Best Ruby Kisses Motors in 2026

Fan blade not included. Alternate part numbers include AP3120994, 61002038, WP61002038, 12001314, 14210089, 14251476, 14273186, 21012-1, 27515-1, 2790, 28056-12, 28056-14, 28056-16, 28056-3, 28056-5, 28056-7, 28056-9, 311168, 46000833697, 52186-9, 54503-2, 56804, 61001016, 61001562, 67560-10, 67560-3, 67560-5, 67560-8, 68445-3, 68445-7,

68481-2, 68481-4, 833697VP, 99989708, A0287801, AH395284, B0540006, B0547205, B0552001, B0552604, B5603504, B5646301, C7584001, C8766901, C8891701, D7584002, EA395284, PS395284, R0150002, R0950211, SM5109, Y0054175, Y0056804, Y0312499, and Y61001016.

Rotation: Clockwise | Watts: 2W | Voltage: 120V | Amps: 0.28A | Hertz: 50/60Hz | RPM:1550 | Shaft Diameter: 1/4 Inch threaded | Threaded Shaft Length: 1/2 Inch | The condenser fan motor draws air though the condenser coils and over the compressor to cool the refrigerator

Make sure to match up your H/P needed otherwise installing a lower H/P motor will cause it to overheat and not work properly.

HVAC replacement motors manufactured under strict quality standards at one of the world's largest and most modern motor production facilities. Every motor undergoes a variety of stringent tests before it leaves the assembly line.

Application: Condenser | Bearing type: Sleeve | Drive type: Direct drive | FLA at 208V (A): 1.40 | FLA at 230V (A): 1.40 | Frame size: 48 | Frequency (Hz): 60 | High speed (RPM): 1075 | HP: 1/4 | Input voltage (V): 208/230 | Keyed/Flat shaft length (inch): 4 | Motor body diameter (inch): 5-5/8 | Motor body length (inch): 4-5/16 | Mounting: Shell-band, shell-screw, thru-bolt | Number of phases: 1 | Number of speeds: 1 | Overall motor length (inch): 9-5/16 | Overall shaft Length (inch): 5 | Rotation direction (OSE): Reversible | Run capacitor (uF/V): 10/370 | Shaft diameter (inch): 1/2

Make sure to match up your H/P needed otherwise installing a lower H/P motor will cause it to overheat and not work properly.

HVAC replacement motors manufactured under strict quality standards at one of the world's largest and most modern motor production facilities. Every motor undergoes a variety of stringent tests before it leaves the assembly line.

Application: Blower | Bearing type: Sleeve | Drive type: Direct drive | FLA at 208V (A): 2.20 | FLA at 230V (A): 2.20 | Frame size: 48 | Frequency (Hz): 60 | High speed (RPM): 1075 | HP: 1/3 | Input voltage (V): 208/230

Please see Model Number fitment information at the bottom of this page before placing your order for this part. Alternate part numbers include AP3958808, 1196443, 7241509402, AH1526073, EA1526073, and PS1526073.

12 Volts DC | 220mA | 1-3/4 Inch shaft | CW

It is important to disconnect your appliance from the power supply before servicing.

Make sure to match up your H/P needed otherwise installing a lower H/P motor will cause it to overheat and not work properly. HVAC replacement motors are manufactured under strict quality standards at one of the world's largest and most modern motor production facilities. Every motor undergoes a variety of stringent tests before it leaves the assembly line. Motor speed tap lead color Black - High | Motor speed tap lead color Blue - Medium | Motor speed tap lead color Red - Low

Fits models 8905, 10590, WG840590, FD1076, and 43590 | Application: Blower | Bearing type: Sleeve | Drive type: Direct drive | FLA at 208V (A): 4.00 | FLA at 230V (A): 4.00 | Frame size: 48 | Frequency (Hz): 60 | High speed (RPM): 1075 | HP: 3/4 | Input voltage (V): 208/230

Keyed/Flat shaft length (inch): 4 | Motor body diameter (inch): 5-5/8 | Motor body length (inch): 6-5/8 | Mounting: Shell-band, thru-bolt | Number of phases: 1 | Number of speeds: 3 (1075/950/850 ) | Overall motor length (inch): 11-5/8 | Overall shaft length (inch): 5 | Rotation direction (OSE): Reversible | Run capacitor (uF/V): 15/370 | Shaft diameter (inch): 1/2

Please see Model Number fitment information at the bottom of this page before placing your order for this part. Alternate part numbers include AP3110893, 1001, 1100945, 1107711, 1107715, 1108111, 1118715, 2349, 4318002, 4389141, 46000482469, 482415, 482469VP, 482729, 483051, 548262, 549098, 549212, 8116, 833768, 850144, 936163, 936164, 937276, 938124, 938223, 938283, 938372, 941506, 941578, 941601, 941687, 945523, 978212, 987369, 989608, 992919, 99989710, AH376600, EA376600, and PS376600.

120V | 60Hz | .29A | 3000RPM | 3/4 inch shaft | (2) 1/4 inch and (1) 3/6 inch terminals | Wiring harness and fan blade included | Blade may be white or orange per manufacturer

It is important to disconnect your appliance from the power supply before servicing.

