Best Vevor Printer Cutters in 2026

Made from tungsten steel. Fit for most vinyl cutter such as Roland ,Cricut.

Degree: 45 degrees. Apply in reflective film, automotive film, self-adhesive paper or papers on the cutting plotter. please check the size before order.

Total Length: 23.3mm diameter: 1.96mm

Good Quality: The deburring tool blades are made of High Speed Steel, very sharp. The blades move smoothly, powerful and wear resistant. The blades move smoothly. The life of these blades is 80% more than normal blades.

Metal Hand Engineer: Small handy deburrer, comfortable to hold. It is quite easy but stable enough. It could be flexibly rotated 360 degrees and simply for deburring.

Easy to Use: The blade can be turned very smoothly and the changing mechanism is practical. The spare blades can be plugged into the deburring tool itself, very comfortable.

Two fully adjustable pinch-rollers allow you to use a flexible range of materials.

Vinyl rolls, transfer tapes, magnetic blanks, knife, squeegee, Lifetime phone support.

Roland compatible blade holder gives you access to the most economical blades available.

WIDELY APPLICATION - The micro wire cutter can be used to cut copper wire and aluminum wire≤4mm²; iron wire of Φ≤1mm, PCB board, zip tie, plastic burrs, jewelry craft, soft copper wire, soft iron wire, etc, not for steel wires.

SHARP CUTTING - The Fine Wire Side Cutter is made of carbon steel, not easy to oxidize and rust, has high hardness HRC51-53, sharp edge, neat cut, and is not easy to break, providing longer service life.

PORTABLE & LABOR-SAVING - Mini wire snip is ideal for working in small spaces and helps you to save force, depending on the sharp bevel design, and mini side cutters are small and portable. Ergonomic PVC handle, soft and non-slip, reduces fatigue and is suitable for long-time work.

Standard Blade for cutting color adhesive media -standard vinyl.

Compatible with Roland, Refine, Rabbit(HX) ,

Suitable for cutting media up to 0.25mm thick

★Compatibility: Compatible with Graphtec CB09 CB09U, can be ideal replacement for Silhouette cameo (1/2/3)/portrait /curio and Graphtec 6000/CE 5000 -60 Plotter.

★Blade: 6*30 degree cutter blade (Yellow Cap), 6*45 degree cutter blade (Red Cap), 6*60 degree cutter blade (Blue Cap).

★Application: 30 degree blade should be recommended for fabric, thin cardboard and leather, 45 degree blade used for most general purpose cuts, 60 degree blade does the most intricate and delicate cuts.

1.Including 15pcs Cutting Blades, 5 pcs 45 degree,5 pcs 60 degree,5 pcs 30 degree. Compatible with CB09 CB09U Graphtec Cutting Blade Holder

2. The Blade Holder is Made of carbide materials, ultra-hardness, super toughness, more wear and edge grinding wheel with ultrafine polishing, edge sharper.

3. The Hard Alloy Cutter Blades are with fine polishing process, suitable for mahogany, wood, PVC color board, MDF and other precision relief.

SC2 VINYL CUTTER includes a stand and catch basket for protecting cut jobs. Improved model is faster, quieter, with more memory for larger cut files.

START A HOME-BASED BUSINESS IN THE SIGN INDUSTRY. Bring graphics production needs in-house. Create custom wall signs, banners and graphics for events and promotions!

VERSATILE AND DURABLE. 3 fully adjustable pinch-rollers. Adjustable speed and pressure. Superior ball-bearing dual roller system for feeding vinyl.

✅ WIDE APPLICATION SET - GCC Vinyl Cutter Plotter Blade Adjustable Holder with 15pcs Blades (30 ° / 45 ° / 60 ° 5pcs each) fits GCC, Roland and most cutting plotter.

✅ HIGH PRECISION BLADES KIT - Blades offset value 0.25 mm. Come with a adjustable auminum alloy holder for best performance with high precision and high quality.

✅ HIGH HARDNESS MATERIAL - Made of tungsten cemented carbide. Hgher hardness tip (HRA92.6) provides greater strength, sharper and faster cut for cutting, lettering and plotting.

