Best Plastic Rain Barrel Linking Kits in 2026

Outdoor rain collection water catchers are designed with large openings and a flat back that allows for easy installation

Spigots on the side of the barrel for connecting multiple rain catcher barrels together for the expansion of your rainwater storage capacity

Aluminum mesh screen keeps out debris to keep the water clear

A QUALITY SPIGOT DESIGNED FOR MAXIMUM WATER FLOW. Make use of the water collected from your rain barrel easily and quickly. This spigot was specifically designed with a larger flow port to fully take advantage of water pressure in your rain barrel to produce superior water flow. The 3/4" spigot is threaded for easy use with a hose- no need to haul buckets or watering cans.

NO LEAKS. The attached washer and silicone tape provide a perfect waterproof seal, and the bulkhead fitting and spigot are reverse-threaded, and self tighten- which ensures the spigot will not accidentally loosen from use, and will hold a tight seal over multiple seasons.

INSTALLATION SO QUICK, YOU'LL BARELY HAVE TIME TO GET YOUR DRILL OUT. The bulkhead fitting and spigot are reverse-threaded, and are tightened from the outside of the barrel- no need to fiddle inside with a wrench. Simply drill a hole, and thread the attached wire down through the hole then slide the bulkhead fitting down the wire as a guide- works well for barrels with and without open top design. The product also comes with a detailed, illustrated guide.

CREATE YOUR OWN RAIN BARREL – The EarthMinded rain barrel diverter kit includes all parts needed to easily make a rainwater collection system at your home, garage or outbuilding. A water collection system to convert a container into a rain barrel, RBK-0001

EASY TO INSTALL – This DIY rain barrel kit is designed to fit standard rectangular downspouts (2 x 3 and 3 x 4 inches). Straightforward and illustrated instructions makes installation as easy as 1-2-3. Please measure your gutter downspout before purchase (will not work with circular or square

EVERYTHING YOUR NEED – FlexiFit rain diverter, winter hole cover, 31-inch fill hose, rain barrel spigot, drain and cover, hole saw set, water seals and screw and instruction manual. All rain barrel parts included, except the rain barrel and tools

48 gallon

85% recycled

Charcoal color

【Premium Material】 The rain water barrel mesh cover is made of high-quality polyester material, which is durable, tear-resistant and has a fine mesh, It can effectively prevent small items from falling into the barrel.

【Drawstring Design】 Our mesh cover for rain barrels is designed with drawstring for easy use. You can also cover the barrel net on the small rain barrel and tighten the drawstring to prevent it from being blown away by strong winds in bad weather.

【Practical Rain Barrel Mesh Cover】 This netting screen can not only prevent fallen leaves and debris from falling into the rain barrel, but also prevent soiling of water sources, saving time for cleaning impurities in the water.

Does NOT fit opening of the IBC Tote

Fabricated in the USA

Never rust

This product is a rain barrel connector kit

Manufactured in the United states

Install Tubing and seal from outside of tank without the need for inside access

Collect and reuse the rain from your roof to water houseplants, gardens, and landscape, or wash cars

Diverts filtered rainwater into a storage tank or rain barrel or directly to a garden. Prevents clogs by filtering large or coarse debris.

Fits common 2-in. x 3-in. aluminum or vinyl downspouts. Made of durable white PVC plastic.

Useful bucket cover: you will receive 3 pieces water collection buckets covers, which are enough for your daily use, not only does the black mesh keep out the light, but also the fine mesh keeps leaves and trash from falling into the rain barrel, useful in the fall when there are more leaves

Suitable size: the mesh cover for rain barrel is 95 cm/ 37.4 inches in diameter, suitable for buckets up to 33.5 inches in diameter, you can also cover it on the small tables, small benches at your home, to prevent dust from falling on their surfaces

Durable material: this tank harvesting tool protector is made of durable polyester material, the mesh is close and thin, can well prevent small objects into the bucket, its material is also strong, not easy to be scratched or torn, you can use it for a long time, it collects clean water for you and can be placed on a water bucket all year round

❀ECO-FRIENDLY PRODUCT: Saving the water, saving the Earth. A sustainable solution to reuse the rainwater in your garden watering or etc. At the same time save your water bill! Based on calculation, this rain barrel can save your water bill up to 40% per year!

❀HIGH QUALITY MATERIALS: Our rain barrel is made from PVC frame and anti-corrosion PVC mesh fabric. It is designed for long-term usage even in the cold winter time. Unlike traditional barrels, this barrel is crack-free and more druable.

