Best Hot Tub Pool Spa Replacement Parts in 2026

Coverts INTEX pools with 1.25" clamp on fittings to 1.5" screw on fittings

Needed when upgrading from an INTEX 530 GPH or 1000 GPH Filter Pumpr to an INTEX 1500 GPH or larger system

Kit includes two adapters

REPLACEMENT PART: Dual split-hose plunger valve replaces your current worn out or malfunctioning pool part; Intex part number: 11872

MULTI-FUNCTIONAL: Opens and closes water flow from pools to filtration systems; Can split hoses to shut off pump suction or can be used for vacuuming

VERSATILE: Designed for use with various Intex pools and equipment providing versatile use

INCLUDED WITH REPLACEMENT PART: The replacement part set includes 1 plunger valve with O-ring (10747), 2 strainer connectors for 1.25-inch fitting (11070), 2 strainer grids (11072), and 1 pool inlet air nozzle set (12354)

INCLUDED WITH POOL INLET: Pool inlet air nozzle set includes the jet exterior, O-ring, fittings compatible with other set parts

COMPATIABLE WITH: This pool jet replacement part kit works with pool filter pumps with 1,050 to 1,900 gallons per hour flow rates. You can use these pool jet replacement parts with any Intex above-ground pool

Pool Filter Replacement Parts：Used for Intex 25004 2,500 GPH and Below Pool Filter Pump Replacement Seals Pack Parts.- (Note : In order to use it correctly, please confirm whether the model of your device matches before purchasing. Refer to Figure 2 for part dimensions. Thanks!!)

Replace intex pool pump 2500 gph ：These replacement pool parts fit Intex filter pump with flow rates rated at 2,500 gallons per hour and below. When installed, these pool valves purge air and sediment from the system before operating.

5 Intex Replacement Parts ： The Intex Replacement Filter Pump Seals Pack is a combination of 5 Intex replacement parts ：Includes 2 air release valve / sediment release valves (part No.10460), 2 air release valve O rings (part No.10264)，2 air release valve B's with O rings (part No.10725)，2 filter housing o rings (part No.11330)，2 O ring A's (part No.10712)

Intex 1.25-inch diameter accessory hose

Never hurts to have a spare

Suitable for Intex filter pump models:

Works with 1-1/4 inch(Outlet diameter: 32mm) hoses

Application: Fits for Intex, Bestway and Coleman Pools

Package comes with one T Joint Fitting Hose Connector for connecting, terminating, controlling flow, and changing the direction of piping

Replacement seals pack for 1,500 gph pumps and below

Included air release valve is designed to purge air and sediment from the system before operating

Gasket filtration cartridge for Intex 58604 and 56638

BUYERS PLEASE MEASURE PRIOR TO ORDERING THIS DOES NOT FOT 1-1/2" FITTINGS

Replaces Original 1 1/4" Hose System From Skimmer to Pump/From Filter to Return

1-1/4" (1.25 inch) inside diameter hose x 3' ft long

【What You Get】SUMMERBUDDY replacement pool parts kit include: 2* pool plunger valve, 1* 1.5" fitting outlet strainer grids, 1* 1.5" fitting inlet water nozzle.

【High Efficiency Filtration】The size of the hose connected to SUMMERBUDDY pool plunger valve is 1.5". Or you can install the plunger valve directly on the pump with 1.5" hose port. If your pool fitting size is 1.25", you need to use a knife to change the 1.25" fitting to 1.5" fitting

【Compatible】Works with the 1500, 2500 and 4000 gallon per hour filtration pumps as well as the Intex Saltwater Chlorinator and Intex sand filter pump. Compatible with Intex, Bestway, Coleman above ground pools.

Pool Filter Connection Hose 1-1/4" in diameter x 3 ft long

Highly flexible Medium Grade hose

Ideal for all Intex, Summerwaves, coleman and other above ground pools, softsides and filter pumps that require 1-1/4"connections

**INTEX Wet Set Vinyl Repair Patch** 6 Pack

Designed for Intex products

Great to have extras around for quick fixes

Assembly Kit - Includes 1 dual split hose plunger valve, 3 hose o-rings.

Multi-function - The dual split-hose plunger valve can split hoses to reduce pump suction or can be used for vacuuming. Can opens and closes water flow from pools to filtration systems.

Installation Requirements - Requires an Intex Pool with two 1.25" hose and 1.5" hose to work properly. You only have 1.25" hoses, then you need a adapter A to convert plunger valve with 1.5" to 1.25". | You only have 1.5" hoses, then you need two adapters B to convert hoses with 1.5" to 1.25".

【Compatibility】The pool filter pump part compatible with Intex Sand Filter Pump Systems.The sand filter o ring parts repair set replacement for Intex part number 25013.

【The Package Include】This sand filter pump part repair set comes with the following air release valve and O-ring part numbers:1×10460 , 1×11379, 1×10264, 1×11385, 4×11228, 1×11412, 1×11824, 1×11232, 1×11457.

【High Quality】Replacement for intex sand filter o ring made from heavy duty premium materials for durability and performance. Sand pump replacement parts for intex keep the pool filter running smoothly, ensuring that your pool is safe and up and running.