✅Sharp and Strong: The jaws of the wire cutters are specially heat-treated, made of high-quality stainless steel, and have an angled head design. CANNOT cut steel wires.

✅Professional Flush Cut Pliers: Apply to electrical work, jewelry making，repair needs, 3D printing and daily use.suitable for shearing copper and soft wire under 14 AWG (1.6mm),  up to 20 AWG（0.8mm).

✅Comfortable Design With 0pen Spring: The ergonomic non-slip handle is comfortable to use, and the ideally size is suitable for working in small spaces to save force and reduce fatigue.

TRUSTED PERFORMANCE. USCutter MH Series is high quality vinyl cutter trusted for over 10 years. Max Pressure: 350g, Max Cut Width: 10 ins, Max Cut Length: 8ft

START A HOME-BASED BUSINESS. Make graphics for your community, or bring your signage production needs in-house. Signs, banners, decals, heat transfer for apparel.

VERSATILE AND DURABLE. 2 fully adjustable pinch-rollers. Adjustable speed and pressure. Large digital control panel

HIGH QUALITY: This plotter blades are adopted tungsten carbide material which is of high hardness and toughness, offering long service life.

MULTIPLE USES: The standard blades can be used for cutting color adhesive media standard vinyl, which is also great for polishing wood, PVC mahogany color or other relief.

PROFESSIONAL: Comes with a holder, it has best performance with high precision and high quality which is a professional tool for cutting.

Sharp and Hard - The cutter head is made of Tungsten steel. This knife pen has much higher hardness than common metal blade. It can engrave words on metal and glass.

Durable - Advanced Tungsten blade is wear resistance and no rusting, lasts up to 7 times longer than common metal blades.

Refillable Knife Refill - Replacing the blade is as simple as replacing frequently-used refill. We supply refills for good prices and convenient purchasing.

Brand by AOMAG! Compatible with: Graphtec CB09U CB09

Suitable for standard Graphtec blades 19mm (Length) x 0.9mm (Diameter)

Aluminum-precision Vertical Adjustment

【CUTTING CAPACITY】- 34-inch vinyl cutter with the maximum paper feed of 870 mm (34.3"), the maximum cutting width of 780 mm (30.7"), cutting precision of +/-0.01 mm (0.0004"), and paper feed precision of 3 m (118").

【U-DISK OFFLINE OPERATION】- Support offline control and can be programmed directly by inserting U Disk. The vinyl machine adopts an ARM motherboard and 16 MB high-speed cache memory. Two double-spring pinch rollers and an aluminum knurling stick ensure that the paper feed will not deviate by long distance.

【DIGITAL PRECISE CONTROL】 - The plotter cutter vinyl comes with an illuminated LCD screen and a large control panel. With cutting pressure 10-500g adjustable, and cutting speed 10-800 mm/s adjustable.

Efficient Digital Control: The max feed width: 28.3 in / 720 mm ; the max cutting width: 24.8 in / 630 mm. This Vinyl cutter machine is equipped with an LCD to control speed and force quickly. Besides, the three adjustable double-spring pinch rollers and aluminum knurled rods ensure the vinyl plotter feeding paper steadily without paper jam.

Precise Scale: The vinyl cutter is consists of two replaceable blades and a precise dividing ruler, The cutting precision: ±0.004 in / ±0.01 mm. It can meet your requirements with superior sharpness and correct the size clearly. Our plotter cutter also has a press roller to improve the level of feeding paper.

High Compatibility & Security: This plotter cutter vinyl includes the signmaster software that works with most versions of Windows via USB or serial port. It also supports other software such as signcut and flexi. There is power with fuse possesses of emergency stop function to prevent you from the danger.