❀PREVENT LEAKAGE: Two rubber rings come with each spigot and water outflow valve. Install one ruber ring inside, the other one outside of the barrel can efficiently prevent leakage. Top mesh design keeps leaves, insects away from your clear water.

With the appearance of a traditional wooden barrel the slim-line design of the wood grain rain barrel makes it perfect for locations where a larger barrel would be intrusive.

The shallow depth and flat back allow for easy installation and placement under the downspout.

The corrosion resistant screen keeps out debris to keep the water clear while the safety rib in the top of the barrel keeps it child and pet safe.

Large 55 Gallon capacity

Sleek flat back square design fits naturally in any location around the home

High quality injection molded keeps it looking clean and new year after year

Recycling: This rain barrel is a popular choice for environmental protection enthusiasts. About 50 or 100 gallons of rainwater can be collected, and the collected rainwater can be reused for car washing, irrigation, etc.

Installation: The rain barrel is equipped with three outlet valves. Unlike older models, these three outlet valves are already fixed to the rain barrel and do not require manual installation. Just tighten the valve before use. (See installation instructions for details)

Material: Our rain barrels are made of PVC frame and anti-corrosion PVC mesh (upgraded fabric flexibility). 2 times longer service life than other products on the market, it can be used for a long time in cold winter.

53 Gallon Capacity, 27.5'' tall x 24'' wide. Portable, collapsible, quick no-hassle assembly and storage. Easy to transport

Built with the highest quality duty, 3-ply PVC material and super-tough zipper, UV-heat/cold-freeze resistant. Built to last outdoors

Pack list: high flow spigot, downspout spigot, overflow spout, leakproof washers, 6 sturdy legs/feet, super-tough barrel with filtered intake hole

Rain Water Collection Barrel: Enjoy the look of authentic ceramic and all the ease and durability of plastic; This beautiful rain collection barrel boasts a weather-resistant construction complete with a realistic pottery-like finish

Durable Design: Specially designed withstand harsh temperature changes, this rainwater collection barrel is made from roto-molded plastic that won't chip, crack, or fade

Convenient Features: This rain collector barrel comes equipped with a high-quality brass spigot, corrosion-proof screen, and bottom fitting connections which allow you to access water below the spigot

Large Capacity & Reusable: This barrel collects and holds approximately 132 gallons of rainwater from heavy rainfall and the collected rainwater can be reused to irrigate or clean your garden, lawn, patio, bath or farm

High-Quality Materials: Our rain barrels are made from 1000D Oxford fabric with a thickened PVC coating to prevent freezing/breakage in bad weather and last a long time; Minimum working temperature: -15°C

Prevent Leakage: Each faucet and outlet valve are equipped with two rubber rings. Placing the rubber rings on the inside and outside of the barrel can effectively prevent leakage

Minimal modification to your downspout

Keep using downspout regularly even if you move your rain barrel

3' flex tube and connection points

Allows you to connect 2 or more rain barrels through the overflow valve to give you increased capacity

Easy to assemble

Includes 12-inch piece of 1-inch clear hose and 2 clips

𝟏。𝐙𝐑𝐎𝐘𝐛𝐦𝐮 is an efficient rainwater harvesting system

𝟐. This product can collect and store rainwater for household use.

𝟑. Easily installable on your home's downspout, it allows you to collect and store rainwater efficiently.

Brass Rain Barrel Spigot Kit: Heavy duty 3.2 oz solid brass bulkhead fitting, 1/2" Female to 3/4" Male water tank connector bulkhead tank fitting. Heavy duty 3/4"water outlet no kink quarter turn solid brass ball valve can connect with garden hose. The brass bulkhead fitting is 1.52in, fit up to 0.78 inch thickness wall.

Rain Barrel Connector Kit: Overall length of the rain barrel connector hose is 12 inches, WADEO rain linking kit is designed for irrigation with rain barrel, not for potable water, not lead free compliant. Collect and conserve rain water, reduce your water bill and use environmentally friendly methods to water your plants and complete your outdoor chores.

Two installation methods: The brass bulkhead fitting of rain barrel spigot can front mounting and back mounting.

Package include:you will get 1 set rainwater collection system with 39 inch hose,1 waterproof plug and 2 screws.Our collection system is suitable for 2x3inch standard downspout.

