Best Power Combination Disc Belt Sanders in 2026

Includes 24 pieces of 120-grit sandpaper

Designed for use with the WEN 6524 Oscillating Belt and Spindle Sander

Perfect for material removal, resurfacing and more

Two-in-one sanding machine includes both a 1-by-30 inch belt and a 5-inch disc

2.3A motor provides up to 3160 FPM for the belt and 3450 RPM for the disc

Sturdy heavy-duty base prevents walking and wobbling during operation

Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc

Belt tilts anywhere from 0 to 90 degrees

Sturdy cast iron base prevents any heavy vibrations

Product 1: 5-amp variable speed motor goes anywhere from 2000 to 3400 RPM

Product 1: Slower speeds maximize precision while high speeds help with fast material removal

Product 1: Adjustable eye guards include built-in LED lights to keep your workpiece illuminated

Variable speed dial powers the belt anywhere from 1080 to 1800 feet per minute

Auto-tracking belt system requires no tensioning or adjustments.Range of Motion:50°

Pivot the 1/2-by-18-inch belt up to 55 degrees to meet the needs of any project

Product 1: Plane boards up to 6 inches thick and 12.5 inches wide

Product 1: 15A motor generates 20,000 cuts per minute at a 26 feet per minute feed rate

Product 1: Includes two reversible 12.5-inch SK5 blades (model BP122K)

MAINTENANCE-FREE: This sanding belt and disc were directly driven by the motor shaft, you need not adjust the belt tension, and you don't have to change the damaged belt like before

INCREASE EFFICIENCY: The motor direct drive design is 25% more efficient than the traditional design, it can maximize the development of 3/4 HP fully enclosed induction motor, providing quiet but powerful performance

MULTI-ANGLE SANDING: The belt can tilt from 0 to 90 degrees for horizontal and vertical sanding to meet your project, and the driven drum allows for sanding of curved work-pieces, it has a quick sanding belt replacement design & track control function

HIGH EFFICIENCY: This sander meets CSA standards, with heavy-duty construction can extend using life, equipped with an induction motor that supplies the needed power running under load, the motor is 1/3HP, 3.5 Amp, the no load wheel speed is 3450 RPM and belt speed 4480 FPM

MULTI-FUNCTION SANDER: This combo 2"x42" belt sander 6" bench grinder includes a 2-Inch x 42-Inch high-quality metal sanding belt that can be used for general purpose sanding and finishing on most metals, wood, plastics, and other materials

MULTI-ANGLE SANDING: The belt can tilt from 0 to 90 degrees for sanding to meet your project, the belt housing can swivel from horizontal to vertical for sanding long workpieces

POWERFUL MOTOR: The belt and disc sander is directly driven by the motor shaft, 3/4 HP High Power Motor and 3450 RPM Disc Speed provide efficient and stable output

FLEXIBLE BELT: This belt of the benchtop belt sander is 4x36-inch and 80-grit, and it can be placed horizontally or vertically to meet various needs, the cast aluminum worktable can be tilted 0-45 degrees, this makes this machine better suitable for all kinds of woodworking jobs

STABLE DISC: The diameter of the disk is 8-inch, a heavy steel cover is added to prevent the disc from shaking. There is a miter gauge appliable for fixing the angle of the wood, and the cast aluminum work table also can be adjusted

BRUSHLESS MOTOR: This tool has greater runtime and lifetime than its brushed counterparts

INCLUDED ACCESSORIES: A reusable dust bag and 80-grit sanding belt are included to make an all-in-one package

ADJUSTABLE POMMEL: You can move the pommel up to five different positions for maximum ergonomics

🏘️ [7Amp & 3" x 21" Sander] - Jellas Electric Sander is 7Amp and the size is 3" x 21". Variable-speed knob with 6 dials enables you to match the best speed to the application from 120-400rpm.

🏘️ [2 in 1 Function - Bench & Belt Sander] - Jellas belt sander with 2 metal C clamps, it can be turned over and fixed to table, acting as a bench sander, lock-on button will help you free your hand and release stress.

🏘️ [10 Pcs Sanding Belts Gifts] - The belt sanders for woodworking come with 2pcs 40 grits, 2pcs 60 grits, 2pcs 80 grits, 2pcs 120 grits and 2pcs 180 grits aluminum oxide sanding belts, they can save your money, meeting the requirements for your different projects.

