Best Ubiquiti Networks Points in 2026

WHY CHOOSE UEEVII? 1. Professional wireless bridge brand, 2. Professional after-sales reply within 24 hours; 3. 1-year warranty replacement and lifetime technical support; 4. Sufficient inventory and continuous stock; 5. Low-end, mid-range, and high-end wireless bridges meet Your different needs; 6. Provide the most cost-effective network solution.

PLUG AND PLAY: CPE450 point to point wireless bridge is pre-configured point-to-point before leaving the factory, only need to connect other devices to the master bridge and the slave bridge respectively, and provide power.

300MBPS TRANSFER SPEED: The transmission speed between 2 ethernet bridges can reach 300Mbps, the outdoor WiFi bridge has two built-in 10/100Mbps RJ45 ports to provide you with a wired speed of up to 100Mbps, just connect an access point/router to the slave bridge and broadcast WiFi Get a wireless network.

Two installation methods: This wireless bridge bracket mount can be installed on a pole or wall-mounted, and you can choose to install it according to your needs, which is very convenient for you.

150 degree adjustment: The rod of wireless bridge bracket mount can be adjusted up and down by 150°. After you install the CPE, adjust the angle of the rod to receive signals of different strengths.

Firmness: This wireless bridge pole mount is designed with non-slip gears. After you adjust the angle of the rod, you only need to twist it lightly, and the rod will be firmly fixed. And this pole mount is equipped with two hoops to firmly fix your mount on the rod.

What can the UeeVii CPE453 long-range wireless bridge help you do? Extend your house network to the second building, such as garages, barns, shops, and even neighbors, without having to layout network cables, saving costs. Also suitable for surveillance cameras.

Cost-effective Hardware Configuration: Internet bridge adoption MTK's enterprise-class master chip, industrial-grade circuit design, supports IEEE802.11a/n/ac protocol and can provide stable wireless access speed and 10/100Mbps Ethernet exchange processing speed.

Outdoor IP65 Level Weatherproof: Outdoor wireless bridge has excellent anti-high and low-temperature design, fully protects user network data in the extreme environment, real-time, long-term, stable, and efficient transmission, enhance user experience.

CPE820 Gigabit wireless WiFi bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital tube display. Point-to-point pairing can be done by dialing without having to access the GUI, avoiding the complex setup program, saving much human work and cost, and making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional.

1000Mpbs digital display wireless bridge, transmission/receiver automatic networking, support point-to-point, point-to-multipoint, transmission/receiver flexible switching. WDS networking mode, video network dual compatible. The transmission speed between 2 bridges max is 1200Mbps. The highest network speed that can be achieved max is 433Mbpss.

1Gbps Wireless ethernet bridge conducted deep protocol optimization for wireless video surveillance transmission to ensure high-speed video transmission and smooth video surveillance, and the underlying wireless driver is optimized in-depth, using 5.8G IEEE 802.11ac single-band wireless transmission technology, with stronger anti-interference ability and better stability

UeeVii CPE-452 is an outdoor high power and 5.8G high-performance wireless bridge, that supports point to point and point to Multi-Point wireless connections. Pairing can be done by dialing without having to access the GUI, making the long-range wireless coverage, data transmission, and wireless monitoring simple and professional, and saving much human work and cost.

CPE-452 WiFi bridge built-in 14Dbi high-gain antenna enables the transmission rate between 2 wireless bridges to reach 300Mbps, the highest wire network speed that can be achieved max is 100Mbps. To achieve the bridge function, one needs to act as a receiver and the other one as a transmitter.

Point to point wireless bridge can automatically power adjustment to adapt to environmental changes, ensuring smooth video regardless of ultra-close distance, transmission distance up to 3km(Barrier-free), actual application distance should be less than 3KM. Trees will not block the transmission speed of the point-to-point internet wireless bridge, suitable for shop warehouses or garages next to your house.

Stainless steel material: The bracket is made of high-quality stainless steel, which has the characteristics of strong and sturdy, corrosion resistance, high temperature resistance, waterproof and lightning protection

360°adjustment: There are many small holes on the wireless bridge bracket plate, you can adjust it for 360°, which can easily meet your installation needs at any angle

Wall-mounted installation: The bracket mount is wall-mounted, suitable for any angle of the wall of the house, very suitable for fixing indoor and outdoor wireless bridges, outdoor access points and other equipments.

Package includes: Two black brackets, eight screws.

Wall-mounted installation: This Ueevii point to point wireless bridge bracket supports wall-mounted installation, you just need to fix the bracket to the wall with screws. Very easy to use.

Sturdy and durable: This wifi bridge bracket mount adopts carbon steel painting process, which has the characteristics of high hardness and wear resistance. 38mm diameter thick pipe make the installation stable.

