Best Rotary Pneumatic Air Cylinders in 2025

It is a double‑acting rotary clamping corner press cylinder with an inner diameter of 25mm.

The shape is small and can be rotated by 90 degrees, which is convenient, fast and labor‑saving.

The maximum working pressure with this rotary pneumatic cylinder can reach 1.0MPa.

Msqb10A Pneumatic Cylinder --- Made of high quality aluminum alloy cylinder, sturdy, anti-corrosion and not easy to rust.

15mm Rotate Cylinder --- With the increase of pressure, it automatically improves the sealing performance and lasts for a long time

Hydraulic Cylinders --- With angle adjustment unit, you can adjust the angle at 0-180°

This is a 1 port cylinder

For a 2 port, see our other product listings

➤➤【HIGH QUALITY AND DURABLE】- Made of high quality aluminum alloy cylinder, sturdy, anti-corrosion and not easy to rust.The surface of the cylinder has increased the hard oxidation technology,which increases the surface hardness of the cylinder,is not easy to deform,and is durable.

➤➤【FIRMLY STRUCTURE】- This is a rotary cylinder, which uses the force of air to rotarying through the Vane ,and the piston seal adopts a stable sealing structure with excellent oil storage function.

➤➤【180 DEGREE ROTARY PNEUMATIC AIR CYLINDER】- Built-in magnetic ring for magnetic switch.With angle adjustment unit,you can adjust the angle at 0-180°.

【High quality and durable】Made of high quality aluminum alloy cylinder, sturdy, anti-corrosion and not easy to rust.

【Feature】With the increase of pressure, it automatically improves the sealing performance and lasts for a long time.

【180 degree rotary pneumatic air cylinder】Built-in magnetic ring for magnetic switch. With angle adjustment unit, you can adjust the angle at 0-180°.

【EXCELLENT PERFORMANCE】Our cylinders are standard vane type swing cylinders, with magnetic switch, and are made of high-quality materials, durable, long service life, good quality, worthy of your trust. It's your best choice

【EASY TO USE】Small size, easy to carry and store, easy to use, good performance, many cylinder stop positions, high control accuracy, you can choose and use according to your own needs, easy to use and durable

【STRONG PRACTICABILITY】Cylinder is good at reciprocating linear motion, especially suitable for many transmission requirements in industrial automation, especially practical, can meet most of the needs, very practical

【No Leakage】Our vane type rotary actuator adopts special sealing structure, the leakage is very small, can be installed directly, simple and convenient

【Firmly Structure】This is a rotary cylinder, which uses the force of air to rotarying through the Vane , and the piston seal adopts a stable sealing structure with excellent oil storage function

【Good Sealing】 The rotary pneumatic cylinder new type of air chamber seals and new type of rotating blades, easy to operate, accurately adjustable swing angle

The shape is small and can be rotated by 90 degrees, which is convenient, fast and labor‑saving.

With high speed, the maximum operating speed can reach 200mm per second.

Made of high‑quality aluminium alloy, which makes it more durable and long‑lasting.

☀☀☀Made of alloy steel material, which can work normally in high and low temperature environment and has the ability of dustproof and waterproof.

☀☀☀Roller bearing design, large output force, load is 3 to 4 times larger than CRQ series.

☀☀☀The swing is glossy and accurate, with a built‑in magnetic ring and a magnetic switch can be installed.

【Work pressure】 The cylinder inner diameter is about 25 mm/0.98 inches, the piston rod outer diameter is about 14 mm/0.6 inches, the working pressure range is 0.15-1.0mpa (22~145psi), and the maximum operating speed can reach 200mm per second.

【High speed operation】 The surface of the M5x0.8 rotary pneumatic cylinder is oxidized to extend its service life, and the composite action type cylinder can run at high speed.

【90 degree rotation】 The double-acting cylinder with an inner diameter of 25mm has a small appearance, can be rotated 90 degrees, has a small size and a simple structure, which can be easily carried and installed within a few minutes.

[Angle Adjustable] The rotary cylinder uses an angle adjustment unit, and can be adjusted by 0 to 190 degree, the swing is smoothly and accurate.

[Design Feature] Built in magnetic ring, can be installed with magnetic switch. The cylinder is double acting, alternating air supply from both sides of the piston, one or two way output force.

[Aluminum Alloy Made] The cylinder is made of aluminum alloy, which is sturdy, hard to corrode and rust, can work normally in high and low temperature environment, and has the ability to and water.

[Angle Adjustable] The rotary cylinder uses an angle adjustment unit, and can be adjusted by 0 to 190 degree, the swing is smoothly and accurate.

[Design Feature] Built in magnetic ring, can be installed with magnetic switch. The cylinder is double acting, alternating air supply from both sides of the piston, one or two way output force.

[Aluminum Alloy Made] The cylinder is made of aluminum alloy, which is sturdy, hard to corrode and rust, can work normally in high and low temperature environment, and has the ability to and water.

Excellent Material: This pneumatic swing clamping cylinder is made of pure aluminum block through CNC machining center, non-die-casting aluminum, high density and high strength, support long time work.

Hard Oxidation Treatment: The mirror inner wall surface of this pneumatic swing clamping cylinder is hard anodized to prolong the service life of the cylinder.

Protective Layer: The hard protective layer of this pneumatic swing clamping cylinder is not easy to be worn, not easy to be corroded, and can be used in harsh working environments.

[Angle Adjustable] The rotary cylinder uses an angle adjustment unit, and can be adjusted by 0 to 190 degree, the swing is smoothly and accurate.

[Design Feature] Built in magnetic ring, can be installed with magnetic switch. The cylinder is double acting, alternating air supply from both sides of the piston, one or two way output force.

[Aluminum Alloy Made] The cylinder is made of aluminum alloy, which is sturdy, hard to corrode and rust, can work normally in high and low temperature environment, and has the ability to and water.

[Angle Adjustable] The rotary cylinder uses an angle adjustment unit, and can be adjusted by 0 to 190 degree, the swing is smoothly and accurate.

[Design Feature] Built in magnetic ring, can be installed with magnetic switch. The cylinder is double acting, alternating air supply from both sides of the piston, one or two way output force.

[Aluminum Alloy Made] The cylinder is made of aluminum alloy, which is sturdy, hard to corrode and rust, can work normally in high and low temperature environment, and has the ability to and water.

【Port size】 PT1/8, 【Bore】 1" (25mm), 【Stroke】5"(125mm).

【 Max Pressure】1.0 MPa(145Psi).

【Action Type】Double Acting; 【Rod Type】Single Rod.

【Port size】 PT1/8, 【Bore】 1" (25mm), 【Stroke】2"(50mm).

【 Max Pressure】1.0 MPa(145Psi).

【Action Type】Double Acting; 【Rod Type】Single Rod.