Upgraded 3/4HP Powerful Motor: Unlike other belt sanders of the same type in the market which only have a 1/2 HP motor, our benchtop belt sander use a 3/4 HP high power motor that provides up to 3600 rpm and 1800 fpm.

Adjustable Sanding Belt: 2-in-1 belt disc sander includes both a 4×36" belt and a 6×6" disc. Position Adjustable Sanding Belt from 0-90 degrees,tilt the bench sander belt from horizontal to vertical position depending on the needs of your project. Adjustable work table 0-45 degrees with the miter gauge.

Double Dust Exhaust Port and Double Safety Switch: this belt sanders for woodworking has 2 dust exhaust ports, disc and belt separate dust exhaust. Removing the safety lock when not in use ensures safety. Sturdy cast iron base to prevent heavy vibration.

Create beautiful small crafts with this 1 by 30-inch belt, 6-inch disc variable speed sander

Motor is built for efficiency in driving the belt and disc which provides quick stock removal

Variable speed feature lets you dial-in the best belt or disc speed for sanding performance

HIGH POWER - This large 1HP motor delivers superior power for driving the sanding belt and disc without stalling.

BELT AND DISC SANDER - With a 6” x 48” belt and 10” disc this sander from Rikon Tools has the strength and capacity to complete all of the sanding you may need.

TILTING - The disc table for this sander tilts 0-90 degrees allowing precise sanding of even the sharpest angles.

Includes: heavy duty belt and disc sander combination flaunts a 1”x30” sanding belt, 5” sanding disc, 2 work tables with 0° - 45° tilt, heavy duty miter gauge, belt guard, and 2 Dust ports

Features: 2 cast aluminum tables provide exceptional work support and tilts up to 45 degrees, precision tracking system; cast iron base prevents machine from wobbling and walking in use

2-1 design: sanding machine is equipped with both an abrasive Belt and disc Combo, large enough and perfectly sized to handle an assortment of sanding and woodworking applications and can sand hard to reach places easily

[HORIZONTAL & VERTICAL SANDING] The spacious 4” x 36” belt platform raises and lowers from 0-90° to accommodate almost any project

[BEVEL EDGES] The sanding table adjusts from 0-45° for smoothing out beveled edges—you’ll have the nicest picture frames in the business

[HEAVY INDUCTION MOTOR] Powerful 4.3-amp motor provides plenty of power to sand down all your woodworking projects

1/3 HP, 120/240VAC motor, 3.5/1.75 amp, 3500 RPM

2-Inch x 42-Inch Belt speed 4400 SFPM

6-Inch PSA abrasive disc, 3500 RPM

Product 1: Plane boards up to 6 inches thick and 13 inches wide

Product 1: 15A motor generates 30,000 cuts per minute at a 26 feet per minute feed rate

Product 1: Includes three reversible 13-inch SK5 blades (model BP133K)

BENCH BELT SANDER FOR METAL&WOOD: The sanding disc and belt paper is professional for metal polishing, and the sanding disc paper is hook and loop design for easy replacing, the aluminum sanding belt dust outlet can prevent melting, with the knife grinding accessories can be installed on the belt plate and it can be removed when not in use.This machine can be also proceed with wood working

INCREASE EFFICIENCY: The 1HP direct drive motor is more powerful and professional design than the woodworking machine BD4603&BD4801, the motor direct drive design is 25% more efficient than the traditional design, it can maximize the development of 1 HP fully enclosed induction motor, providing constant and powerful performance

MORE CONVENIENT DESIGN: The switch box is placed on the top of the machine, making the operation more convenient, the belt tension is adjustable, the sturdy cast aluminum base with rubber foot prevents vibrations, the dust port can be removed and enlarge work area which is convenient for polishing long materials

Belt & Disc Sander: This combination sander is professional for woodworking, including 1 x 30-inch belt and 5-inch disc, with extra 3pcs 100-Grit belts and 3pcs 80-Grit discs, which can be used for sanding projects on various materials.

Adjustable Easily: The sanding disc work table can be adjusted from 0 to 45 degrees to meet your different angle needs. Using it with a miter gauge is suitable for contour sanding and shaping. Great sanding tools for woodworking and all your DIY needs.

Powerful Sander: The benchtop belt/disc sander is driven by a motor directly, providing 3160FPM of belt speed and 3450 RPM disc speed, which shows a more powerful performance than traditional design.