Multi purpose:By installing our rainwater collection system, a large amount of rainwater will be transferred to the collection bucket(not included) through the downpipe for reuse. Such as watering flowers, vegetables, car washing, floor cleaning, etc.

Material:The rainwater collection system is made of high-quality PVC material, which is durable and UV resistant. It can be used for a long time, and can easily collect rainwater for reuse.the flow hose can be cut to a suitable length according to actual needs.

Complete rainwater collection solution kit:Rainwater diversion Collection System + rain bucket overflow preventi,+Rain barrel outlet valve and accessories kit, +rain barrel connection expansion kit

SIZE:Fits 2 "x 3" Standard Gutter Downspout, you'll also need 1-2 buckets, Unlimited size。

Our kit contains a rain diverter (Fits 2"x3" Standard Gutter Downspout), a rain barrel automatic float valve for Prevent Overflow, a hose for connecting the rain diverter and the float valve, anda pipe clamp for sealing. The outlet valve and bulkhead fittings for the rain barrel are included.The outlet valve contains 3/4 "female thread for direct discharge of water or can be used in connection with the pipe. The kit also includes a complete set of rain barrel connection expansion parts

Collects up to 80 gallons of rain water so you can save money and conserve water at home

Beauty doesn't negate function: it's made of durable roto molded plastic that doesn't chip, fade, or crack with time

Doubles as a decorative planter with a realistic brownstone pot look

💧EASY INSTALL: Use the Rain Barrel Downspout Diverter Kit to connect your downspout drain pipe to your rain barrel!

💧ENVIRONMENTALLY FRIENDLY: Rain barrels capture water from a roof for use on lawns, gardens or indoor plants!

💧HIGH QUALITY: This rainwater diverter kit is made with quality materials. Strong flex pipe stretches from 8" to 31".

Rain Water Catching System --- Rain barrel diverter kit is a great way to collect and reuse rainwater from your roof. Rainwater collection system divertes rainwater from the downspout to rain barrel (Not Included). You can use it to water house plants, gardens, landscape, grow vegetables or more.

Fit 2" x 3" Downspouts --- Rain Gutter Downspout diverter is designed to fit standard rectangular 2'' x 3'' downspouts, to collect rainwater from gutter or roof ( Note: For a better buying experience, please determine the actual size of your downspout before purchasing ).

Easy to install --- You need to cut the part of the downspout and then install the rain barrel diverter. By following the detailed installation steps shown, you can easily and quickly install the rain diverter. Plus, you can cut the hose to the actual length you need.

Solid Brass Bulkhead Fittings with 8 inch ¾” ID Hose

Rust Proof: Solid Brass Construction.

Leak Proof: Unique Grooved Flange, Gasket Stays in Place

INCREASE STORAGE CAPACITY: Maximize your storage threshold and grow your system easily by connecting additional rainwater tanks to a new or existing downspout diverter rain collection setup.

CONNECT YOUR SYSTEM: Our high flow hose has standard connections and is designed to link to any of our downpipe diverters and attach to any rain water collection barrel.

FRUSTRATION FREE: No need for extra tools, glue, or plumbing skills. All fittings are supplied, and we include a hole saw to create the opening in your water storage tank. Extend your rainwater collection system fast, with no fuss.

Practical: This rain barrel connector kit provides drip-free results and a secure seal for safety. It also comes with a 1 1/4 inch diameter hose that allows faster filling of your barrels.

Material: This connector kit is made of flexible PVC and metal that can adjust to any rain barrel setup. It can bend and extend from 6 inch to 31 inches with ease and strength.

Applicable: This rain barrel connector kit is made of high-quality materials that can withstand any weather conditions. You can use it for years to water your plants, enjoy outdoor activities, or beautify your home garden. It is compatible with any standard rain barrel that has a 3/4 inch spigot.

【High Quality Material】: Our bucket connection kits and fittings are made of quality plastic, durable and easy to replace, with threads to avoid kinking.

【Bucket Connection Kit】: Hose diameter: 25 mm, length: 50 cm. Suitable for connecting all standard water gun heads, practical and environmentally friendly, comes with seals, lock nuts and hose clamps for a strong connection and a significant increase in leak prevention.

【Easy Installation】: pre-drill the bucket holes, deburr, then mount the wall pipe on the bucket and connect the hose. For larger water supplies, the connection of the two nozzle heads is easy and simple, consisting of two hose fittings with locknuts.