Best Redcat Racing Rc Vehicle Body Clips in 2026

A high-speed jump sends your RC buggy airborne, only for the body shell to snag on a rock and pop loose because of a snapped plastic clip. This HobbyPark 100-pack eliminates that headache by providing a massive stockpile of spring steel R-clips that actually hold. These clips feature a flat-end design for a secure fit against mounting posts and wings, making them a reliable replacement for Traxxas, HPI, or Axial models. Measuring roughly 1.4mm in diameter and 26.5mm long, they offer the exact tension needed to keep your 1/10th scale shells locked down during aggressive bashing. Investing in this bulk set is a smart move for any hobbyist who wants to stop hunting for single replacements every time a clip gets lost in the dirt.

Hobbypark has engineered the ultimate bulk solution for RC enthusiasts who are tired of losing tiny hardware during intense trail runs or jumps. These spring steel clips are a massive upgrade over standard rigid pins because the clever bend design makes installing and removing your shell incredibly easy without the usual struggle. Whether you are running a Traxxas Slash, an Axial SCX10, or a Redcat Volcano, these 1.2mm diameter pins provide a secure fit for body posts, wings, and even battery holders. The springy tension ensures your body stays locked down during off-road action, yet they remain pliable enough for quick maintenance. Getting a 50-pack at this price point is a no-brainer for anyone building a serious crawler or buggy collection.

This Hobbypark hardware kit is an essential bulk replenishment for any 1/10 scale RC enthusiast looking to avoid mid-bash failures. Instead of hunting down individual replacements, this set provides a massive stockpile of 100 spring steel body clips, 100 foam washers, and 25 nylon washers. I found the variety particularly useful for maintaining tight, rattle-free body fits across different chassis types like the Slash or Rustler. While the nylon washers are specifically optimized for 1/10 scale models and might not fit larger 1/8 scale vehicles, the sheer volume of hardware included makes it a high-value investment for maintaining a fleet. It is a reliable way to ensure you always have a spare clip on hand when things get rough on the track.

Any RC enthusiast who has spent twenty minutes crawling through dirt searching for a lost body clip needs this kit immediately. The Du-Bro Body Klip Retainers solve the most annoying problem in remote control racing by ensuring your clips actually stay attached to your vehicle. By using small rubber attachments, these retainers keep your clips physically tethered to the body shell, meaning they won't just vanish during a high-speed run or a rough landing. Installation is incredibly straightforward. You just pop a small hole in your body, insert the retainer, and you are ready to race. This two-pack is a massive time-saver that eliminates the frustration of constant hardware hunting, especially since it comes with eight body clips to get you started right away.

Any RC enthusiast who has ever watched their custom paint job fly off mid-jump knows that these Traxxas body clips are an absolute necessity for your pit bag. These aren't just flimsy plastic bits. They are designed to securely fasten your vehicle bodies to the mounting posts, ensuring everything stays put during high-speed runs. Because this 12-piece pack is compatible with most 1/8 and 1/10 scale vehicles, it serves as a perfect universal backup for your collection. Losing a clip during a session can ruin a run, so having this pack on hand for under three dollars is a smart move for anyone serious about maintaining their scale models. They provide the reliability you need when the terrain gets rough.

HobbyPark’s 100-pack of springy R-pins is an essential stockpile for any serious RC enthusiast looking to avoid mid-run failures. These clips are manufactured from high-quality spring steel, providing the necessary tension to keep your shell securely fastened to mounting posts during aggressive driving. What sets these apart is the intentional slight bend in the design, which makes installation and removal significantly easier than traditional rigid pins. Whether you are running a 1/8 scale buggy or a 1/10 scale Traxxas truck, these versatile clips work perfectly for body posts, wings, and even battery holders. Buying them in this bulk quantity is a smart move that saves a lot of money while ensuring you never run out of replacements during a bash session.

These HobbyPark 90-degree angle springy pins are an essential upgrade for any RC enthusiast looking to ditch the frustration of traditional hardware. While standard clips can be a nightmare to manipulate during a quick battery swap or body adjustment, the offset design of these silver pins makes removal incredibly intuitive. I found them to be a perfect fit for my 1/8 scale rigs and Traxxas 1/10 models like the Slash or Rustler, securing everything from body posts to wings with ease. Since they are forged from quality spring steel, they maintain their tension even after repeated use. Getting a 20-pack in bulk is a massive win for anyone who constantly loses clips in the dirt or needs spares for multiple vehicles in their collection.

