Best Printmaking Squeegees in 2026

【17 Pieces Multiple Combination for Use】Our set contains 2 angled chalk pain squeegee, 6 mini squeegees, 3 large squeegees, 5 stir sticks and 1 rubber pen for detail painting, total 17 pieces set. It is convenient to apply different color pastes with no worry of mixing them.

【Standard Size】Angled squeggees have different size for each side for various painting needs, mini squeegee is squeegee is 1.97 x 1.18 x 0.2 inch/5 x 3 x 0.5 cm, Large squeegee is 2.4 x1.6 x 0.2 inch/6 x 4 x 0.4 cm, Rubber Pen is 6.5 inch/16.5 cm total length with 3mm pen tip and 38 X 2 mm scraper tail.

【Application】The rubber squeegee is one kind of tool that applied the chalk paste or ink on transfer to make it leak to the substrate for DIY hand printing, which has good abrasion resistance and durability, make your DIY hand printing process easier.

Size(approx): The large one: 9.4 inch (24 cm) in length, 4.3 inches(11 cm) in width; the small one: 5.9 inch(15 cm) in length, 4.3 inch(11 cm) in width

Material: Made of rubber blade and wooden handle

Suitable Durometer: 75 Durometer screen printing squeegees, suitable for conventional screen printing

Quantity and Sizes: You will receive 2 different sizes (9.4 and 5.9 inches) of screen printing squeegees, which easily adapt to different size frames and printing patterns.

Corrosion and Wear Resistance: The handle with a comfortable grip shape is made of hardwood, which has been well polished without chipping effect. The blade with well defined smooth edges is made of polyurethane and has a moderate durometer of 75, which can meet most screen printing.

Comfortable and Flexible: The wooden handle has an ergonomic shape for comfort and maximum control and the quality polyurethane blade is very smooth when running the ink across the screen, and the combination of the two can transfer ink to the substrate cleanly and conveniently.

Size(approx): The wooden scraper has 3 sizes, 13.7 x 11 inch, 9.4 x 4.3 inch, 5.9 x 4.3 inch. The plastic scraper has 3 sizes, 6.8 x 4.5 inch, 3.7 x 3.3 inch, 5.1 x 2.3 inch

Material: The wooden ink scrapers are made of rubber blade and wooden handle. The plastic ink scrapers are made of plastic, non-toxic

6 Different sizes: You can choose the right size of the screen printing squeegee according to the size of the design, really convenient for you

➤𝐏𝐀𝐑𝐀𝐌𝐄𝐓𝐄𝐑:18 inch(45cm)long Squeegee;5.2 inch wide,75 Durometer,Screen Printing Water Squeegees.

➤𝐏𝐑𝐄𝐌𝐈𝐔𝐌 𝐌𝐀𝐓𝐄𝐑𝐈𝐀𝐋:Blades are molded under high heat and pressure and have a tensile strength of more than 2,000 lbs. This eliminates ink streaking and provides a superior long-lasting printing edge.The handle with a comfortable grip shape is made of hardwood, which has been well polished without chipping effect. The blade with well defined smooth edges is made of polyurethane ,durometer of 65 ,which can meet most screen printing.

➤𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍 𝐒𝐂𝐄𝐍𝐀𝐑𝐈𝐎𝐒:Squeegee is also called scraper, it is one kind of tool that used to scratch the ink on the screen to make it leak to the substrate. Squeegee is made by the combination of scratching strip and handle, rubber blade is inserted into the wood handle and stapled in position, then professionally sharpened after assembly.

Size - each mini screen printing squeegee measure about 5x3x0.5cm/2x1.2x0.2inch (LxWxH), inclined at 45 degrees and small and lightweight design, proper size of silk paint squeegee for you to carry and daily use.

Material - these mini screen printing squeegees made of premium quality rubber, durable, reusable and soft feeling, you can wash our mini rubber squeegees cause the steady color and will not be faded out easily.

Value package - you will get 15 pieces mini squeegees screen stencil printing squeegee silk printing squeegees rubber screen printing squeegees chalk paste transfer squeegees, enough quantity can nicely satisfy your various craft needs.

