Best Right Rv Furniture Parts Hardware in 2026

Surface mounted pedestal base.

Made of aluminum.

Chrome plated.

Size: 5.75"H x 2.81"W x 4"D (4 Pack)

Rubber Caps Provide Tight Seal

Material: Aluminum

Are you short on space but still need a table? Do you wish there were a quick way to set up a table when you park your RV? With a table support trim, you can do just that. Our aluminum table support trim is just what you need to attach your table while saving you space and time.

This trim comes with two pieces: one piece to attach to your table and one to attach to your RV. The piece attached to your RV locks and catches the piece attached to the side of your table for easy setup.

Because this trim is made of aluminum, it won’t rust. This means you can use it indoor or outdoor, rain or shine. You probably won’t want to sit outside if it’s raining, but your trim certainly can. For extra rust protection, use #8 gauge stainless steel screws to attach the trim.

The water running off of the roof can cause black streaks to run down the side and create pools of water all around the RV. No one likes stepping in a puddle first thing in the morning. Drip rails are designed to get rid of these problems. They channel the water out the sides so that it doesn’t create those dirty streaks and they move the water to one, out of the way, location.

Made locally of powder-coated aluminum, this drip rail is set to keep your RV looking great for a long time. You won’t have to worry about rust on your trim since aluminum, along with being flexible enough to fold around the curves, is rust-resistant. No more worrying if you’ll have to fix this trim when you take your RV out for the season.

The appearance of your RV is important and not just in the inside. You want to make your RV reflect your personal style and with the polished Arctic White or black finish, you can mix and match with any color or style and it will always look great. With the slot for the vinyl insert, you won’t even have to see the screws holding it on. All you have to do is enjoy the experience.

Perfect for 5’ wide teardrop trailers, these hurricane hinges act as a leak-proof hinge for the rear galley lid doors. This water-tight quality is very important for your galley, helping to make sure that your belongings and anything else inside stay dry during the rain

Made of aluminum, these hinges are not only meant to protect your belongings but are also meant to protect themselves. If your hinges rust, it could mean contaminating anything inside the galley as well as damaging the trim and having a poor aesthetic appeal. You have no need to worry about these problems with the durable, rust-resistant aluminum.

Even though you may not see these hinges a lot, you still want them to look good. With the mill finish, they give you that factory look and the neutral color also lets the trim blend in with any exterior style.

It is easy to disassemble and assemble, easy to store, and saves space in the RV bathroom bedroom

The installation is simple, does not require complicated operations and tools, convenient for using.

Made of aluminum alloy, oxidized surface, corrosion‑resistant and oxidation‑resistant, lightweight and durable.

DESIGN: The SurFit Leg system is ITC's most economical Patented table leg solution. This non - mechanical locking system includes a fixed steel leg with capped ends, the table base and floor base are both powder coated aluminum alloy. The Floor base attaches with the included 6 screws and the Table base attaches to your table with 6 screws that you supply to meet your tables requirement.

EASY INSTALL: Attach Table Base to the underside of your table with 6 screws that you supply to fit your table, install the Floor Base with provided screws (CAUTION: It is the responsibility of the installer to ensure the provided screws are the correct depth/size needed. Screws have not been tested on every style Boat, RV or Deck), slide leg into base and press to secure. If a recessed hole is already present, shop our Recessed SurFit Legs. DO NOT use a surface mount base over a recessed hole.

APPLICATIONS: A single SurFit is perfect for smaller tables in an RV, Boat, Pontoon, Camper OR you can use it on your Deck or Dock - simply screw the base to your floor boards and you have a handy companion surface for grilling or a bar for an enjoyable outdoor cocktail party. This dinette table leg can also be used in a set of two for larger sized table tops.

【100% No-risk Purchase】If you receive any problems with our products, you can get a full refund or a new one for free! Please feel free to contact us if you have questions during use. We will give you a satisfactory answer within 12 hours. Customer satisfaction is our tireless pursuit.

【Space Saving】Adjustable RV table legs can solve the trouble of table placement, it is very convenient to disassemble and store, does not take up space, and allows you to freely design the space. The RV table leg will be a great companion for your maximum convenience.