Why struggle with stubborn, straight clips when a simple change in geometry can save you so much time during a pit stop? These HobbyPark 90-degree angle body clips are a total game-changer for anyone running 1/10 scale model cars, trucks, or crawlers. The bent, springy design makes popping the body off significantly easier than the standard straight pins you usually find in a kit. Built from durable metal with a 1.2mm rod diameter and 6mm rings, they feel substantial enough to handle the rigors of off-road bashing. Getting a 20-pack for under seven dollars means you can replace every worn-out clip on your fleet without breaking the bank. It is a small, inexpensive upgrade that removes a major friction point in your hobby routine.

After weeks of use in the dirt and through heavy bashing sessions, I can confidently say that having a massive stockpile of reliable hardware is a total game-changer for any RC enthusiast. These Hobbypark body clips are crafted from high-quality 1.2mm spring steel, providing the tension needed to keep your shell securely fastened to the mounting posts during high-speed runs. The clever slightly bent R-pin design is a standout feature, making them much easier to install and remove compared to stiff, straight alternatives. Whether you are running a Traxxas Slash, an Axial SCX10, or a Team Associated buggy, these 1.2mm diameter clips fit perfectly. They are versatile enough for body posts, wings, and even battery holders, ensuring you never have to pause your session because of a lost or snapped clip.

Every serious RC enthusiast knows that losing a body clip mid-bash is a recipe for a broken shell and a ruined afternoon. These GuangTouL stainless steel clips are the essential insurance policy your pit bag needs, especially since they come in a massive 50-piece bulk pack. I found the slight bend in the design to be a game-changer. It makes snapping them onto body posts or battery holders significantly easier than stiffer, cheaper alternatives. At roughly 0.95 inches long with a 1.2mm diameter, they fit perfectly on a wide range of 1/8, 1/10, and 1/12 scale vehicles like Traxxas or Axial models. Because they are made of durable stainless steel, you don't have to worry about them snapping or rusting after a few muddy runs.

Most hobbyists struggle with stiff, frustrating body clips that snap or refuse to seat properly, but these KCRTEK pins solve that annoyance with a thoughtful 30-degree bend. I found the slight angle makes a massive difference when you are trying to quickly swap shells or secure a wing mid-session. They are crafted from zinc-plated spring steel, which provides the necessary tension to keep your 1/10 or 1/12 scale buggy shell locked tight against the mounting posts. While they might feel a bit thin if you attempt to use them on larger 1/5 or 1/8 scale vehicles, they are absolute perfection for standard racing setups. Having a bulk pack of 50 means you will never be stuck at the track with a lost or bent pin again.

You might wonder if a bulk pack of tiny steel clips is actually worth the investment, but having a massive stockpile of spares is a total game-changer for any RC enthusiast. These KCRTEK clips are made from zinc-plated steel and are designed to securely fasten your shell to the mounting posts. While they are optimized for 1/10 and 1/12 scale models like HPI or Axial, they can work with 1/8 and 1/5 scales, though you should keep in mind they are a bit thin for those larger vehicles. I really like that they have a slight bend to them, which makes them much easier to install or remove during quick battery swaps or body adjustments. At just under an inch long, they are the perfect reliable replacement for lost or broken hardware.

Most hobbyists struggle with flimsy, easily lost plastic clips that fail right when you need them most, but these Hosim stainless steel pins provide a much more reliable solution. I found that the slight bend in the metal design is a total game-changer for quick pit stops, making them incredibly easy to slide onto mounting posts or secure battery holders without a struggle. Since they are made from high-quality stainless steel, you don't have to worry about them snapping or rusting during intense sessions. This 50-pack is perfect for anyone running various scales like 1/12 or 1/24, ensuring you always have a spare on hand for wings and bodies. It turns a frustrating mechanical hiccup into a seamless part of your RC experience.

The slight, intentional bend in these metal clips makes a world of difference when you are working with tiny 1/24 or 1/36 scale micro cars. Instead of fighting with stiff, unyielding hardware, you can slide these into your mounting posts or battery holders with much less frustration. I found that they provide a surprisingly secure hold for micro bodies, ensuring everything stays fastened during rugged runs. Since they come in a bulk pack of 100, you won't be scrambling for a replacement every time one goes missing in the dirt. They are specifically sized for popular micro platforms like the SCX24, making them a reliable staple for any small-scale RC enthusiast's toolbox.

After weeks of use on my various 1/16 and 1/18 scale bashers, these HobbyPark spring steel clips have become an absolute essential in my pit bag. The 90-degree angle design is a genuine game-changer compared to those frustratingly stiff standard clips, making body removals and swaps significantly faster when you're in the middle of a session. Since they are crafted from quality spring steel, they maintain their tension even after repeated use on body posts, wings, or battery holders. Getting a 20-pack in silver means I am no longer hunting for a single missing pin every time I need to work on my car. They feel incredibly durable and provide a much more professional experience for anyone running Traxxas, Redcat, or WLtoys vehicles.

