Best Open End Pipe Wrenches in 2026

Total 4-pieces Wrenches set : included 6 inch (150mm), 8 inch (200mm), 10 inch (250mm), 12 inch (300mm)

Max Jaw Capacity : 15/16 in. (24mm), 1-3/16 in. (30mm), 1-3/8 in. (35mm), 1-1/2 in. (41mm)

Reversible Jaw : combines the functionality of an adjustable wrench and a pipe wrench, within one serrated side for tightening and loosening pipes and rusty nuts, and one smooth side for daily work

For strainer lock nuts & drop-in shower drains

Fits hex nuts and all 4-, 6- and 8-tab locking nuts on strainer drains

Square end of the tool is specifically designed for tightening stand-up shower drains

Heavy-duty jaws lock on to three sides of a hex fastener, and won't slip or mark the work piece.

Built-in wire cutter means you don't have to switch tools. Constructed of high-grade heat-treated alloy steel for maximum toughness and durability.

Guarded trigger gives you a quick release while helping prevent accidental release.

Fits nut and water pipe sizes and wrench details: This wrench is suitable for 1/2" (DN15), 3/4" (DN20) hex nuts and 4 point, 6 point water pipe fittings. Our wrenches are 10.21 inches long and have a maximum diameter of 2.06 inches. The internal dimensions of the wrench head are (from inside to outside) 2.1cm & 2.35cm & 2.8cm.（0.83 inch & 0.93 inch & 1.1 inch)

A wrench suitable for replacing sink and faucet nuts, we recommend that you carefully read the product's precautions and specific instructions when purchasing. can help you understand and use our wrenches most accurately. If you do not fully understand the performance and purpose of the product, please contact us. We will answer you in detail.

Material: high-strength ABS engineering plastic, non-slip texture, easy to release arm force. important! ! ABS plastic cannot replace the hardness of steel. It is recommended to use appropriate force when working (maximum force should not exceed 500N).

Soft vinyl grip

Heavy duty construction

One side is a spanner wrench for hex nuts, other side is to tighten faucets to shanks or towers.

3 Tools in 1, Adjustable Wrench, Pipe Wrench, Pass-Thru Ratchet

Each Socket Fits 6 Fastener Types. Hex, Square, 12 Point, E-Torx, Partially Rounded Hex, Spline

11 Pieces SAE and MM Combo Sockets

Excellent Performance: YIOU impact wrench is specially designed for tightening and loosening various hex-head bolts, nuts, and lag screws. It employs both rotational torque and short-burst concussive impacts to deliver an unparalleled amount of power. YIOU cordless impact wrenches can easily produce torque outputs of over 220 foot-pounds, which is more than enough muscle to power-drive the fattest lags and bust loose rusty, corroded nuts.

Higher Voltage: 20-volt YIOU wrenches with advanced features and capabilities make them more versatile and easier to use.And 4820 brushless motor has higher efficiency and longer running time.In addition,YIOU wrench set is ideal for grooved couplings, pipe flanges, wheel lugs, concrete anchor setting and many other applications where a lot of torque is needed in a compact space.

Controlled Speed: YIOU impact driver has variable-speed triggers, which means that the speed at which the wrench turns is controlled by pressing the red setting button.And YIOU also equipped it's impact gun with an LED light for maximum visibility.While pressing the trigger, the LED lighting will automatically switch on.

Excellent Performance: YIOU impact wrench is specially designed for tightening and loosening various hex-head bolts, nuts, and lag screws. It employs both rotational torque and short-burst concussive impacts to deliver an unparalleled amount of power. YIOU cordless impact wrenches can easily produce torque outputs of over 220 foot-pounds, which is more than enough muscle to power-drive the fattest lags and bust loose rusty, corroded nuts.

Higher Voltage: 20-volt YIOU wrenches with advanced features and capabilities make them more versatile and easier to use.And 4820 brushless motor has higher efficiency and longer running time.In addition,YIOU wrench set is ideal for grooved couplings, pipe flanges, wheel lugs, concrete anchor setting and many other applications where a lot of torque is needed in a compact space.

Controlled Speed: YIOU impact driver has variable-speed triggers, which means that the speed at which the wrench turns is controlled by pressing the red setting button.And YIOU also equipped it's impact gun with an LED light for maximum visibility.While pressing the trigger, the LED lighting will automatically switch on.

Smooth jaw won't mar surfaces

Up to 3 points of contact for a secure grip

Ergonomic handle design that helps prevent fatigue and slip

Ideal for removing broken threaded pipe ends, plugs and fittings

Installation and removal without thread damage

Eccentric cam action engages wrench against the walls of the pipe

➤ KARRYTON Aluminum pipe wrench set included 10 inch, 14 inch, 18 inch and 24 inch pipe wrenches, max jaw opening capacity of 1-5/8", 2-3/4", 3-1/4" and 4". Straight handle made of Aluminum Alloy and jaw made of Chromium-Molybdenum (Cr-Mo) Steel, WILL NOT break or Warp.

➤ Pipe wrench’s aluminum handle 40% lighter than cast iron wrenches offers a great durability and lightweight during using it. Grey anti-rust and anti-oxidation spray coating on the surface. The long I-beam handle which is comfortable to hold with wear-resistant and non-slip quality.

➤ The hardness of precision machine teeth is extremely high after quenching, making sure to always grip pipes securely and tightly. The non-stick nut has a self-cleaning threads runs smoothly for quick adjustment of various pipe sizes.

