Best Motorcycle Wheels in 2025

Solid front cross bar and boot provide maximum stability.Fit Type: Universal Fit

Durable steel and textured semi-gloss black powder-coat provide heavy duty strength and good looks

Multiple rear wheel cradle adjustments fit wheels perfectly

The Motorcycle Wheel Chock Stand has all the same capabilities except it is designed for trailer use only. The chock will hold your motorcycle so securely, only one person is needed to load and unload any bike, and only two tie-down straps are required.

Motorcycle Wheel Chock Stand's dimensions in the upright position are 9” wide, 25” long and 15” high. Once folded, it becomes 9” wide, 25” long and 7” high.

The adjustable cradle fits all bikes from dirt bikes and sportbikes, to cruisers and heavy touring bikes, and anything in between, up to 3,000 lbs.

LOAD AND TRANSPORT YOUR BIKE: The ABN | Motorcycle Wheel Chocks Front Motorcycle Stand Wheel Chock 1-Pack is standard-sized to hold the front wheel of any street bike; Motorcycle wheel chocks for trailer floor fits standard front wheels (motorcycles with super-wide front tires or custom low-profile front fenders may not fit this wheel chock); Ideal for one-person motorcycle loading

EASY TO USE: Designed with one-person loading in mind; Simply drive or push your bike into the motorcycle front stand to secure your bike in the upright position (use with straps to tie down and support – not included); Takes only minutes to install and seconds to load and unload

MOUNT ON FLAT SURFACE: Mount on wood or metal floor – Mounting plate is held off the floor by the included spacers while the bolt that holds the top to the frame goes in from top with nut and lock washer on the bottom under the mounting plate; Removable by unbolting from your application surface (not quick attachment) – Mounting points allow the motorcycle wheel stand to be removed; 24.5” x 10” x 13” inch (62.2cm x 25.4cm x 33cm) overall and 10-inch (25.4cm) motorcycle front wheel chock length

3-position adjustable holes on wheel base to accomodate various motorcycle wheels

Includes hardware and mounts securely to floor, truck or trailer

Locks your tire as you roll it into your wheel chock; Easy for one person to strap-down a motorcycle

-SUPERIOR CONSTRUCTION & HIGH STRENGTH DESIGN: Made of high quality solid steel, with Powder coated surface finish, which is anti-corrosion and impact-resistance, ensuring a long-lasting usage for outdoor performance. The strong structure can hold up to 1800 pounds, ensuring it can be used on heavy motorcycles without crack or damage.

-ADJUSTABLE LENGTH & WHEEL LOCK: The wheel chock are equipped with 14 cradle adjustments, which can be widely applied for wheels or wide tire which is 15" - 22" diameter / 76 - 130mm, utilized for garage storage, routine maintenance, or bolted directly to a surface for transportation purposes.

-CONVENIENT STRAPPING & FREE-STANDING DESIGN: The two Eye Loops are designed for safe and convenient travel, make sure you motorcycle avoid shaking and wiggle even on rough roads during transportation. Free-standing design can be mounted to floor, truck or trailer bed. The adjustable feet can be fixed on uneven ground.

Product Type: Auto Accessory

Package Quantity; 1

Package Dimensions: 22.0 cms (L) x 22.0 cms (W) x 31.8 cms (H)

Heavy-duty wheel chock for motorcycle tires up to 5.5" wide

Permanently fixed mounting brackets and tee nuts allow easy, tool-free removal of the wheel chock when not needed

Height: 9", Interior Width: 5.75", Total Length: 12"

One-size-fits-all design

Quick disconnect mounting plate

Built-in front tire tie-down system

5-3/4 inch inside width is perfect to accommodate the storage of mopeds, dirt bikes and most motorcycles

Clean chrome-plated finish

Quick and easy installation to your truck bed or trailer floor with included hardware

Features three unique size configurations

Fits nearly all standard motorcycle tire sizes

Self-locking chock holds the tire tightly, keeping your bike standing

Includes (1)BK100 Deluxe Wheel Chock, (2) BK202 Retractable Ratchet Straps, (2) Quick-Release D-Rings, (2) Quick-Release Strap Clips, (1) Mounting Plate, and (1) Front-Tire Ratchet Strap

Economical wheel chock for motorcycle tires up to 5.5" wide

Mounts to a motorcycle trailer, truck bed or garage floor

Four-hole mounting pattern

Economical wheel chock for motorcycle tires up to 5" wide

Mounts to a motorcycle trailer or truck bed

Height: 13.5", Interior Width 5.25", Total Length: 14"

This textured black powder coated motorcycle wheel chock is engineered and designed to stabilize the front wheel of a motorcycle during transportation.