【Easy to Install】The removable table leg does not require complicated tools and operations. Our products have detailed user's manual, detailing every step of the installation, to solve your installation troubles and let you enjoy the convenience it brings to you faster.

Securely holds your trailer broom in place during storage and travel

Designed for installation on garage walls and inside enclosed trailers, such as race trailers

Minimalist design keeps the broom tight against the wall, taking up as little space inside the trailer as possible

✔️Proudly engineered and manufactured in the USA!

✔️ The most versatile unit available! Holds up to 9 aerosol cans on the top shelf, 10 quarts of oil on the middle shelf, and a variety of gallon jugs on the bottom shelf

✔️Dimensions L x W x H Inches =25 x 9 x 38 inches

Wide Adjustable Range: Our RV Screen Door Cross Bar Handle offers an impressive adjustability range, fitting doors between 21.5 and 32 inches in width. Helps protect screen door from wear and tear, makes opening and closing more convenient.

Easy Installation: Our handle grab bar is designed for effortless installation, allowing users to set it up within minutes. All required stainless steel screws and instructions are included.

Robust and Durable Materials: Our RV Screen Door Bar features high-strength zinc alloy bases on both sides, providing superior durability and sturdiness compared to plastic bases. The telescoping rod is made of aluminum, and the central grip is crafted from high-quality plastic.

【Compatible with】 Boat, Yacht, RV, Motorhome, Caravan , etc.

【Size】Top base diameter: 7"/174mm; Bottom base diameter: 7"/175mm; Maximum height: 27"/690mm; Minimum height: 17.7"/450mm.

【High Quality material】The table pedestal stand is made of high-quality aluminum material, which is not easy to rust and corrosion resistance, high stability, sturdiness and durability. It has been tested many times before sale and has a long service life.

Type B I-Beam Track

Special end stop required (art number 81835)

Total Length: 96"

DESIGN: The SurFit Leg system is ITC's most economical Patented table leg solution. This non - mechanical locking system includes a fixed steel leg with capped ends, the table base and floor base both powder coated aluminum alloy for the silver option and high-performance polymer for the black option. The Floor base attaches with the included screws and the Table base attaches to your table with 6 screws that you supply to meet your tables requirement.

EASY INSTALL: Easy pressure fit assembly. Attach Table Base to the underside of your table with 6 screws that you supply to fit your table, install recessed base w/ screws provided (CAUTION: It is the responsibility of the installer to ensure the provided screws are the correct depth/size needed. Screws have not been tested on every style Boat, RV or Deck), slide leg into base, press in for a secure fit. If you don’t have a recessed hole, cut a 2.5" hole, or shop our SurFit Surface Mount legs.

APPLICATIONS: Using two SurFit legs is perfect for larger tables in an RV, Boat, Pontoon, Camper OR you can use them on your Deck or Dock - simply screw the base to your floor boards and you have a handy companion surface for grilling or a bar for an enjoyable outdoor cocktail party. This dinette table leg also comes in a single pack to be used for smaller sized table tops.

REPLACEMENT STAND-OFF TUBE FOR RECPRO EXTERNAL RV LADDERS - This replacement stand-off tube is perfect for your RecPro external RV ladder. It holds the ladder off of the side of your RV, making it easier to access. Made from heavy-duty aluminum metal, it's available in Silver or Black to match your ladder.

HEAVY-DUTY ALUMINUM METAL - This replacement stand-off tube is made from heavy-duty aluminum metal, ensuring that it will last for years. It's also available in Silver or Black to match your RecPro external RV ladder.

EASY TO INSTALL - Replacing your old stand-off tube is easy and takes only a few minutes and very little effort.

【ADJUSTABLE HEIGHT】The rv table legs have stepless adjustable height within a limited range, the shortest height is 490mm/19.3in, and the longest height is 720mm/28.3in. At the same time, the aluminium alloy folding table leg bracket is suitable for large vehicles such as rv, motorhomes, and yachts.

【DETACHABLE】The adjustable legs for table have flat bottom, detachable design. Therefore, when the table is not needed, the table legs can be rotated and removed to increase the activity space.

【DESIGN】The installation interface of the upper base is equipped with a safety stop device to avoid being too tight to be removed. And, the fine surface treatment makes the appearance more fashionable and can be combined with various indoor styles.