Extra Long — This 4” x 1.5” long squeegee covers more surface area with each stroke. Other mini squeegees limit you to small projects. The elongated rubber edge of this squeegee spreads printmaking ink wider, helping you finish your project faster, whether it's a custom stencil or t-shirt graphic

All Silicone Flexibility — This silk screen squeegee is made of soft silicone material and contains no BPA. This allows for the extra flexibility needed when working with large letter stencils and bigger designs. The tapered edge gives you precision for more detailed areas

Enhance Your DIY Experience — Art is therapeutic. Your DIY silk screen designs help boost your self-esteem. Explore avenues of your unique creative expression with this handy screenprinting squeegee to help you

➤𝐏𝐀𝐑𝐀𝐌𝐄𝐓𝐄𝐑:18 inch(45cm)long Squeegee;5.2 inch wide,65 Durometer,Screen Printing Water Squeegees.

➤𝐏𝐑𝐄𝐌𝐈𝐔𝐌 𝐌𝐀𝐓𝐄𝐑𝐈𝐀𝐋:Blades are molded under high heat and pressure and have a tensile strength of more than 2,000 lbs. This eliminates ink streaking and provides a superior long-lasting printing edge.The handle with a comfortable grip shape is made of hardwood, which has been well polished without chipping effect. The blade with well defined smooth edges is made of polyurethane ,durometer of 65 ,which can meet most screen printing.

➤𝐀𝐏𝐏𝐋𝐈𝐂𝐀𝐓𝐈𝐎𝐍 𝐒𝐂𝐄𝐍𝐀𝐑𝐈𝐎𝐒:Squeegee is also called scraper, it is one kind of tool that used to scratch the ink on the screen to make it leak to the substrate. Squeegee is made by the combination of scratching strip and handle, rubber blade is inserted into the wood handle and stapled in position, then professionally sharpened after assembly. Use for both graphic and textile applications, for all hand printing and many machine applications.

6FT - 72" Silk Screen Printing Squeegee Blade - 60 DURO - Polyurethane Rubber

Squeegee durometer is the squeegee "hardness" that determines the amount of pressure required to push ink through mesh. In general, soft Squeegees leave a thicker ink deposit, while hard squeegees deposit a thinner amount.

60 durometer is the softest and leaves a minimal ink deposit, its great for very thin ink and water based inks

Package Included: 3 kinds of squeegee size, 5.9inch, 9.4inch and 13.7 inch

75 Durometer screen printing squeegees silk: The shape of the knife edge is flat, and the hardness of the rubber strip is 75 degrees, which can meet most of the silk screen requirements.

Sturdy and durable: The rubber blade is tightly attached to the wooden handle,excellent abrasion and solvent resistance, it can be reused many times

This rack is used for placing squeegee and scraper, it can hold 6 pieces squeegees at the same time.

Non-Slip Design: There are non-slip mats installed at the bottom of the rack, and it can be put on any platform stably. The installation is simple, you only need to fix a few screws to complete the installation and put into use.

Easy to adjust: The shelf can be stretched from left to right and front to back. It can hold a squeegee with a minimum size of 8cm (3 inch); a squeegee with a maximum size of 20cm (8inch). You can adjust to fit different sized squeegees according to your needs.

13FT - 157" Silk Screen Printing Squeegee Blade - 70 DURO - Polyurethane Rubber

Material:Polyurethane,Color:Red(default);Size:50mm x 9mm x 13FT(157"),Shore hardness:70 Duro

A squeegee should always be wiped clean and dry following removal from the press and stored in a dry environment at room temperature.

70 Durometer screen printing squeegees

Size: 3 kinds of squeegee size, 5.9inch, 9.4inch and 13.7 inch

Material: Made of rubber blade and wooden handle

Squeegee durometer is the squeegee "hardness" that determines the amount of pressure required to push ink through mesh. In general, soft Squeegees leave a thicker ink deposit, while hard squeegees deposit a thinner amount.

Color: Yellow, Size：50mm x 9mm x 6FT（ 72"）/Roll, Gross Weight: 1.07kg, Packing Size: 20 x 19.2 x 6.2 cm

The best solvent resistance. The highest wear resistance.

【Size】: 2 screen printing squeegees, 5.9 inch（14.98CM） and 9.4 inch（23.88CM） .

【Material】: The wooden ink squeegee (scarper) made of rubber blade (75 durometer) and wooden handle. The rubber blade is 0.27 inches thick, which makes the screen printing squeegee durable, resistant to corrosion and chemical solvents, and the finely polished wooden handle and curved design give you a comfortable using experience.

