Best White Quilting Ruler Racks in 2026

Features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 inch and 1/4 inch increments

Use the black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances.

Use the patented Turn-A-Round feature to add the 1/2 inch seam allowance.

This 6-1/2 x 12-1/2 inch rectangle ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches.

The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.

Use the white 45 degree angle to trim half-square triangles in whole inch increments. Use the black 45 degree angle to trim half-square triangles in half inch increments. An additional black 45 degree line is placed so that two angles cross 1/4 inch away from the outside edge.

Sturdy storage solution for rulers & templates

Keeps rulers & templates organized, within easy reach and off of your work surface

10 separate slots accommodate 1/8"+H104 in (3.17 mm) thick rulers

This 4-1/2 x 8-1/2 inch rectangle ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances.

Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance. Use the white 45 degree angle to trim half-square triangles in whole inch increments.

Use the black 45 degree angle to trim half-square triangles in half inch increments. An additional black 45 degree line is placed so that two angles cross 1/4 inch away from the outside edge. Use these markings to square up flying geese units; squares set on point or mark cross-hatching.

This 5-1/2 inch square features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches.

The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.

A 45 degree angle is printed in black and is used to trim half-square triangles to size. White horizontal and vertical lines are printed on the square so the center of the ruler is easily distinguishable. Use these lines to square up blocks based on four-patches or embroidered and appliqued blocks.

This 4-1/2 inch square is the perfect companion for anyone who loves to work with the 5 inch pre-cuts on the market. The diagonal line makes trimming half-square triangles created with these 5 inch squares a piece of cake.

It features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and ¼ inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances.

Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance. A 45 degree angle is printed in black and is used to trim half-square triangles to size.

This 6-1/2 inch x 24-1/2 inch rectangle ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 inch and 1/4 inch increments.

Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances.

Use the patented Turn-A-Round feature designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides to add the 1/2 inch seam allowance.

This 15-1/2 inch square features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments.

Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances.

Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.

Creative Grid are premium acrylic quilt rulers made in the USA. Sold Individually.

This 8-1/2 inch x 24-1/2 inch rectangle ruler features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 inch and 1/4 inch increments.

Package includes (1) heavy duty EZ quilting ruler

Ruler measures 6.5" W x 24" L and is made from sturdy acrylic

Features 1/4 inch seam allowance marked on all 4 sides at 3/8, 5/8, and 7/8 inch intervals, as well as 45 and 60 degree angles

Angela Walters, machine quilting author and teacher, designed Slim with you in mind!

Black and White dashed guide lines are visible on all fabric colors

Curved edges create versatile designs

This 2-1/2 inch square is the perfect companion for anyone who loves to work with the 2-1/2 inch pre-cuts on the market. It features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments.

Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches. The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances.

Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.

This 6-1/2 inch square features easy-to-read black and white markings printed in 1 inch grids marked in 1/8 and 1/4 inch increments. Use the easy-to-read, black numbers (printed on white dots) and the 1/4 inch grip sides to cut whole inches.

The 1/4 inch dashed lines printed on two adjoining sides aid in trimming seam allowances. Use the patented Turn-A-Round feature – designated by the easy to read, numerical white numbers (printed on black dots) and the 1/2 inch grip sides – to add the 1/2 inch seam allowance.

A 45 degree angle is printed in black and is used to trim half-square triangles to size. White horizontal and vertical lines are printed on the square so the center of the ruler is easily distinguishable. Use these lines to square up blocks based on four-patches or embroidered and appliqued blocks.

Inspired by the dome of the Taj Mahal, Taj is perfect for quilting curvy, pointed arcs on your quilts. This versatile tool can be used in all areas of your quilt, including borders, blocks and backgrounds. Designed by machine quilting teacher and author, Angela Walters, this tool does double duty!

Black and white dashed guide lines are visible on all fabric colors

Palm-sized tool allows maximum control, preventing broken needles and crooked lines

Cut 30 and 60 degree angles up to a finished height of 8 inches. This 60 degree equilateral triangle features easy to read black and white markings. A 1/4 inch dashed line is printed on each side of the center vertical line so you can cut 30 degree triangles that include the seam allowance.

The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!

The ruler comes with fully illustrated step by step instructions or scan the QR Code printed on the ruler to view a video demonstration of these features.

