Best Electric Power Nibblers in 2026

Easy and fast to cut 14 gauge material and creates a precision, burr free edge

360 degree double cutting head to cut straight line, curve line and circles

HSS cutting blades to cut including but not limited to: Sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminium, formica, plastic, fibreglass

Country Of Origin: Taiwan, Province Of China

Model Number: 900-215

Item Package Dimension: 11.5" L x 5.0" W x 0.5" H

[Strong Cutting Ability] This metal nibbler drill attachment has a faster cutting speed than other sheet metal cutting tools, suitable for any drill bit working between 1500-3000, easier and more powerful than ordinary scissors and knives, it can save a lot of work time, Improve efficiency.

[Electric Drill Plate Cutter Accessories] With a high hardness cutting head, this nibbler attachment can handle iron sheet(0.2-1mm), white sheet (0.3-1mm), steel sheet(0.2-0.8mm), copper sheet(0.3-1.2mm), aluminum sheet(0.3-1.2mm).

[Easy to Use]: This metal cutter attachment quickly transforms your drill into an electric shear that fits perfectly on the chuck of your drill. And it also comes with an adapter handle, which can adapt to a variety of different electric drills. The drill bit is very compact, easy to store when not in use, perfect for your toolbox or locker and easy to carry.

Package Content: 1 x Double Headed Cutter, 1 x Metal Wrench (2 types, we will send it at random)

Use for: Brass Aluminum Stainless; Overall Size: 18 x 5.1 x 7.8cm / 7" x 2" x 3" (L*W*H)

Cutting Diameter: 7.4mm / 0.3"; Shank Diameter: 27mm / 1.06"

【Compact Design】: The size of the drill attachment, in particular, is designed to be very compact, making this drill attachment easy to store away and perfect to fit into your toolbox or storage cabinet when not in use.

【Electric Drill Plate Cutter】 : Our electric drill plate cutter SAURIAN has a double-headed metal plate cutter, making cutting easier and working faster, allowing you to easily complete a difficult installation job.

【With Superb Performance】 : Our electric drill cutter is suitable for any drill that works between 1500-3000, easier and more powerful than ordinary shears and cutters. It should be used with 8mm electric drill or pneumatic drill.

MAKES THE CUT: IR Edge Series EC300 Air Nibbler cuts through tough materials with the ability to cut up to 18 gauge steel, aluminum, plastic, and other metals in 6' per minute

POWER + PRECISION: Even at 4,200 strokes/min, the EC300 holds a tight 1/4" radius with great accuracy, giving you the control and cutting power you need, without any distorted edges

OPERATOR COMFORT: This tool has an angled head for easy cutting, and features include an ergonomic hand grip, low profile throttle lever, and front exhaust to blow air away from the project

Cutting jobs becomes easier, faster and safer with this double headed sheet metal nibbler, fitting effortlessly into any standard drill. it can glide through material up to 2mm thick or 14 gauge and creates a precision, burr free edge

Easily handle all kinds of materials such as sheet metal, corrugated material, pipes, complex profiles, powder coated material, stainless steel, copper, aluminum, Formica, plastic, fiberglass, even soft materials such as denim, leather, paper or card.

Cut in any direction and follow the profile of the material. gutters, roof sections, Complex shapes or stencils can be cut with precision as it can move anywhere within 360 degrees. The maneuverability of this nibbler over the material makes it an incredibly versatile tool with a wide range of use.

【Sharp and durable】 The nibbler metal cutter is made of high-quality carbon steel, which is durable, sharp and wear-resistant, rust and corrosion resistant, not easy to break and deform, and can be used for a long time.

【Easy to use】You can quickly install the electric drill cutter to your electric drill, insert the electric drill cutter into the electric drill and install the fixed handle to use immediately. With the electric drill shells attachment cutter nibbler, there is no burr, straight cutting and circular cutting. You can cut beautifully and effortlessly. The sheet metal knife cutting is more convenient and fast than the traditional cutter. It is easy to use and saves time and effort.

【Electric drill plate cutter】 This electric drill cutter is applicable to iron sheet, white iron sheet, copper, stee sheet, aluminum and other alloy materials. electric drill shells cannot cut metal plates of mixed, ribbed, deformed or welded shapes or non-metallic materials. If it is stuck and cannot cut forward, set the drill to reverse direction to exit automatically.

INCLUDES: 18V Nibbler along with a 2.5mm and 4mm Hex Bar Wrench

CUTTING: 180 Degree 3 stop die holder allows easy straight, right and left cutting

APPLICATIONS: Cuts and pocket cuts mild steel plate, aluminum plate, stainless steel plate and corrugate with speed

✅【SHARP & DURTABLE】:This metal nibbler drill attachment has a faster cutting speed than other sheet metal cutting tools, suitable for any drill bit working between 1500-3000, easier and more powerful than ordinary scissors and knives, it can save a lot of work time, Improve efficiency.