Hot Racing Red Bent Body Clips provide a high-visibility upgrade that replaces flimsy stock hardware with much tougher 1.2mm wire. These aren't just about looking good with that vibrant red finish. They are engineered as direct replacements, meaning you can swap them into your setup without hunting for extra mounting hardware. I found the 23mm length to be a versatile sweet spot for a massive range of platforms, from Losi LST trucks to Kyosho Inferno sedans and HPI Savage models. Whether you are running a nitro-powered monster truck or a precision nitro sedan, these clips offer the structural reliability needed to keep your body shell secure during aggressive driving sessions. It is a simple, effective way to bolster your RC chassis durability.

How many times have you struggled with stiff, stubborn pins while trying to secure your RC body mid-run? The GDOOL 30-pack of 90-degree angle body clips solves this common frustration by utilizing a clever bent-end design that makes removal significantly easier than standard straight pins. These clips are crafted from premium stainless steel, ensuring they won't snap or bend out of shape during heavy use on the track or trail. With a 1.2mm rod diameter and a compact 24.3mm length, they fit perfectly on 1/10 scale models and even some 1/12 scale vehicles. Whether you are securing a wing, a battery holder, or a main body shell, having a bulk supply of durable, springy pins ensures you are never left stranded with a loose chassis.

Losing your RC body clips mid-session is a frustrating waste of time that every hobbyist has experienced. The Apex RC Products lanyard retainer set eliminates this headache by providing a secure tether for your clips. This kit comes with two 100mm steel lanyards paired with sleek, anodized silver aluminum mounts that look professional on any chassis. Installation is incredibly straightforward, requiring only a single screw to get everything secured. Just make sure to measure the distance between your body posts before ordering to ensure the 100mm length fits your specific setup perfectly. It is a simple, low-cost upgrade that keeps your essential hardware exactly where it belongs.

Traditional body clips are the ultimate aesthetic killer for any high-end drift build. The Hobbypark Alloy Magnetic Stealth Invisible Body Post Mounts solve this problem by trading bulky plastic hardware for a streamlined, CNC-machined magnetic solution. After testing these, the precision of the alloy construction is immediately apparent, providing a much more secure and professional feel than standard mounts. This four-pack is incredibly versatile, fitting a wide range of chassis including Sakura S, Xray T3/T4, and various Redcat or HSP models. Because they are manufactured to be durable and high-quality, you aren't just getting a quick fix. You're upgrading the entire silhouette of your RC touring car. It is a small change that makes a massive impact on how your car looks on the track.

Losing your RC body shell mid-run is a frustrating nightmare that can lead to expensive chassis damage. These Drfeify metal clip pins solve that exact headache by providing a much more secure connection than standard plastic alternatives. I found the quality metal material to be impressively durable, standing up well to the vibrations and impacts common in 1/10 scale racing. The standout feature here is the integrated anti-lost wire function, which acts as a safety tether to ensure your shell stays tightly fitted to the car even during aggressive maneuvers. Whether you are running a Traxxas, Axial, or HSP model, these red clips add a reliable, high-visibility touch to your setup that keeps your gear intact.

Every DIY mechanic and car enthusiast needs this massive Griine fastener kit sitting in their garage to avoid the frustration of a loose bumper or rattling door panel. This isn't just a handful of clips. It is a comprehensive 915-piece ecosystem featuring 27 different sizes of heavy-duty nylon push rivets. I was impressed by the sheer variety, covering everything from engine covers to tailgate latches for major brands like Toyota, Ford, and Honda. The kit goes way beyond basic plastic pieces by including professional-grade tools like a metal fastener remover, four trim removal tools, and even specialized straps and sponge cushions. Everything stays organized in a sturdy storage box, making it a reliable, all-in-one solution for any automotive trim repair job.

A sudden snap of spring steel is the satisfying sound you'll hear every time you secure a fresh shell to your chassis. These KCRTEK clips are a lifesaver for anyone tired of losing tiny hardware in the dirt during a bash session. The 100-piece bulk pack ensures you always have spares for your 1/10 or 1/12 scale models, and the galvanized finish keeps them looking sharp. I particularly like the slight bend in the end design. It takes the frustration out of installation and removal, making it much easier to swap bodies or adjust battery holders. While they might feel a bit thin if you try to force them onto larger 1/5 or 1/8 scale vehicles, they are absolutely perfect for standard buggies and trucks looking for a secure, reliable fit.