This 24" model has a recessed dimension of 7-1/4" wide by 20" long by 2" deep, and is designed to fit into trailers with floor beams on 24" centers.

INSTALLATION creates a flush surface, leaving the trailer floor free from obstruction when not in use. Comes complete with all necessary hardware for a simple installation. (see more product details below for installation tips).

Stabilizes motocross, off-road MX, and dirt bikes during travel in a pickup truck or on a trailer bed

Enables quick chock removal between uses, includes all necessary hardware for installation

5.5" Wide low-profile wheel attachment

Heavy-duty Steel Frame: Suitable for 17"-21" wheels. High-quality steel pipes weld the motorcycle chock fork bracket, which is firm and robust. The surface is treated with black lacquer, wear-resistant and durable, not easy to rust. Load Capacity: 1200 lbs / 544 kg.

Outstanding Stability: Compared with circular tubes, our motorcycle chock stand adopts square tubes to increase the contact area with the ground, supplying better stability. Four rubber pads are beneficial to shock absorption and slide prevention.

Adjustable Holes Design: The uniqueness of this motorcycle trailer stand lies in the hole adjustment that you can experience. With the holes on the base, you may fix the frame to the ground. No more worries about being stolen at all.

Strong Hold: Stabilize your bike as you travel or haul with this dirt bike wheel chock for trailer made from heavy-duty tubular steel

Easily Removable: Need your trailer for other purposes? This motorcycle wheel chock is removable to let you move the chocks out and use the bike’s space

Design and Quality: The sleekest bike grab wheel chock you’ll find, with a thick chrome coating that also prevents corrosion

1.Fitment: 12 inches to 21 inches Wheel

2.Three levels adjustable

3.Tire width up to 130 mm

3-position adjustable holes on wheel base to accomodate various motorcycle wheels

Includes hardware and mounts securely to floor, truck or trailer

Locks your tire as you roll it into your wheel chock; Easy for one person to strap-down a motorcycle

Heavy-duty Steel Frame: High-quality steel pipes weld the motorcycle chock fork bracket, which is firm and robust. The surface is treated with black lacquer, wear-resistant and durable, not easy to rust.

Powerful Load Capacity: Our motorcycle chock stand adopts solid tubes to increase load capacity up to 3000 lbs / 1360 kg, supplying better stability. With the holes on the base, you may fix the frame to the ground. No more worries about being stolen at all.

Adjustable Holes Design: The uniqueness of this motorcycle trailer stand lies in the hole adjustment that you can experience. Fully adjustable wheel locking chock is capable of accommodating wheels in size from 14" - 22" diameter wheels.

✅【FEATURE】: This Item is Designed To Hold Your Bike Upright, To Change The Oil, Transport. Or Make More Room In Your Garage.

✅【STURDY CONSTRUCTION】: Made of high quality solid steel, with Powder coated surface finish, which is impact-resistance, ensuring a long-lasting usage for outdoor performance. The strong structure can hold up to 1800 pounds, ensuring it can be used on heavy motorcycles without crack or damage.

✅【ADJUSTABLE LENGTH】: The motorcycle wheel chocks for trailer are equipped with 7 cradle adjustments, which can be widely applied for wheels or wide tire which is 15" - 22" (76-133mm W) diameter , utilized for garage storage, routine maintenance, or bolted directly to a surface for transportation purposes.

The plated steel construction of this solid motorcycle stand allows it to accommodate up to 1800 lb. while your bike stands in an upright position.

The adjustable wheel lock fits front or rear motorcycle wheel sizes from 15 in. to 22 in. (80-127W). and a powder coat protects the stand from rust and corrosion.

Tilting wheel adapter automatically secures motorcycle.

【Heavy Duty Steel Stand】 for 17"-21" wheels. Made from high quality heavy duty steel with a powder coated finish, this motorbike wheel chock is impact resistant and ensures long lasting outdoor performance. Load capacity: 1200 lbs / 544 kg.

【Adjustable Hole Design】 The unique feature of this motorbike wheel chock for trailers is the hole adjustment you can experience. There are three setting positions depending on the size of the front wheel. By the way, through the holes in the base, you can fix the frame to the ground so that it is very secure and the motorbike wheel chock will not be stolen.

【More stable】Our motorbike chocks are made of square tubes. Compared to round tubes, the square tubes used in our motorcycle chocks increase the contact area with the ground and provide better stability. The motorbike chock has four rubber pads which are good for shock absorption and anti-slip.