?Multifunctional Use - With a powerful motor, it can be used for small & large sanding operations on various materials. It can intricate contour sanding and shaping to fast stock removal

?High Quality Material Tool - Disc sander is made of heavy duty steel. Durable and can be used for a long time. There is also a strong base on the disc sander, which can prevent any heavy vibrations when you operate. It provides extra stability and safety

?Convenient and Simple Design - Both belt & disc sanding tables can tilt 45 degrees. It is also equipped with the quick-release belt tension lever, which is easy & quick for you to change the belt. It makes your work more convenient

【Package List】1 x SI FANG Mini Electric Belt Sander, 20Pcs Sanding Belt (330*30mm/13×1.2 inch) Grit 120, 320, 600, 800,1000 each 4pcs, 1 x Dustproof Cover, 1 x Grinding Wheel, 3 x Wrench, 1 x Power Adapter. The mini belt sander also equipped with 7 speed adjustment, you could adjust the speed you need, very convenient.

【A set of multi-purpose】 contains a variety of sets, you can choose abrasive belt or grinding wheel. Installing a grinding wheel or cotton colth wheel turns the mini belt sander into a mini bench grinder. A complete set of functions is more complete, which can be used for drilling holes, grinding wheel grinding, cloth wheel polishing, disc polishing, etc.

【Adjust tightness and verticality】The angle of the worktable of the power belt sander can be adjusted at will, which is convenient to use. Belt knife sharpener has super powerful motor, no-load speed: 4500-9000RPM can grind metal, knife making, wood, acrylic and other materials well. Grinding high hardness materials, efficient and stable, strong and practical.

Combined Belt & Disc Sander: The bench belt sander is combined with a belt sander and a disc sander, and it is easy and quick for you to adjust and change the belt. Belt size: 36" x 4"/915x100 mm, disc size: 6"/150 mm. The belt sander features both horizontal and vertical sanding.

Various Angles Sanding: The 7.4"x5"/188x125 mm sanding tables can tilt 45 degrees. And our machine is equipped with a miter gauge that can achieve 180 degrees accurate sanding.

375W High Efficient Motor: This disc belt sander works well with a high-speed pure copper motor. This copper motor runs smoothly, and the energy consumption is low. Its 375W power provides a no-load speed of 1420 RPM. The safety switch is easy and secure to operate.

Motor: 1/2 HP, 120V, single-phase, 3600 RPM

Belt size: 4" x 36"

Disc size: 6"

5-3/4 inch round cast aluminum table tilts up to 60 degress for bevel sanding

Uses 1 inch wide x 30 inch long sanding belts, Removable belt support platen for finishing intricate or curved work

Belt tracking and tension adjustment keeps belts on rollers and makes belt changes easy

The belt frame adjusts in any position from horizontal to vertical to meet your sanding needs. Both the disc and belt support fences tilt 0-45 degrees for angled work

The precision die-cast metal base offers a sturdy platform while the quick release belt lever and large 8″ diameter PSA sanding disc make changes simple and fast. Both the belt and disc functions include tilting tables for sanding fine, detail and angled work.

Includes Belt/Disc Sander, miter gauge, 80 grit PSA sanding disc and 80 grit sanding belt.

Motor: 1 HP, 110V/220V, prewired 110V, single-phase, 3450 RPM, 14A/7A

Precision-ground cast-iron table

Belt size: 6" x 48"

POWERFUL DIRECT DRIVEN MOTOR: 3/4 HP 5.0A brushless induction motor provides 3150 FPM speed for the belt, and 3450 RPM for the disc, 25% more sanding efficiency than belt driven motor

MAINTAINANCE FREE & EASY ASSEMBLE: Unlike other belt-driven motors that need yearly belt change, the brushless induction motor do not need maintenance, and you only need to install 2 work tables, then the bench belt sander will be ready to work

MADE FOR METALWORKING: From work tables to the machine base, and even the belt frame and dust ports are made of metal, this benchtop belt disc sander is just born for metalworking like knife making and all metal polishing

Versatile Sanding: Large cast iron table has preset stops at 45° and 90°

Less Slippage: Drive drum is rubber coated for a better grip on the sanding belt

Fast Changes: A quick-release belt tension lever for belt changes, and a quick-lock dust cover for disc changes

A perfect match to your bandsaw or scroll saw this Combination Belt/Disc Sander will shape and smooth right to the line. A 1/3-HP TEFC capacitor start

Includes single knob tracking and two 2-Inch dust ports

Approximate shipping weight is 63 lbs