【Function】: Screen squeegee is one of the important screen printing supplies in the screen printing process, it allows the ink to pass through the screen and make contact with the print design, and also removes the excess ink from the screen.

✅【Soft and durable material】 Standard squeegee, screen printing stencil squeegee and rubber pen are made of high quality rubber, soft to touch, washable, reusable, non-toxic and safe. Firm grip, stable color, not easy to fade, can be used for a long time

✅ 【Standard size】Standard squeegee: each screen printing squeegee is about 2.56×1.77×0.2 inches, small and lightweight, suitable for you to carry and use, quantity: 6pcs/pack

✅ 【Package】You will get 6 standard squeegees, convenient for you to apply different colors of paste without worrying about mixing

✅【𝐋𝐚𝐫𝐠𝐞 𝐂𝐚𝐩𝐚𝐜𝐢𝐭𝐲】The rack is used for placing squeegee and scraper,it can place 10 pieces squeegees and 5 pieces scrapers at the same time. You can also place other tools according to its space.

✅【𝐒𝐭𝐚𝐛𝐥𝐞 𝐚𝐧𝐝 𝐍𝐨𝐧-𝐬𝐥𝐢𝐩】 The special triangular design is stable and does not deform. There are non-slip mats installed at the bottom of the rack, and it can be put on any platform stably.

✅【𝐏𝐫𝐞𝐦𝐢𝐮𝐦 𝐌𝐚𝐭𝐞𝐫𝐢𝐚𝐥】The machine adopts full metal structure and all parts are made of high quality material. It adopts advanced electrostatic spraying process, which is resistant to ink or other chemicals, easy to clean, does not rust, and has a long service life.

Package Include: 2 pieces 2 sizes screen printing squeegee and 6 pieces 3 sizes wood silk screen printing frame

Size(approx): Printing Squeegee-The large one: 9.4 inch (24 cm) in length, 4.3 inches(11 cm) in width; the small one: 5.9 inch(15 cm) in length, 4.3 inch(11 cm) in width. Printing Frame-10 x 14 inch, 8 x 12 inch and 6 x 10 inch, the thickness is 0.8 inch (approx)

Sturdy and durable: The rubber blade is tightly attached to the wooden handle,excellent abrasion and solvent resistance, it can be reused many times

Package Include: 3 kinds of squeegee size, 5.9inch, 9.4inch and 13.7 inch and 3pc 20 X 24 inch aluminum screen printing frames with 160 white mesh

Material: Made of rubber blade and wooden handle, 75 Durometer screen printing squeegees silk, excellent abrasion. Screen printing frame is made of Aluminum and 160 white mesh silk

Size(approx.): The aluminum screen frame outside size is 20 x 24 inch, the inner screen size is 17.3 x 21.2 inch, the height of the screen is 0.78 inch

Package Include: 3 kinds of squeegee size, 5.9inch, 9.4inch and 13.7 inch and 6pcs 20 x 24 inch aluminum screen printing frames with 160 white mesh

Material: Made of rubber blade and wooden handle, 75 Durometer screen printing squeegees silk, excellent abrasion. Screen printing frame is made of Aluminum and 160 white mesh silk

Size(approx.): The aluminum screen frame outside size is 20 x 24 inch, the height of the screen is 0.78 inch, meet your different pattern design and application

Package Include: 3 kinds of squeegee size, 5.9inch, 9.4inch and 13.7 inch and 2pcs 10 x 14 Inch aluminum screen printing frame with 110 white mesh

Material: Made of rubber blade and wooden handle, 75 Durometer screen printing squeegees silk, excellent abrasion. Screen printing frame is made of Aluminum

Size(approx.): The inner screen size is 10 x 14 inch, the height is 0.7 inch

Package included: 1 X 13.7 inch (35 cm) Screen Printing Squeegee + 1 X 9.4 inch (24 cm) Screen Printing Squeegee ＋1 X 5.9 inch (15 cm) Screen Printing Squeegee

High-quality Materials: Our 70 Durometer Screen Printing Squeegees Are Made With A High-quality Rubber Blade And A Sturdy Wooden Handle, Ensuring Durability And Long-lasting Use.

Versatile Sizes: With Three Different Sizes Available (5.9inch, 9.4inch, And 13.7inch), You Can Choose The Perfect Size For Your Specific Design Needs.