[WORKING CAPACITY]- This 53 inch vinyl cutter with maximum paper feed of 1350 mm (53.1 inch). Maximum cutting width: 1260 mm (49.6 inch)

[FLEXIBLE CUTTING] - Plotter machine cutter pressure: 10-500g. Cutting speed: 10-800 mm per second. Both adjustable

[HUMANIZED DESIGN] - Backlight LCD display for easier handling the working process of sign cutting machine. Emergency stop/start function allows stop and restart

Cut and chamfer all common domestic plastic drain pipes up to Ø 50 mm in a single operation

Reversible high-quality ball-bearing steel blade, can be easily replaced without tools

Clean cut: no readjusting or deburring required, reducing potential blockages or damages of the seals

Compass circle cutter

Dia. 2 - 15cm (0.79 - 5.90")

# of blade included: 5

Compact and comfortable design: The non-slip handle provides a comfortable grip, compact meter with open spring, and is ideal for working in tight spaces and saving effort.

Specifications: Micro shear pliers have 0.3-inch-long jaws, a total weight of 50 grams, 5 inches in length, small size, easy to carry on the go.

Sharp and durable jaws: YITONGDA's precision wire cutters are made of 2.2 mm thick high-quality carbon steel with special heat-treated jaws and a bevelled head design. The blades are sharp and aligned for a clean and flush cut.

Blade holder for roland cutting blade

Fits Roland cutting blade

Durable and practical, no rust and anti-static

Made in Cemented Carbide.

Compatible with Roland, Refine, Rabbit(HX)

Standard Blade for cutting color adhesive media -standard vinyl.

QUIET, FAST, PRECISE SERVO MOTOR. 750g max downforce pressure. 37 in/sec cutting speed.

QUALITY ENGINEERING. Aluminum metal frame and internal components. High quality pinch rollers and grit rollers for accurate tracking. Laser-guided print & cut contour cutting for stickers, labels, and printed heat transfer.

PROTECT YOUR CUT JOBS with free included media catch basket. Free included stand.

【Safety Package Design】Each of our spare blades has a protective cover, which can prevent the package from being scratched during transportation. when installed or accidentally dropped to the ground Cap can also protect your body or prevents the blade from wearing when it is not in use

【Cutting Sharp & Smoothy】Our replacement cutting blade is made of high-quality cemented carbide, with high hardness and high sharpness, strong and durable, not easy to rust, and long service life

【Cutting Material】The 45-degree blade is the standard blade used for most conventional cutting. It is the current mainstream cutting blade for lettering. Suitable cutting materials: paper, vinyl, self-adhesive labels, color adhesive media and standard vinyl

IMPORTANT NOTE: There's 2 item condition "Orignial Refurbished" or "COMPATIBLE NEW"send by random. Please do not order if you mind about this.

NOTE - Carefuly check item appearance, size, color and compare with your original item before place your order to make sure it fit your machine.

Model number just for reference, Please do not order if item does not look like your original part or partnumber is not the same.

LASERPOINT 3 VINYL CUTTER. A vinyl cutter with ARMS automatic contour cutting and other advanced features found on cutters costing much more! Improved model is faster and quieter. Comes with a stand and catch basket for protecting cut jobs.

START A HOME-BASED BUSINESS IN THE FASHION INDUSTRY. Bring graphics production needs in-house. Create apparel for events and promotions! Use included sign vinyl, transfer tape, and tools to get started.

VERSATILE AND DURABLE. 3 fully adjustable pinch-rollers. Adjustable speed and pressure. Superior ball-bearing dual roller system for feeding vinyl.

Mac / Windows Compatible

12 Month Warranty

12 month subscription to Sign Cut Pro software with helpful online support and video tutorials showing you how to use the software with your cutter, ideal if this is your first time using a vinyl cutter

QUALITY ENGINEERING. Aluminum metal frame and internal components. High quality pinch rollers and grit rollers for accurate tracking. Laser-guided print & cut contour cutting for stickers, labels, and printed heat transfer.

DURABLE AND RELIABLE. Powerful stepper motor cuts vinyl, cardstock, sandblast, stencil, and much more. 510g of max downforce. 31.5 in/s cutting speed.

PROTECT YOUR CUT JOBS with free included media catch basket. Free included stand.

Comes with:

x1 Silhouette electronic cutting tool plus accessories

x1 9in x 6ft transfer tape - BONUS!

POJAN parts

CQ890-67091

Copper gear fix Cutter Assembly