Replacement Seals Pack for 1500 GPH and Below Filter Pump

Compatible with Gasket filtration cartridge for Intex 58604 and 56638

Includes Air Release Valve and O-Ring

HOSE REPLACEMENT: Pump hose replaces your current worn out or malfunctioning hose

PROPER WATER FLOW: Allows water to flow back to your pool from your pump or filter pump for proper water flow

FITS A VARIETY OF EQUIPMENT: Designed for use with various Intex pools and equipment providing versatile compatibility

Replacement Part #: 25016.

Includes: Intex Skimmer Hose.

Replace your Intex 18' and larger Pool Strainers, requires 1.5" inside diameter hoses to use.

Assembly Kit - Includes 2 plunger valves, 2 hose o-rings, and 2 step washers.

Working Compatible - Works with Intex 1500, 2500 and 4000 gallon per hour filtration pumps, Intex saltwater chlorinator and Intex 2000 gallon per hour chlorinator pump combo. Suitable for most above ground pools and equipment on the market.

Efficiently Using - The plunger valves are easy to turn on/off. It can efficiently and conveniently stop the flow of your pool. Replace your old plunger valves or upgrade to the Intex Plunger Valve system, makes changing hoses and pumps a breeze.

👉👉👉Please confirm the size before purchasing, our sand filter part is not suitable for 12-inch pool sand pump. It can fit 8 to 8.5-diameter sand filter(refer to Figure 3), and check whether your brand equipment is suitable for use , our pool filter sand clamp is only suitable for Hayward series models, so please pay attention to check our list of compatible models, thank you!

✅【Product Overview】Sand Filter Flange Clamp Part Number : GMX600NM. Fit for Hayward pro series sand filter S144T and other sand filter valve clamp models.（Notice：This clamp will NOT work on Bestways or Intex Filters. It only applies to Hayward.）

✅【Compatible with】Our GMX600NM flange valve clamp fit for Hayward variflo xl clamp; It can be widely used in Hayward Pro-Series Sand filter the following models, S144T, S164T, S166T, S180T, S210T, S210S, S220T, S220T2, S230T, S244T, S244T2, S244S, S270T, S310T, and S360T for Hayward Above Ground, In Ground Pools filter.

Assembly Kit - Includes 1 plunger valves, 1 hose o-rings, and 1 step washers.

Working Compatible - Works with Intex 1500, 2500 and 4000 gallon per hour filtration pumps, Intex saltwater chlorinator and Intex 2000 gallon per hour chlorinator pump combo. Suitable for most above ground pools and equipment on the market.

Efficiently Using - The plunger valves are easy to turn on/off. It can efficiently and conveniently stop the flow of your pool. Replace your old plunger valves or upgrade to the Intex Plunger Valve system, makes changing hoses and pumps a breeze.

【Part Number】Pool drain cap for sand filter pumps and combo compatible with Intex replaces part 11456 drain valve cap.

【Compatibility】Sand filter drain cap fit for Intex model: 26323CA, 26323EH, 26331CA, 26331EH, 26335EH, 26337EH, 26351EH, 26351W, 26361CA, 26361EH, 26361W, 26365EH, 26371CA, 26371EH, 26375EH, 26381EH, 28643EG, 28645EG, 28647EG, 28651EG, 28675EG, 28679EG, 28946EH, 28948EH, SF70110-2, SF60110-2.

【High Quality】Pool drain valve cap is made of high-quality materials and is not easy to be damaged. Sand filter pump plug cap for Intex pool accessories have well tested by manufacturer to meet OEM standards for long term use.

What You Get - This kit includes 1* Dual Split Hose Plunger Valve, 1* plunger valve, 2* strainer grids for 1.25-inch pool fitting, and 1* inlet water nozzle for 1.5-inch pool fitting.

Control of Water Flow - With the plunger valves, you can easily control the flow of water in and out of your pool, ensuring that everything runs smoothly and efficiently.

Easy to Install - With their durable construction and easy-to-use design, you'll be able to quickly and easily replace your old, worn-out valves and get back to enjoying your pool in no time.

【Compatibility】The pool filter pump part compatible with Intex sand filter pump systems. The pool filter o ring compatible with Intex sand filter pump motor 26323CA, 26323EH, 26331CA, 26331EH, 26337EH, 26351EH, 26351W, 26361CA, 26361EH, 26361W, 26371CA, 26371EH, 26381EH, 28643EG, 28645EG, 28647EG, 28651EG, 28946EH, 28948EH.

【The Package Include】This sand filter pump part repair set comes with the following o-ring part numbers : 5×11412. The sand filter o ring parts repair set replacement for Intex part number 11412.

【High Quality】Replacement for intex sand filter o ring made from heavy duty premium materials for durability and performance. Sand pump replacement parts for intex keep the pool filter running smoothly, ensuring that your pool is safe and up and running.

Assembly Kit - Includes 2 plunger valves, 2 adapter B, 4 hose o-rings, and 2 step washers.

Working Compatible - Works with Intex 1500, 2500 and 4000 gallon per hour filtration pumps, Intex saltwater chlorinator and Intex 2000 gallon per hour chlorinator pump combo. Compatible with Intex, Bestway and Coleman etc above ground pools with the same size of outlet/inlet connection.

Multifunctional - One-step solution to on-the-stop, instant filter pump or filter cartridge changes. The plunger valves are easy to turn on/off. It can efficiently and conveniently stop the flow of your pool. Replace your old plunger valves or upgrade to the Intex Plunger Valve system, makes changing hoses and pumps a breeze.