Best A Premium Oil Pumps in 2026

APPLICATIONS: ideal for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment

EQUIPPED WITH: external test/run level; galvanized steel "quick install" wall mount bracket; rubber feet for vibration noise dampening; oil resistant tank and check valve; 20-ft. 3/8-inch ID tubing

INCLUDES OVERFLOW DETECTION SWITCH: dual function NO and NC operation; shuts off equipment or can be attached to audible or visual alarm or security system

APPLICATIONS: ideal for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment

COMES EQUIPPED WITH: external test/run level; galvanized steel "quick install" wall mount bracket; rubber feet for vibration noise dampening; oil resistant tank and check valve

BASIC CONDENSATE PUMP: this unit does not come with an overflow detection switch

APPLICATIONS: ideal for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment

COMES EQUIPPED WITH: external test/run level; galvanized steel "quick install" wall mount bracket; rubber feet for vibration noise dampening; oil resistant tank and check valve

INCLUDES OVERFLOW DETECTION SWITCH: dual function NO and NC operation; shuts off equipment or can be attached to audible or visual alarm or security system

UNIQUE DUAL DISCHARGE DESIGN: this pump allows for operation of 2 water features simultaneously; both discharges are 1.25-inch FNPT; cap and 1-inch 90° barbed elbow included

APPLICATIONS: high pressure oil-free direct drive pump is ideal for pond filtration, waterfalls, streams, fountains and water features up to 1200 gallons

VERSATILE: this pump can be used vertically or horizontally to fit most waterfall vaults or fountains; this pump comes with a 16-ft. cord

APPLICATIONS: for commercial, industrial and home applications including statuary fountains, water displays, air conditions, machine tool coolants, hydroponics and other water transfer applications

BUILT TO LAST: with features such as epoxy coated die-cast aluminum housing; oil-filled motor housing; impedenace protected, and screened inlet which prevent debris from damaging the impeller

SMALL SUBMERSIBLE PUMP: for submersible use only; equipped with 1/4-inch MNPT discharge; 3.6 inches long x 4.09 inches wide x 4.25 inches high

APPLICATIONS: designed for commercial, industrial and home use including fountains, water displays, air conditioners, machine tool coolants, and other water transfer/recirculation applications

CORROSION-RESISTANT CONSTRUCTION: glass-filled nylong housing, cover, screen, volute and impeller; nitrile shaft seal

SCREENED INTAKE: filters out debris which protects the impeller from damage

UNIQUE DUAL DISCHARGE DESIGN: this pump allows for operation of 2 water features simultaneously; both discharges are 1.25-inch FNPT; cap and 1.25-inch 90° barbed elbow included

APPLICATIONS: high pressure oil-free direct drive pump is ideal for pond filtration, waterfalls, streams, fountains and water features up to 2400 gallons

VERSATILE: this pump can be used vertically or horizontally to fit most waterfall vaults or fountains; this pump comes with a 16-ft. cord

DUAL PURPOSE PUMP: the 3E-34N can be used in-line or as a submersible pump for use in the home, in workshops, or in commercial/industrial fields

SUBMERSIBLE PUMP: It Is ideal for applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated.

IN-LINE PUMP: This pump features 3/4-inch MNPT intake and 1/2-inch MNPT discharge

BUILT TO LAST: Epoxy coated die-cast aluminum housing and motor cover offers rust-resistant protection

REMOVABLE SCREEN: polypropylene intake screen prevents debris from damaging the impeller

DUAL PURPOSE PUMP: can be used totally submersed or in-line (fed with a pipe or hose)

APPLICATIONS: designed for commercial/industrial/residential use where liquid must be transfered or recirculated; such as water displays, ice makers, air conditioners, boat bailing, fuel oil transfer

MILD CHEMICAL RESISTANCE: can be used for soap solutions, acid plating solutions, and fertilizers

BUILT TO LAST: Epoxy-coated die-cast aluminum housing, polypropylene volute and elbow, Nitrile shaft seal; impedance protected motor; CSA listed in the USA and Canada