HobbyPark Universal RC Car Body Clips solve the most frustrating part of shell maintenance with their integrated rubber pull tabs. Unlike the flimsy, standard cotter pins that come stock with most rigs, these clips are noticeably thicker and more durable, providing a much more secure hold for your 1/10 or 1/8 scale models. The real game-changer is the upgraded design. The rubber tabs make pushing and pulling the clips effortless, saving you time and fingernails during quick battery swaps or body adjustments. Whether you are running a Traxxas, Arrma, or Axial, these 1.4mm diameter pins offer a sturdy upgrade that prevents the dreaded loose shell mid-run. It is a simple, high-quality essential that makes managing your RC fleet significantly smoother.

The smallest components in your RC kit are often the ones that cause the most frustration during a bash session. These GoHobby silver body clips solve the common headache of fumbling with tiny metal pins by including dedicated pull tabs that make installation and removal a breeze. Designed with a 1.4mm rod diameter, they provide a secure, snug fit for a massive range of scales, including 1/8 and 1/10 models from brands like Traxxas, Arrma, and Axial. Whether you are swapping shells on a TRX4 or adjusting a Tamiya chassis, the durability of these pins ensures they won't snap under pressure. Having a 20-pack on hand means you are always prepared for a lost clip or a broken tab during intense trail runs.

Small hardware failures can ruin a high-speed run, making these GDOOL 90-degree body clips an essential, high-quality insurance policy for any miniature racer. I found that the 1mm diameter stainless steel construction provides exactly the kind of springy tension needed to keep shells secure without being a nightmare to swap out. The standout feature is definitely the bent-end design, which makes grabbing them much easier than standard straight pins when you are mid-tune. Whether you are securing a wing, a battery holder, or the main body post on a 1/16 or 1/18 scale crawler, these pins feel incredibly durable. With 30 pieces in a single pack, you are well-covered for everything from routine maintenance to replacing lost hardware during a rugged off-road session.

A bright flash of neon green or deep blue is the first thing you'll notice when you crack open this assortment box. These HOPLEX springy pins are a massive upgrade over the standard hardware that often comes with your rig, thanks to the clever 90-degree bend design. I found that this specific angle makes snapping the body onto the mounting posts significantly less frustrating during quick pit stops. They are crafted from a rugged steel that holds its tension well, so you aren't constantly fighting a clip that has lost its spring. Whether you are running a 1/10 scale crawler or a high-speed 1/8 truck, having 50 color-coded clips on hand ensures you'll never be stuck mid-bash with a loose body shell.

GoHobby's silver body clips are a fundamental upgrade for any RC enthusiast looking to secure their shell with professional-grade reliability. After testing these across various scales, the 1.2mm rod diameter proves to be the sweet spot for a wide range of brands like Arrma, Axial, and Tamiya. What sets this 20-pack apart is the inclusion of separate pull tabs, which makes swapping bodies during a bash session significantly faster and less frustrating. The clips themselves feel durable and provide a rock-solid connection to the body posts, preventing that dreaded shell wobble during high-speed runs. Whether you are running a 1/10 scale crawler or a smaller 1/14 bash truck, these pins offer the stability needed to keep your investment intact.

Why settle for boring, stock hardware when you can customize your entire RC fleet for less than ten dollars? This Nuofany kit is a total game-changer for anyone running 1/8, 1/10, or 1/12 scale models like Traxxas or Axial. The steel construction feels incredibly sturdy, providing a secure hold on your body shells that won't fail during high-speed runs. I particularly like the bend design, which makes swapping out shells much less of a headache than traditional clips. With 180 pieces spread across six vibrant colors like gold, blue, and red, you can finally match your hardware to your car's livery. It is a massive, cost-effective upgrade that keeps your buggy or truck looking sharp and staying tightly mounted.

Losing or snapping tiny body clips during a high-speed bash can sideline your RC rig instantly. These AllinRC stainless steel clips solve that headache by providing a massive 50-piece stockpile that ensures you are never stuck in the pits. I found the 1mm diameter rods to be incredibly sturdy, and the bend-end design makes snapping them into your 1/16 or 1/18 scale chassis surprisingly effortless. Since they come with separate pull tabs, you can customize your setup for easier access during quick battery swaps or shell changes. Whether you are running a Traxxas, Axial, or Tamiya, these corrosion-resistant pins offer the durability needed to handle the grit and grime of off-road crawling and drifting.

V GEBY Car Body Shell Clip Pins deliver high-hardness metal durability that keeps your 1/10 scale RC models locked in place. I found that these red clips offer a much more secure fit than standard plastic alternatives, which is vital when you are hitting jumps or navigating rough terrain. The design allows for a slight bend, making the installation and removal process surprisingly smooth even when you are in a rush at the track. They are engineered to prevent the body from coming loose mid-run, ensuring a tight fit against the mounting posts. Whether you are running a Traxxas, Axial, or HSP, these solid metal clips serve as an essential, reliable upgrade for any remote control enthusiast looking to avoid losing their shell during a bash session.