Best Acrylic Based Paint Primers in 2026

2k CLEAR COAT: Our special aerosol spray is a high-gloss clear coat spray that provides maximum shine. It will not only protect the sprayed surface from minor scratches but also allows it to maintain a clean a finish, that ensures the surface will look as good as new for years to come.

HOW TO USE: Use 1-2 spray passes with 50% overlap. Approx. 1.2-mil per spray pass. Allow 3-7 minutes flash between coats depending on temperature. Then fully cure in 12 hours at 68 degrees Fahrenheit, 35-40 minutes at 140 degrees Fahrenheit (IR drying).

EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support.

Withstands Up To 600 Degrees Fahrenheit To Protect Exhaust Components

Perfect For Protecting Hangers, Tailpipes And Mufflers

Easy-To-Apply Aerosol Formula Covers Exhaust Components From The Manifolds Or Headers Back

Eastwood Extreme Chassis Black Satin Aerosol 14 OZ Improves Corrosion Resistant

Helps seal rust and improves resistance against chips and scratches

matches OEM automotive paint

2-Component Catalyzed Technology.Two Chamber Design Aerosol

Most Durable Aerosol Urethane Primer Available

Sprays Like A Paint Gun

BLACK EPOXY PRIMER: The Eastwood Epoxy Primer and sealant, mixes 1:1 with Epoxy Primers 50243ZP. Perfect as a sealer for a wide range of materials steel, fiberglass, car body filler, aluminium and much more. Especially effective for metal rust corrosion prevention, increasing the lifetime quality of your paintwork.

HOW TO USE: Made here in the USA our Epoxy Primer and sealer gives a long lasting high quality finish, and when mixed with our catalyst Epoxy activator 502423P typically you'll only need 1 or 2 medium wet coats to achieve a strong 1mm dry film thickness. Suitable to be wet sanded the next day, and dry sanded after 2 to 3 days.

EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support.

Fast Drying & Maintains Good Color Holdout

Mix 1:1 With Epoxy Primers 14760ZPA, 50244ZP or 50246ZP

Excellent Adhesion And Corrosion Resistance

Duplicates The Sheen And Appearance Of Many Oem Black Wheels

Matches Factory Appearance

Durable And Long Lasting

Fast Drying & Maintains Good Color Holdout

Requires Catalyst 50245ZP Sold Separately

Excellent Adhesion And Corrosion Resistance

Duplicates The Look Of Dark Charcoal Gray Oem Zinc Phosphate Plating

Nearly Flat 4-8% Low Gloss Finish

Temperature Resistant To 300°F

With A Just-Right Amount Of Sheen, This Satin Black Is Perfect For Old School Street Rod

Catalyzed Urethane For Unsurpassed Durability

Highly Resistant To Uv Rays, Chemicals, Chips

2-Component catalyzed technology

Two chamber design aerosol

Most durable aerosol urethane primer available

BLACK EPOXY PRIMER: The Eastwood low voc Epoxy Primer and sealant, mixes 1:1 with catalyst 50245ZP. Perfect as a sealer for a wide range of materials steel, fiberglass, car body filler, aluminium and much more. Especially effective for metal rust corrosion prevention, increasing the lifetime quality of your paintwork.

AMAZING ADHESION: Made here in the USA our direct to metal low voc black epoxy primer provides excellent adhesion, what's more it's great to work with due to it's fast drying and colour hold out. Once you've allowed primer to dry it will be sandable within 2 - 3 days. The 1 gallon will provide you with approximately 140 SQ ft of coverage, and typically one to two coats is enough to achieve the desired 1 mil.

EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support.

Enhance Durability Of Powder-Coated Finishes With This Epoxy-Based Primer

If The Utmost Corrosion Resistance And Adhesion Are Important To You, You'Ll Want To Use This Primer

For Best Results Apply To Clean Bare Metal And Place In A Preheated 400-Degreef Oven Until Flow Out Occurs

Duplicates The Look Of Bluish Gray Oem Clear Zinc Plating

Low Luster 11-15% Finish

Temperature Resistant To 300°F

Enhance Durability Of Powder-Coated Finishes With This Epoxy-Based Primer

If The Utmost Corrosion Resistance And Adhesion Are Important To You, You'Ll Want To Use This Primer

For Best Results Apply To Clean Bare Metal And Place In A Preheated 400-Degreef Oven Until Flow Out Occurs

Matches factory appearance

Durable and long-lasting

60% gloss

Most durable & Chemical-resistant

Easiest-to-spray

Highly chip- and abrasion-resistant, Withstands up to 300 Degrees F

22 Square Feet per can

2-Component catalyzed technology

Epoxy formula with extreme anti-corrosion additives

Etches And Primes Bare, Rust-Free Metal In One Step

Lacquer-Based, Single-Stage Formula Requires No Catalyst

Enhances Adhesion And Durability Of Most Non-Epoxy Top Coats

Apply up to 2-3 coats (Allow 5-10 mins between each coat)

Optimum application temperature is 64-77F at 40-50% humidity

Tack free in 7-10 minutes. Sand after 60 Minutes