[8-INCH JAW OPENING] KARRYTON 48 Inch Aluminum pipe wrench is perfect for pipe diameters of 2" to 6" with a jaw opening capacity of up to 8-inch/200 mm. Straight handle made of Aluminum Alloy and jaw made of Chromium-Molybdenum (Cr-Mo) Steel, WILL NOT break or Warp.

[ALUMINUM I-BEAM HANDLE] KARRYTON pipe wrench’s aluminum handle 40% lighter than cast iron wrenches. Grey anti-rust and anti-oxidation spray coating on the surface. The long I-beam handle which is comfortable to hold with wear-resistant and non-slip quality. A pair of industrial-grade Nitrile palmed gloves included for safe operation.

[Cr-Mo JAW & ADJUSTABLE NUT] The entire wrench head is drop forged from Chromium Molybdenum Carbon steel. The hardness of the teeth is extremely high after quenching, making sure to always bite on the pipes. The non-slip nut runs smoothly for quick adjustment of various pipe sizes.

90° Angled jaw locks pliers , Max jaw opening 1-9/16" (40mm), Pipe clamping dia. 1", Overall length 12", Weight 1.54lb

Swedish type pipe wrenches, features slim head allow to access tight space and corner, Ideal for front end alignment, tie rods, plumbing fittings, Recomend for plumbers and homeowners

Construation of Forged Cr-V steel and oil-hardened for strength and durability. Polished finish surface, Hardened serrated jaw for powerfully grips

Ideal for removing broken threaded pipe ends pipe plugs and fittings

Installation and removal without thread damage

Eccentric cam action engages wrench against the walls of the pipe

Ideal for removing broken threaded pipe ends pipe plugs and fittings

Installation and removal without thread damage

Eccentric cam action engages wrench against the walls of the pipe

Ideal for use in tight spaces

Extends to 17”

Can accommodate up to 1” hex and square nuts

These adjustable wrenches are called universal wrenches because they will fit absolutely everything

They work with all systems of measurement- no need to adjust from metric to SAE

With just one hand operation, they to automatic ratcheting

Adjustable range of wrench tool: The wrench size can be adjusted to 4AN, 6AN, 8AN, 10AN, 12AN, 16AN

Hex jaws: The shape of the wrench jaw is hexagonal, which is more conducive to protecting the accessories, and it is easy to hold the accessories

Multi-purpose: It can be used for car modification, extrusion of automobile and motorcycle oil pipe interface, and can also solve your faucet, valve, pipe, radiator, boiler, wheel and other problems

【High-Quality Material】 The adjustable wrench is made of high-quality aluminum alloy with high durability, impact resistance and high toughness. The universal wrench is light and not bulky, and using it can greatly improve your work efficiency.

【Multifunctional Adjustable Wrench】 The adjustable wrench sets can adjust the opening size, the maximum opening can be up to 80mm, suitable for 99% of the nuts, the end of the spanner wrench is a water pipe wrench, with three different types of accessories, suitable for different types of sink pipe fittings, you can according to your need to be replaced to meet your different needs.

【Anti-slip Design】 The plumbing wrench is designed with canine teeth, has a strong bite force, especially for round pipe fittings, it will not slip when used, especially suitable for the removal and installation of various sink accessories. This spud wrench will bring you a different feeling of use than before.

Material: Stainless Steel

Color: Silver

Type: Pipe Wrench

Material--Wrench Extender is Made of 40CR alloy steel with high frequency quenching for impact, rust, and corrosion resistance, the hardness is at 38-42Hrc.

Extra Leverage--Torque Amplifier provides extra leverage. Perfect for removing tight bolts, nuts, rusted bolts, stuck fasteners, and over-tightened nuts. Also, The 1/2" square drive at the end can be used with a breaker bar or ratchet wrench to provide even more leverage.

Compatibility--The wrench extension tool is compatible with most standard wrenches,including Hex Key, Allen Key, TX wrench set, XZN wrench set, socket wrench tool, adjustable wrench set, impact socket set, pry bar set, pipe wrench set, and Auto tools set.

➤ KARRYTON 24" Aluminum offset pipe wrench features a jaw opening parallel to the handle and a narrower hook jaw head to provide easy entry into tight spots and at awkward angles. Ideal for overhead applications. 24 Inch offset wrench is perfect for pipe diameters of 1.5” to 2.5” (40mm-65mm), with a max jaw opening of 4” / 101mm. It WILL NOT break or warp. A pair of industrial-grade Nitrile palmed gloves included for safe operation.

➤ Pipe wrench’s aluminum handle 40% lighter than cast iron wrenches of same size offers a great durability and lightweight during application. Grey anti-rust and anti-oxidation spray coating on the surface. The long I-beam handle which is comfortable to hold with wear-resistant and non-slip quality.

➤ Hook jaw and heel jaw both made of drop forged CR-V (Chromium Vanadium) steel. The hardness of precision machine teeth is extremely high after quenching, making sure to always grip pipes securely and tightly. The non-stick nut has self-cleaning threads runs smoothly for quick adjustment of various pipe sizes.

【Capacity】 12 Inch adjustable hex pipe wrench easily fits pipe nuts with a capacity of 1-1/8" in (29 mm) to 2-5/8" (67 mm).

【Secured Grip】 Hex jaw design that provide a secure grip on multi-side of square nuts, hex nuts, unions and valve nuts.

【Thin and Smooth Jaws】 The thin, smooth jaws slide effortlessly into even the tightest and most restricted wall-based spaces, saving time and effort.