Make sure to match up your H/P needed otherwise installing a lower H/P motor will cause it to overheat and not work properly. HVAC replacement motors are manufactured under strict quality standards at one of the world's largest and most modern motor production facilities. Every motor undergoes a variety of stringent tests before it leaves the assembly line. | Motor speed tap lead color Black - High | Motor speed tap lead color Blue - Medium | Motor speed tap lead color Red - Low

Fits models: 1971, 10584, WG840584, FD1026, and 43584 | Application: Blower | Bearing type: Sleeve | Drive type: Direct drive | FLA at 208V (A): 1.60 | FLA at 230V (A): 1.60 | Frame size: 48 | Frequency (Hz): 60 | High speed (RPM): 1075 | HP: 1/4 | Input voltage (V): 208/230

Keyed/Flat shaft length (inch): 4 | Motor body diameter (inch): 5-5/8 | Motor body length (inch): 5-3/8 | Mounting: Shell-band, thru-bolt | Number of phases: 1 | Number of speeds: 3 (1075/950/850) | Overall motor length (inch): 10-3/8 | Overall shaft length (inch): 5 | Rotation direction (OSE): Reversible | Run capacitor (uF/V): 10/370 | Shaft diameter (inch): 1/2

Please see Model Number fitment information at the bottom of this page before placing your order for this part. Alternate part numbers include SM3404 and 621787. Must match specs of current motor to function correctly. Popular models include for this motor include M1MB 056A BW, M1MB 070A BW, M1MB 077A BW, and M1MB 090A BW.

120VAC | 37.25W | 60Hz | 0.8A | 3000RPM | Size: 10.3 x 10.4 x 10.8 Inches

It is important to disconnect from the power supply before servicing. Service Tip: It is recommended to the replace the draft inducer gasket seal, or seal with high temperature silicone sealant to prevent carbon monoxide from leaking into the home.

Please see Model Number fitment information at the bottom of this page before placing your order for this part. Alternate part numbers include AP6891872, 297279502, 4931052, and PS12728810.

115V | 60Hz | 3.1W | Turns the condenser fan blade to move air across the coil | Fits model specific refrigerators

It is important to disconnect your appliance from the power supply before servicing.

Make sure to match up your H/P needed otherwise installing a lower H/P motor will cause it to overheat and not work properly.

HVAC replacement motors manufactured under strict quality standards at one of the world's largest and most modern motor production facilities. Every motor undergoes a variety of stringent tests before it leaves the assembly line.

Application: Condenser | Bearing type: Sleeve | Drive type: Direct drive | FLA at 208V (A): 1.0 | FLA at 230V (A): 1.0 | Frame size: 48 | Frequency (Hz): 60 | High speed (RPM): 825 | HP: 1/6 | Input voltage (V): 208/230 | Keyed/Flat shaft length (inch): 4 | Motor body diameter (inch): 5-5/8 | Motor body length (inch): 4-5/16 | Mounting: Shell-band, shell-screw, thru-bolt | Number of phases: 1 | Overall motor length (inch): 9-1/16 | Overall shaft length (inch): 4-1/2 | Rotation direction (OSE): Reversible | Run capacitor (uF/V): 5/370 | Shaft diameter (inch): 1/2

Make sure to match up your H/P needed otherwise installing a lower H/P motor will cause it to overheat and not work properly.

HVAC replacement motors manufactured under strict quality standards at one of the world's largest and most modern motor production facilities. Every motor undergoes a variety of stringent tests before it leaves the assembly line.

Application: Blower | Bearing type: Sleeve | Drive type: Direct drive | FLA at 120V (A): 9.50 | Frame size: 48 | Frequency (Hz): 60 | High speed (RPM): 1075 | HP: 3/4 | Input voltage (V): 120 | Keyed/Flat shaft length (inch): 4 | Motor body diameter (inch): 5-5/8 | Motor body length (inch): 6-3/8 | Mounting: Shell-band, thru-bolt | Number of phases: 1 | Number of speeds: 3 | Overall motor length (inch): 11-3/8 | Overall shaft length (inch): 5 | Rotation direction (OSE): Reversible | Run capacitor (uF/V): 15/370 | Shaft diameter (inch.): 1/2 | Motor speed tap lead colors are as follows: Black - High, Blue - Medium, Red - Low

Make sure to match up your H/P needed otherwise installing a lower H/P motor will cause it to overheat and not work properly.

HVAC replacement motors manufactured under strict quality standards at one of the world's largest and most modern motor production facilities. Every motor undergoes a variety of stringent tests before it leaves the assembly line.

Application: Condenser | Bearing type: Sleeve | Drive type: Direct drive | FLA at 208V (A): 2.50 | FLA at 230V (A): 2.50 | Frame size: 48 | Frequency (Hz): 60 | High speed (RPM): 1075 | HP: 1/2 | Input voltage (V): 208/230 | Keyed/Flat shaft length (inch): 4 | Motor body diameter (inch): 5-5/8 | Motor body length (inch): 5-9/16 | Mounting: Shell-band, shell-screw, thru-bolt | Number of phases: 1 | Number of speeds: 1 | Overall motor length (inch): 10-9/16 | Overall shaft length (inch): 5 | Rotation direction (OSE): Reversible | Run capacitor (uF/V): 15/370 | Shaft diameter (inch): 1/2

Make sure to match up your H/P needed otherwise installing a lower H/P motor will cause it to overheat and not work properly.

HVAC replacement motors manufactured under strict quality standards at one of the world's largest and most modern motor production facilities. Every motor undergoes a variety of stringent tests before it leaves the assembly line.

Application: Blower | Bearing type: Sleeve | Drive type: Direct drive | FLA at 120V (A): 3.80 | Frame size: 48 | Frequency (Hz): 60 | High speed (RPM): 1075 | HP: 1/4 | Input voltage (V): 120 | Keyed/Flat shaft length (inch): 4 | Motor body diameter (inch): 5-5/8 | Motor body length (inch): 5-3/8 | Mounting: Shell-band, thru-bolt | Number of phases: 1 | Number of speeds: 3 | Overall motor length (inch): 10-3/8 | Overall shaft length (inch): 5 | Rotation direction (OSE): Reversible | Run capacitor (uF/V): 10/370 | Shaft diameter (inch): 1/2