Best Epever Renewable Energy Controllers in 2026

12/24VDC automatically identifying system voltage, 150V Max. PV Open Circuit Voltage. Die-cast aluminum design, ensuring excellent heat dissipation characteristic.

Advanced MPPT (maximum power point tracking) technology, tracking efficiency no less than 99.5%, maximum conversion efficiency of 98%.

Support 4 charging options: Sealed, Gel, Flooded and User.

(2022 Upgraded version )EPEVER 40A MPPT Solar Charge Controller + MT50 Remote Meter + Temp Sensor Cable RTS300R47K3.81A . 40Amp Controller 12V/24V Auto Work , Max. PV input power:520W @12V battery or 1040W @24V battery. Max PV 100V. Common Negative grounding , Compatible with lead-acid and lithium-ion type batteries. More details watch video Tutorials .

40Amp MPPT Charge Controller Tracking efficiency : ≥99.5%, Max. conversion efficiency 98% ,12V/24V Automatic Work System Voltage Recognition Auto-saving function: two voltage disconnect levels ,Charging power and current limitation function.

Support Lead-acid: Sealed (default)/ Gel/ AGM/ Flooded / User (9～17V@12V; 18～34V@ 24V) & Lithium: LiFePO4 (4s/12V; 8s/24V), Li (NiCoMn)O2 (3s/12V; 6s/24V), User (9～34V) & User-defined.Battery temperature compensation function（only for Lead-acid battery) , Overheating power reduction function

Tracer AN series MPPT Charge Controller: 12V/24V/36V/48V Auto identifying system volt. Auto control system to limit the charging power & current go over the rated value.

100 amp Charge Controller Max Input Solar Panel Power: 1250W/12V, 2500W/24V, 3750W/36V, 5000W/48V. Max input Voltage: 150V. Real-time energy recording and statistical.

100A Solar Controller MPPT support for 4 type Battery charging: Litium, Lead-acid (Sealed, AGM, Gel, Flooded) and User. Battery temperature compensation function to ensure the controller’s life.

Max Input Current: 60 amp; Rate Input Solar Power: 780W(12V); 1560W(24V); 2340W(36V); 3120W(48V)(The maximum input power must not exceed 1.5 times the rated power ); Max input Voltage: 150V; Auto control system to limit the charging power & current go over the rated value.Common NEGATIVE Ground and TROUBLESHOOTING function( fault LED indicator).

60A Mppt Charge Controller support for 4 type Battery charging : Litium, Lead-acid (Sealed, AGM, Gel, Flooded) and User (user couldn’t set Lithium). Battery temperature compensation function to ensure the controller’s life.(The PV input voltage must be at least 2V greater than the battery voltage to charge )

RS-485 communication bus interface and Modbus communication protocol, available to meet various communication requirements in different situations.

☀MPPT Solar Controller 40A: Tracer4210AN 12V/24V Auto, Max PV Input 100V and Max.PV input power: 520W in 12V battery system, 1040W in 24V battery system. Note: Be sure to connect the battery first, pay attention to the positive and negative wiring.

☀Tracer4210AN support 4 battery charging: Lead-acid (Sealed, AGM, Gel, Flooded), User and Lithium). Common negative grounding design. Temp Sensor Cable (RTS300R47K3.81A) test battery temperature and the battery temperature compensation function (only for Lead-acid battery) to ensure the controller’s life. It protect the battery from being over-charged by the solar modules and over-discharged by the loads.

☀ Remote meter MT50: Compatible with EPever Tracer-AN/BN, LS-B/BP, VS-BN series controllers. MT50 can be directly connected to the controller and automatic identify the controller, and display the type, model and relevant parameter data. If you need MT50 connection and operation video, please email us.

EPever MPPT Solar Charge Controller 30A , 12V/24V Auto , Max PV 100V , Common Negative Grounding ,Max PV input power 390W/12V ,780W/24V. Tracer-AN MPPT controller is upgrade version then Tacer-A series , Better funcations and advanced technology .Support Gel Flooded Sealed batteries and Lithium Batteries too .

Advanced MPPT technology, with efficiency no less than 99.5% ,Ultra-fast tracking speed and guaranteed tracking efficiency,Advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time ; Wide MPP operating voltage range,High quality components, perfecting system performance, with maximum conversion efficiency of 98%,Accurate recognition and tracking of multiple-peaks maximum power point ;

International famous brands of ST and IR's components of high quality and low failure rate are used, which can ensure the product's service life ,Charging power and current limitation function,

❶EPEVER TRIRON N series 40a mppt controller, an update series of Tracer A/ANSeries, can be integrated with different display and interface modules to meet a variety of functional requirements. Can automatically identify and load the drivers of various modules.

❷Negative groud designed solar charge controller of this 40a modual mppt controller can be widely used for different applications, e.g., communication base stations, household systems, street lighting systems and field monitoring, RV solar system etc.

❸7 battery type charge parameter pre-set controller, select: Sealed(AGM), Gel, Flooded, Lead-acid User, LiFePO4 Lithium, Li(NiCoMn)O2 Lithium, Lithium User(9~34V). Dual 5V DC USB output interface of this mppt controller can charge your electronic devices directly.

Compatible with PC soft eLOG01 ware & MT50 for real-time monitoring

Connect to PC via USB interfaces with high compatibility

Powered up by controller communication interface

2018 New Released TracerAN 40A MPPT Solar Charge Controller Using innovative MPPT technology with high tracking efficiency up to 99%, the charge controller efficiently charges your off-grid solar battery bank safely day in, day out.

New Added Features: 1. Blacklight Display 2.Common Negative Ground 3. Compatible with lithium-ion Batteries. Configurable with multiple battery types (Gel, Sealed, Flooded and Lithium), auto-detects between 12v and 24v system designs, multifaceted safety systems to prevent short circuits, overloading, overheating and polarity issues.

3 stage charging for maximum battery life with intelligent power saving and temperature compensation and operates on multiple load control modes such as manual, light ON/OFF and On+Timer.