WiFi 6 Network Technology: UeeVii WiFi 6 access point adopts the latest WiFi 6 802.11ax standard, with faster speed, lower latency, larger capacity, WPA3 more secure, TWT technology more power saving, and compatible with WiFi 5.

Dual-band Concurrent Design: Wireless access point is equipped with 2*5dBi 2.4G antennas and 2*5dBi 5.8G antennas, 2.4G can provide a rate of 574Mbps, 5.8G provides a rate of 1201Mbps, and the maximum concurrent rate of the whole machine can reach 1775Mbps.

Gigabit RJ45 POE Port: Indoor access point has 2 built-in Gigabit ports, one of which supports 48V standard 802.11af PoE power supply and adaptive WAN port, and the other port is convenient to expand other devices (such as cameras); the access point also supports 12V ~1.5A DC power supply, accessories do not include DC power adapter.

Dual Band Gigabit Speed: The UeeVii Wireless Bridge CPE features 2.4GHz 5.8GHz dual band wireless link, supporting both 2.4GHz 5.8GHz network equipments. Compared to single-frequency WiFi bridges, this dual-frequency support ensures compatibility with a wider range of devices and provides better stability and anti-interference ability; Also, this WiFi bridge supports fast speeds with a 100Mbps port and 1000Mbps ports, reaching a maximum transfer speed of 1200Mbps and network speed of 433Mbps.

Easy to Use: The 2-Pack Wireless Bridges come pre-paired and are plug and play, making it simple to use with point-to-point or point-to-multipoint applications (No technical knowledge required).

Long range up to 5KM: The outdoor wi-fi bridge point to point built-in a 16dBm directional antenna, the maximum 27dBm can automatically adjust the power to adapt to environmental changes, the transmission distance can reach 5km (barrier-free), and the actual application distance should be less than 5KM. Trees will not block the transmission speed of peer-to-peer internet wireless bridges, suitable for shops, warehouses or garages near home.

CPE028 is an outdoor high power and high-performance CPE, which works at 5G frequency. It supports Point to Point and Point to Multi-Point wireless connection. The transmission speed between 2 bridges max is 300Mbps. The highest network speed that can be achieved max is 100Mbps. To achieve the CPE function, one needs to act as a receiver and the other one as a transmitter.

Built-in 30W 30AH battery, which can be charged and discharged 1000 times, supports 12V DC output and can work continuously for 2 days on rainy days.

3KM Transmission distance: 3 km (visible unobstructed environment), actual application distance should be less than 3KM. Built-in 14DBi directional antenna can significantly improve the transmission and reception performance of wireless signals. Trees will not block the transmission speed of the wireless bridge, suitable for warehouses or garages next to your house.

This outdoor wireless bridge adopts AB automatic networking, you only need to transfer one end to A as the master bridge and the other end to B as the slave bridge to complete the pointtopoint dial-up pairing. The bridge was built in 2 100M network LAN/PoE port, and the highest network speed that can be reached is 100Mbps

Built-in 30W 30AH battery, which can be charged and discharged 1000 times, supports 12V DC output and can work continuously for 2 days on rainy days.

The CPE451 WiFi bridge has made in-depth protocol optimization for wireless video surveillance transmission, ensuring high-speed video transmission. At the same time, the bottom wireless driver is deeply optimized, with stronger anti-interference ability and better stability.

Dual gigabit port bridge: CPE902 is our new upgraded dual gigabit RJ45 port bridge, with a maximum wired speed of 900Mbps, and supports point-to-point, point-to-multipoint network expansion and monitoring expansion.

Built-in 30W 30AH battery, which can be charged and discharged 1000 times, supports 12V DC output and can work continuously for 2 days on rainy days.

5KM long-distance transmission: This outdoor point to point wireless bridge uses a 15dbi directional antenna, which can meet long-distance wireless transmission within 5KM. And the point to point internet bridge uses TVS protection devices to improve stability in bad weather, which is very suitable for outdoor use.

Two installation methods: This wireless bridge bracket mount can be installed on a pole or wall-mounted, and you can choose to install it according to your needs, which is very convenient for you.

150 degree adjustment: The rod of wireless bridge bracket mount can be adjusted up and down by 150°. After you install the CPE, adjust the angle of the rod to receive signals of different strengths.

Firmness: This wireless bridge pole mount is designed with non-slip gears. After you adjust the angle of the rod, you only need to twist it lightly, and the rod will be firmly fixed. And this pole mount is equipped with two hoops to firmly fix your mount on the rod.

Wifi6 Ceiling AP: The UAP66 ceiling AP is a high-performance, high-rate 11ax indoor dual-band ceiling AP that supports 2.4G and 5.8G dual-band wireless service. 2.4G provides a maximum access rate of 574Mbps, 5G provides a maximum access rate of 2402Mbps, and the system concurrent rate can reach up to 3,000 MBPS.

