Best Kaka Industrial Rebar Benders in 2026

6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. Bending Angle: 0-180°, Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Item Dimensions(L x W x H): 17.72'' x 19.69 x 20.08'' / 45 x 50 x 51 cm.

1700W Pure Copper Coil Motor: This hydraulic bending machine features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A).

Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally.

Super-Fast Cutting Speed: The electric hydraulic rebar cutter cuts rebar within 3-5.5 seconds without sparks and sentiments. Cutting capacity ranges from 3/20" (4 mm) #3 to 1" (25 mm) #8 Grade 60. It satisfies your various cutting demand. Cut rebar types: medium carbon rebar, low carbon rebar, round rebar, screw thread steel, etc.

Pure Copper Coil Motor: 1700W pure copper coils motor, driven by a hydraulic pump to ensure that the electric rebar cutter has higher reliability and excellent motivation yet low noise. The motor runs more smoothly to achieve a minimum friction and power consumption.

High-quality Steel Blade: We utilize upgraded steel blades that would not deform easily and serve you longer with sophisticated blade processing technology and strict quality control. And multiple screw fixed head offers quick and accurate cutting while providing additional stability and sealability.

Super-Fast Cutting Speed: The electric hydraulic rebar cutter cuts rebar within 3.5-4.5 seconds without sparks and sentiments. Cutting capacity ranges from 3/20" (4 mm) #3 to 7/8" ( 22 mm) #7 Grade 60. It satisfies your various cutting demand. Cut rebar types: medium carbon rebar, low carbon rebar, round rebar, screw thread steel, etc.

Pure Copper Coil Motor: 1350W pure copper coils motor, driven by a hydraulic pump to ensure that the electric rebar cutter has higher reliability and excellent motivation yet low noise. The motor runs more smoothly to achieve a minimum friction and power consumption.

High-quality Steel Blade: We utilize upgraded steel blades that would not deform easily and serve you longer with sophisticated blade processing technology and strict quality control. And multiple screw fixed head offers quick and accurate cutting while providing additional stability and sealability.

Pure Copper Motor: A pure copper motor ensures higher reliability and excellent motivation yet low noise. Moreover, it is more durable with less power consumption and low noise to extend the service life.

Excellent Performance: This portable rebar bender bending rebar up to 5/8'' (#5) grade 60 from 0-130 degrees within 5 seconds. It satisfies your various bending demand and raises your working efficiency significantly.

Solid Machine Body: Study and durable machine body and head can stand super-hard rebar with strong clamping force, which can help to reduce the waste of steel rebar. Multiple screws fixed on the head enforce the security.

Super-Fast Cutting Speed: The electric hydraulic rebar cutter cuts rebar within 3.0-3.5 seconds without sparks and sentiments. Cutting capacity ranges from 3/20" (4 mm) #3 to 3/4" (20 mm) #6. It satisfies your various cutting demand. Cut rebar types: medium carbon rebar, low carbon rebar, round rebar, screw thread steel, etc.

Pure Copper Coil Motor: 1250W pure copper coils motor, driven by a hydraulic pump to ensure that the electric rebar cutter has higher reliability and excellent motivation yet low noise. The motor runs more smoothly to achieve a minimum friction and power consumption.

High-quality Steel Blade: We utilize upgraded steel blades that would not deform easily and serve you longer with sophisticated blade processing technology and strict quality control. And multiple screw fixed head offers quick and accurate cutting while providing additional stability and sealability.

Sturdy & Durable: Cr12MoV steel material, high solidity, blade edge won't curve and it won't deform easily, sturdy and durable enough.Set of 12 replacement cutter jaw blades

Excellent Performance: Blade edge is super sharp, which cut rebar in a very short time,Accurate size: 26mm x 20mm x 10mm.

Easy Replacement: Just taking down screws, then taking out old blades, replacing with the new one, simple and flexible to operate.

High-Performance Motor: This electric rebar cutter features a pure copper coils motor, which can offer ultra-strong motivation and excellent performance. Voltage: 110V, 60Hz. Power: 900W.

Super-Fast Cutting Speed: The hydraulic rebar cutter can cut rebar within 2.5-3.0 seconds without sparks, sentiments, and smell. Min. Rebar (4mm) #3, Max. Rebar (16mm) #5.

Solid Construction: Four-sided reversible cutter jaws made of high-quality metal and multiple screw fixed head can provide double stability and sealability when cutting.

16 T Pipe Bender: Our tube bender holds up to 16 ton weight capacity. It can deal with heavy-duty works because of its superior steel material. And the four feet design ensures operation stability.

1/2"-3" Bending Range: The hydraulic pipe bender comes with eight dies of 1/2", 3/4", 1",1-1/12", 1-1/4", 2", 2-1/2" and 3", available to meet your accurate uses. All these are made of high-quality reinforced cast iron for durable use.

90° -180° Bending Angle: This exhaust tubing bender allows tubes to be bent within 90-180 degrees, reducing your workload and increasing working efficiency (no more than 180 degrees).

Integral Hydraulic Cutter 7/8": It is a manual integral hydraulic rebar cutter, through the pump to generate pressure, to cut rebar, easy to operate. Max. Cutting Diameter: 7/8". This tool is suitable only for Rebar.

Durable Construction: The cutting head of this rebar cutting tool is made of high strength forged steel with high hardness. The rebar cutter blades have been through special heat treatment, having a good expansion ability.

Thickened Cylinder 13 Ton: It is a manual integral hydraulic cutter tool, through a 13 tons cylinder to generate pressure, with good tightness and no oil leakage, to generate pressure, to produce large force for rebar cutting. The one-person operation, save your time and energy.

High-Performance Motor: This electric rebar cutter features a pure copper coils motor, which can offer ultra-strong motivation and excellent performance. Voltage: 110V, 60Hz. Power: 900W.

Super-Fast Cutting Speed: The hydraulic rebar cutter can cut rebar within 2.5-3.0 seconds without sparks, sentiments, and smell. Min. Rebar (4mm) #3, Max. Rebar (16mm) #5.

Solid Construction: Four-sided reversible cutter jaws made of high-quality metal and multiple screw fixed head can provide double stability and sealability when cutting.

1.2" Bending Capacity: Our metal machine is designed to bend square steel, flat steel, round steel as well as angle steel. The bending size range is 0.3"-1.2"/8-30 mm, max bending size is 1.2 inches. A wide range of sizes meets your most tubes or stocks bending.

120° Bending Angle: This bender comes with a dial for more precise bending, with a bending angle up to 120-degree. The different degree ensure accuracy and meet your various work requirement.

Hot & Cold Bending: In terms of hot bending, it can bend flat steel 4" x 0.59", round steel 1.2" , square steel 1.2" x 1.2", angle steel 1.2"x 0.5". As for cold bending, it can bend flat steel 4" x 0.59", round steel 0.7", square steel 0.6" x 0.6" and angle steel 2.4" x 0.3".