFF-8087) Male Connect to the Controller, 4x SATA Connect to the backplane.

⚡Mini SAS 36 (SFF-8087) connect to the Controller, 4 Sata connect to 4 HDD.

⚡Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access

Multilane Mini Serial Attached SCSI (SAS) SFF-8087 36 Pin to SFF-8087 data cable is for mass storage interconnection between a SAS controller and a SAS/SATA drive enclosure in a workstation or server,and directly connects a RAID or PCI Express controller to the SAS backplane of a hard drive bay in the server or workstation.

6Gbps High Speed Data Transfer: The SFF-8087 male cord is compliant with the latest 6Gb/s Mini SAS 2.0, and supports 6Gb/s data transfer protocol with compatible SAS or SATA storage systems and hot-swappable SATA/SAS drive bays.

Robust design of HBA Host to Target cable includes an industrial grade woven mesh sheath over the individually shielded ribbon cables, cloth tape strain relief to protect the cables without rigidity, and sturdy 36 pin SFF-8087 connectors with stainless steel latches to ensure a solid connection.

Internal SAS SFF-8087 to 4x SATA Cable, 1-meter(3.3ft)

Up to 6Gbps data rates per channel

This Mini SAS to SATA cable provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector, allowing you to connect four SATA drives to an SAS controller. This is a Forward Breakout cable, meaning that it is intended to connect to a host/controller on the SAS end and to drives on the SATA end.

(1) 36-Pin SFF-8087 Male (90 Degree) Right-Angle Mini-SAS Plug

(4) 7-pin SATA Female Connectors

Connect four SATA drives to an SAS controller

* Connect the Mini SAS controller to drive or backplane.

* The SFF-8088 Mini-SAS 26P TO 4 cable allows you to connect SAS 26PIN devices such as workstations, servers, external storage arrays, SAS expanders, host adapters (HBA's) and controllers 4x , supporting up to 4 ports (4 channels) SAS data and provides reliable, high performance drive and backplane connectivity.

* Support 6Gb / s data transfer protocol.

Delivery From 15 to 20 Day

Compliant with Mini SAS 1.0 specification.

Compliant with SATA II specification.

Connectors: SFF-8087 Male (internal Mini SAS, 36-pin ) to SFF-8087 Male (internal Mini SAS, 36-pin )

Cable Lenght : 2 Feet / 0.6 Meter

Conductors / Drain Wire : Solid Tinned Copper, 30 AWG

* The SFF-8088 Mini-SAS 26P TO 4 cable allows you to connect SAS 26PIN devices such as workstations, servers, external storage arrays, SAS expanders, host adapters (HBA's) and controllers 4x , supporting up to 4 ports (4 channels) SAS data and provides reliable, high performance drive and backplane connectivity.

* Support 6Gb / s data transfer protocol.

* Connect the Mini SAS controller to drive or backplane.