Dual Gigabit RJ45 port: The ceiling AP has two gigabit ports that one port supports 48V POE power supply and the other port is used to connect to other devices.

Flexible power supply mode: This Ueevii ceiling AP supports both 48V POE power supply and 12V DC power supply, which can be flexibly switched to satisfied your requirements.

UeeVii UAP180 access point adopts 2.4G&5.8G dual-band 802.11ac wireless technology standard, 5.8G single band can provide up to 867Mbps, allowing up to 120+ users to connect. Equipped with two 5dBi dual-band omnidirectional 360° high-power gain antennas, the 500mW transmit power can achieve 328FT large-area WiFi coverage (Clear sight).

Outdoor WiFi AP uses IP66 grade waterproof technology, effectively prevents the impact of bad weather such as wind, frost, rain, and snow on the equipment, ensures that the repeater maintains stable operation in harsh environments, and is very suitable for applications such as front and backyards and docks.

UeeVii outdoor AP comes with dual RJ45 Gigabit Ethernet ports, and the wired network speed can reach 1000Mbps. Both WAN/PoE and LAN/PoE ports support 802.3af 48V standard power supply, saving energy consumption and easy deployment; Support up to 164FT CAT 5e/6 network cable, PoE adapter is not waterproof, and waterproof measures should be taken.

WiFi 6 Network Technology: UeeVii WiFi 6 access point adopts the latest WiFi 6 802.11ax standard, with faster speed, lower latency, larger capacity, WPA3 more secure, TWT technology more power saving, and compatible with WiFi 5.

100 FT CAT7 ETHERNET CABLE: The length of 100 FT is enough for the vast majority of project installations, higher roofs, higher poles, and greater distances. Perfect for wireless bridges, outdoor APs, POE cameras.

Dual-band Concurrent Design: Wireless access point is equipped with 2*5dBi 2.4G antennas and 2*5dBi 5.8G antennas, 2.4G can provide a rate of 574Mbps, 5.8G provides a rate of 1201Mbps, and the maximum concurrent rate of the whole machine can reach 1775Mbps.

Wifi6 Ceiling AP: The UAP66 ceiling AP is a high-performance, high-rate 11ax indoor dual-band ceiling AP that supports 2.4G and 5.8G dual-band wireless service. 2.4G provides a maximum access rate of 574Mbps, 5G provides a maximum access rate of 2402Mbps, and the system concurrent rate can reach up to 3,000 MBPS.

100 FT CAT7 ETHERNET CABLE: The length of 100 FT is enough for the vast majority of project installations, higher roofs, higher poles, and greater distances. Perfect for wireless bridges, outdoor APs, POE cameras.

Dual Gigabit RJ45 port: The ceiling AP has two gigabit ports that one port supports 48V POE power supply and the other port is used to connect to other devices.

The package include:a set of UAP66 access point and a gigabit hardware controller

Wifi6 Ceiling AP: The UAP66 ceiling AP is a high-performance, high-rate 11ax indoor dual-band ceiling AP that supports 2.4G and 5.8G dual-band wireless service. 2.4G provides a maximum access rate of 574Mbps, 5G provides a maximum access rate of 2402Mbps, and the system concurrent rate can reach up to 3,000 MBPS.

Full Gigabit high performance intelligent WiFi authentication gateway: This AP hardware controller is equipped with 10 gigabit ports and provides the three-in-one AC, gateway, and POE functions. The AP network management gateway provides wireless data control services with large capacity, high performance, high speed, and easy maintenance.

The package include:UeeVii WiFi 6 access point and Gigabit Hardware Controller

WiFi 6 Network Technology: UeeVii WiFi 6 access point adopts the latest WiFi 6 802.11ax standard, with faster speed, lower latency, larger capacity, WPA3 more secure, TWT technology more power saving, and compatible with WiFi 5.

Full Gigabit high performance intelligent WiFi authentication gateway: This AP hardware controller is equipped with 10 gigabit ports and provides the three-in-one AC, gateway, and POE functions. The AP network management gateway provides wireless data control services with large capacity, high performance, high speed, and easy maintenance.

The package include:2-Pack wireless bridge, 1piece AP750 access point

UeeVii UAP180 access point adopts 2.4G&5.8G dual-band 802.11ac wireless technology standard, 5.8G single band can provide up to 867Mbps, allowing up to 120+ users to connect. Equipped with two 5dBi dual-band omnidirectional 360° high-power gain antennas, the 500mW transmit power can achieve 328FT large-area WiFi coverage (Clear sight).

Round Gigabit Wireless Bridge: CPE880 Gigabit Wireless bridge is a round 5.8G long-range WiFi extender outdoor CPE with digital tube display.The bridges built-in one 100Mbps port and one 1000Mbps port, the maximum transfer speed between 2 bridges is 1200Mbps. The maximum achievable maximum network speed is 1Gbps. WDS networking mode, video network dual compatibility.