APPLICATIONS: for commercial, industrial and home use in statuary fountains, small ponds, water displays, air conditioners, machine tool coolants and other water transfer or recirculation applications

BUILT TO LAST: Oil-less epoxy encapsulated motor, thermal overload protection, glass-filled polyester housing and cover, nylon volute and impeller and Viton shaft seal

HOODED VOLUTE DESIGN: keeps pump primed even in shallow water; screened intake protects the impeller from damage

BUILT TO LAST: Epoxy coated die-cast aluminum housing and motor cover offers rust-resistant protection

SUBMERSIBLE PUMP: Able to handle intermitten temputeratures up to 120 degrees F

ENERGY EFFICIENT MOTOR: 115 Volts, 100 Watts, 1.7 Amps, with Thermal Overload Protection,cCSAus listed

115-VOLT PUMP FOR SUBMERSIBLE OR IN-LINE USE: with removable pre-filter screen; 1/2-inch MNPT Discharge, 1/2-inch FNPT Intake

BUILT TO LAST: Epoxy coated cast aluminum housing, able to handle intermittent liquid temperatures up to 120 degrees F, thermal overload protected motor

DIRECT DRIVE MOTOR: 115-Volt, 3.2 Amps at 60 HZ, 200 Watts, Thermally Protected, 6-ft. Cord

APPLICATIONS: for commercial, industrial and home use in statuary fountains, small ponds, water displays, air conditioners, machine tool coolants and other water transfer or recirculation applications

BUILT TO LAST: Oil-less epoxy encapsulated motor, thermal overload protection, glass-filled polyester housing and cover, nylon volute and impeller and Viton shaft seal;

HOODED VOLUTE DESIGN: keeps pump primed even in shallow water; screened intake protects the impeller from damage

APPLICATIONS: this small, oil-filled pump can be used submersed or inline for a variety of water transfer/recirculation purposes around the home, in workshops or in commercial/industrial applications

VERSATILE: For commercial, industrial or home applications including statuary fountains, water displays, air conditioners, machine tool coolants, recirculation, water transfer

BUILT TO LAST: Epoxy coated die-cast aluminum housing and motor cover; nylon volute and impeller; triple-lip Nitril shaft seal; polypropylene screen

PREMIUM STAINLESS STEEL AND BRONZE CONSTRUCTION: suitable for freshwater or saltwater applications in ponds, large-sized fountains, water displays, waterfalls, aeration and in hot water applications

EQUIPPED WITH: built-in flow control; 20-ft. power cord with 3-prong plug

INLET FILTER INCLUDED: protects pump from debris when used submerged or remove to use inline; note: pump is not self-priming and must be located below the water level height

APPLICATIONS: this small submersible, oil-filled, epoxy-coated die-cast aluminum pump is designed for continuous circulation of statuary fountains or hydroponics

BUILT TO LAST: epoxy-coated die-cast alumnum housing, polypropyene volute, impeller and pre-screen, Nitrile shaft seal, stainless steel motor shaft

SCREENED INTAKE: protects the impeller from damage and prevents the impeller from stopping and damaging the motor; easily removed for cleaning and maintenance

APPLICATIONS: wet rotor pump construction without mechanical seal or oil is ideal for ponds up to 2700 gallons; 2-inch MNPT and SPIG discharge

2 PRE-SCREENS INCLUDED: removable fastener holds screen in place, modular design allows for single or multiple pre-screens

VERSATILE: can be positioned vertically or horizontally; can be used submerged or in-line; accepts 2-inch threaded fitting or rubber coupling

Product 1: UNIQUE DUAL DISCHARGE DESIGN: this pump allows for operation of 2 water features simultaneously; both discharges are 1.25-inch FNPT; cap and 1-inch 90° barbed elbow included

Product 1: APPLICATIONS: high pressure oil-free direct drive pump is ideal for pond filtration, waterfalls, streams, fountains and water features up to 1200 gallons

Product 1: VERSATILE: this pump can be used vertically or horizontally to fit most waterfall vaults or fountains; this pump comes with a 16-ft. cord