This multi-sized ruler features two triangles in one. Use the 45 degree side to cut half-square triangles from strips up to 5-1/2 inches wide, creating half-square triangles up to a finished size of 5 inches.

Use the 90 degree side to cut quarter triangles that finish up to a 5 inch finished quarter-square triangle. The math required to cut these angles is incorporated into the easy to read black and white markings.

The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!

The Quick Trim and Circle Ruler is available in two sizes – 3-1/2 x 12-1/2 inches (Item CGRMT1) and 4-1/2 x 24-1/2 inches (Item CGRMT5). Both rulers include the Turn-a-Round feature as well as all of the markings of a traditional Creative Grids ruler.

White 45 degree angle lines that cross at the 1/4 inch line, are printed on both sides of the ruler. Use these lines to cut binding and border strips perfectly as well as cut and trim flying geese units.

Use the holes drilled in the center to draw circles up to 22 inches using the smaller ruler and up to 46 inches using the larger ruler.

Meet Elvira, your new favorite curvy tool! She not only looks beautiful, she’s quite handy when quilting wavy lines or continuous curve lines.

Black and white dashed guide lines are visible on all fabric colors

Designed to fit in the palm of your hand, it is easy to manipulate and control

Creative Grids Shelly is your new quilting best friend!

Quilt the same sized Clamshell design from either side of the ruler. You don't have to rotate the quilt and you can quilt from any side of your quilting foot.

Or give Clamshell a modern update by flipping it around to create Orange Peel. Or rotate to create beautiful flower motifs

Use the horizontal, vertical, and diagonal markings to square up any block – up to a 12-1/2 inch square. Use these lines to center and trim embroidery designs, applique blocks, and even fussy cut T-Shirts for T-Shirt quilts. (Fussy cutting is choosing a specific design in the fabric to showcase in your project.)

The drilled holes at 1-1/2 to 11-1/2 inch increments, make it possible to square up, mark and add the seam allowance to any block. To fussy cut, center a fabric design in the 1 – 12 inch printed black solid squares. Mark the fabric through the drilled holes to add the seam allowance to your fussy cut piece - marked with a white dashed line on the ruler. Simply connect the dots and cut to size.

The ruler slides easily over the fabric until pressure is applied. Then, our exclusive gripper holds the fabric in place while cutting, eliminating slipping and miss-cuts!

USA MADE 5 PIECE NON-SLIP SQUARE UP SET – Includes 2½", 4½", 6½", 8½", and 10½" non-slip square up rulers with easy-to-see blue and white translucent markings.

SPINABOUT – Use our SpinAbout feature to spin the ruler around 180°, allowing you to easily add a ½ inch seam allowance to your cut pieces.

EASY FABRIC POSITIONING – Dual colored for use on light and dark fabrics with exclusive invisiline windows allow you to see the edge of your fabric for easy alignment.

Use the horizontal, vertical, and diagonal markings to square up any block – up to a 6-1/2 inch square. Use these lines to center and trim embroidery designs, applique blocks, and even fussy cut T-Shirts for T-Shirt quilts.

The drilled holes at 1-1/2 to 5-1/2 inch increments, make it possible to square up, mark and add the seam allowance to any block. To fussy cut, center a fabric design in the 1 inch – 6 inch printed black solid squares. Mark the fabric through the drilled holes to add the seam allowance to your fussy cut piece - marked with a white dashed line on the ruler. Simply connect the dots and cut to size.

Made In the USA

Creative Grids grip to ensure the ruler doesn’t slip while quilting

Black and white dashed lines that are visible on all fabric colors

Needle stops for quick repositioning as you quilt

Petunia is the perfect tool for creating curvy flower shapes, perfect circles and more.

You can quilt along the outside edge to create stunning floral shapes, or quilt along the inside edge for beautiful circles and arcs.

You can even combine the two to create even more designs for your quilt top!

Easy to read black and white markings are printed in 1in grids marked in 1/8in and 1/4in increments.

The 1/4in dashed lines that are printed on two adjoining sides, aid in trimming seam allowances.

A 45 degree diagonal line makes trimming half-square triangle blocks easy and accurate.

Easy to read black and white markings are printed in 1in grids marked in 1/8in and 1/4in increments.

Use the black numbers printed on white dots and the 1/4in grip sides to cut whole inches.

Use our exclusive Turn-a-Round feature to cut 1/2in increments by following the white numbers on black dots and 1/2in grip sides.