✅【PRECISE CUTTING】:With a high hardness cutting head, this nibbler attachment can handle iron sheet(0.2-1mm), white sheet (0.3-1mm), steel sheet(0.2-0.8mm), copper sheet(0.3-1.2mm), aluminum sheet(0.3-1.2mm).

✅【WIDE APPLICATION】：The metal nibbler drill attachment board cutting machine is suitable for cutting flat sheet metal less than 1mm. It can not cut sheet metal with blending, ribbed, special-shaped or welded shape or non-metallic material. It can not be cut forward if it gets stuck, set the drill to reverse for automatic exit.

[Powerful cutting ability]The metal nibbling drill attachment runs at high speed with the help of an electric drill and can quickly cut a wide variety of processed alloy materials. It is faster, less laborious, more accurate and easier than other cutting tools, which can save time and improve your work efficiency.

[Electric Drill Shears Metal Cutter]Electric drill plate cutter tool is made of high quality steel, high hardness, sharp and strong, not easy to break deformation, wear resistant, rust and corrosion resistant, can be used for a long time. Small size, compact design, easy to store. Fits perfectly into your toolbox or storage cabinet when not in use.

[Wide range of functions]Electric drill shears attachment cutter nibbler applicable to the market general-purpose electric drill tools, can quickly turn your electric drill into electric shears. Can be used to cut a variety of sheet metal materials, such as iron plate 0.2-1 mm, white iron 0.3-1 mm, steel plate 0.2-0.8 mm, copper plate 0.3-1.2 mm, aluminum plate 0.3-1.2 mm and other alloy materials (can not exceed the corresponding thickness of the metal).

Precise, distortion-free cuts in sheet metal as thick as 18 gauge

Makes radius cuts as tight as 1/4 inch

Paddle throttle lever for precise control

High quality material: This air nibbler is made of high quality alloy case which is of high hardness, not easy to damage. A great choice for you

Application: Used in automotive sheet metal operations, steel plate cutting and a variety of metal cutting operations. You can use it with confidence

Easy to use: Light weight and it is convenient to operate. You do not need complicated procedures that you can use it

⚙️【Cutting Capacity】:---Iron plate: ≤ 1.2mm，Stainless steel plate: ≤ 0.8mm，Copper, aluminum alloy plate: ≤ 1.8mm，Plastic plywood: ≤ 1.8mm（Note :!!! Do not cut more than the required thickness)

⚙️【Material】:High-quality metal products, It can cut a variety of building materials including stainless steel, soft steel plate, soft iron sheet and automobile body panels. Drill requirements are 1/4 in. (6.35 mm) Chuck, Min. 14.4-Volt - DC, Max 7A-AC.

⚙️【HIGH QUALITY】:The cutter head has been subjected to high-frequency heat treatment, and the cutting edge is sharp, which has the advantages of wear resistance and smooth cutting.

Smallest Cut Radius: At only 3/16 inch, allowing clean cuts in tight corners; 2,500 SPM/RPM

"Oversized" Anvil and Punch: Dramatically increases the reliability of these high-wear parts

Rear Exhaust Muffler: 360-degree rotational muffler allows exhaust air to be directed as preferred

Rotating punch - increases the punch life by 30% against fixed punch systems

High cutting speed - 7½ ft/min

Tool-free change of punch, die and cutting direction

Sheet Metal Nibbler Cutter ; Excellent cutting speed by 2 meter per minute with 3000RPM

Mild steel plated up to 1.8mm;Stainless steel plated up to 1.0mm;Copper,aluminum,plastic up to 2.0mm

Best cutting result without any burrs at the cutting edges;360ͦ changeable direction at operation

Power Tools and Accessories

Country of manufacture: China

Manufacturer: Milwaukee

[Strong Cutting Ability]: Dirnatel TS3 Metal cutter tool has a faster cutting speed than other sheet metal cutting tools, powerful than ordinary scissors and knives.

[Usable range]: Sheet metal nibbler With a high hardness cutting head,this nibbler attachment can handle iron sheet,steel sheet,copper sheet,aluminum sheet.

[Easy to Use]: Metal cutter attachment quickly transforms your drill into an electric shear that fits perfectly. with an adapter handle, adapt to a variety of different electric drills.

Mellif cordless electric nibbler compatible with DeWalt 20V Max battery (Battery is NOT included)

TWO CUTTING BLADES can rotate 360 degrees while cutting materials, helping you achieve a variety of different cutting shapes. It can not only cut straight line, but also cut arc (can cut a coin size circle) and other shapes

The sheet metal nibbler features powerful brush-less motor delivering up to 1800RPM cutting speed , efficiently cuts through a variety of materials, such as Steel, Aluminium, Plastic. Steel Sheet: 0.5~1.8mm; Stainless Steel: 0.5~1.0mm, Aluminium: 0.5~2.0mm

【STRONG CUTTING ABILITY】 This kind of metal gnaws cutting machine, cutting speed is faster than other sheet metal cutting tools, suitable for any drill between 1500-3000, more simple and powerful than ordinary scissors and cutting tools, straight or curve can be done, improve work efficiency but also save labor

【PRECISION AND RELIABLE】 The accessory of the metal cutting machine has a positioning slot, which can guide the tight cutting path and help to accurately cut various metal sheets. Smooth cutting allows faster cutting and no rough edges

【WIDE RANGE OF USE 】 This metal tool accessory is equipped with an adapter handle, whether it is special electric drill or general electric drill, can be adapted to greatly improve your use range.

Suitable for various materials - Metal Nibbler Sheet can cut steel, aluminum, plastic or other metals. Steel Sheet: 0.5~1.8mm; Stainless Steel: 0.5~1.2mm.Economical, slim body design for easy gripping and equipped with a tool box for easy carrying.

Cutting Various Shapes - The metal cutting machine can rotate a full 360 degrees while cutting the material. It helps you achieve a wide range of cut shapes.It can not only cut straight line, but also cut arc (can cut a coin size circle) and other shapes.

Excellent cutting performance - The metal nibbler cuts material at a speed of 1700 rpm without sparking and leaving a burr-free cutting edge.

Handy, powerful nibbler for easily cutting flat and shaped sheet metal

Good curve mobility for notches and inside cut-outs from a radius of 40 mm

Fast adjustment of the cutting direction up to 360-degrees in 45-degree steps without the use of tools

This new modified metal cutter tool can help you cut metal sheets and plates easily. Just install the protable metal cutting tool to an electric drill to save your money and time.

The electric drill metal plate cutter is lighter, more portable, and also easier to store compared to common electric metal plate cutters.

Great for cutting a variety of metal sheets and plates. This sheet metal cutter drill attachment has a maximum cutting capacity: iron or tin sheet 0.3-1.2mm.

【Easy To Use】Metal Nibbler, It can be attached to power drill so it turns your power drill into a power shear

【Quick Connect】Metal Sheet Cutter, Quickly attaches to a minimum 1200 RPM, with 12V cordless or A/C drill

【Wide Range Of Applications】Nibbler Metal Cutter, Suitable for the cutting of iron plate, stainless steel plate, alloy plate and plastic plywood

Up to 1.2mm thickness

Precision heat treated gearing

Free Speed: 3,000 Strokes per minute

【Electric Drill Plate Cutter】： Electric drill plate cutter is made of premium steel and iron, Our electric drill plate cutter has a double-headed metal plate cutter, strong and durable, sharp and sturdy, not easy to break and deform, wear resistant, making cutting easier and working faster, allowing you to easily complete a difficult installation job，Use With Confidence, Save Energy, Increase Efficiency, Great For Cutting a Variety Of Materials，and can be used for a long time.

【Cutting Ability】： It can quickly cut 25GA (0.5mm) stainless steel, 22GA (0.7mm) iron, copper, aluminum, metal mesh, and even 19GA (1.0mm) plastic board, FRP fiber, PVC board, cardboard and other hard plates. The larger the material, the easier it is to use.

【Accurate and Precise】： Metal sheet cutter has positioning groove that can reach precise size and help you cut various metal parts accurately. It is easy to use, with double headed and fast cutting speed, saving your time and labor.Features a positioning slot for accurate sizing to complete a wide range of metal pieces such as iron.

[High quality material and high performance] This drill disc tool is made of high quality material. It has good wear resistance and high hardness, so service life is . The electric drill cutting machine can cut 0.8mm thick metal plate, which is more labor-saving and faster than ordinary shear and cutting machines.

[Compatible with most drill bits] This metal plate tool is compatible with most electric hand drills, lithium electric drills and impact drills to better meet your needs. If you have any questions about the adjusted model, you can contact us.

[Wide application] The electric drill board cutting machine is suitable for cutting metal plates (iron sheet 0.2-1mm, white sheet 0.3-1mm, steel plate 0.2-0.8mm, copper sheet 0.3-1.2mm, aluminum sheet 0.3-1.2mm), materials, pipes, composite profiles, coating materials, glass fiber, etc.

★ [High-quality material]: 100% new air shears are made of high-quality materials, durable, meet strict quality control standards, and are reliable to use.

★ [High quality]: The alloy shell has high hardness and is not easy to damage. The blade is tempered and has a long service life. Strong cutting ability and stable operation

★ [Super cutting: speed 2800rpm/min, cutting capacity: 1mm (steel plate, aluminum plate, stainless steel plate, barbed wire), working pressure is 8kg

【Faster & Safer】Cutting jobs becomes easier, faster and safer with this double headed sheet metal nibbler, fitting effortlessly into any standard drill

【Function】This metal sheet nibbler can be widely used for house maintenance, car repair, HVAC vent pipe, pipes, powder-coated material, plastic, stainless steel, aluminum, copper, and other metal sheets cutting

【Powerful Tool】The 360-degree adjustable cutting blade guide can cut straight lines, curves and circles in any direction. This is a powerful tool that makes cutting jobs easier and greatly saves your time and energy