Best Sailing Rigging Turnbuckles in 2026

Breaking Load 3,500 kg (7,700 lb)

L2 - 11" - 280 mm

L1 - 7.5" - 190 mm

LONG-LASTING - Our turnbuckle uses hot dipped galvanization to protect the steel from humidity, corrosion, and other elements. No other kind of protective coating can give this much longeviy to steel, so you’re sure to use our turnbuckle for years!

SAFETY TESTED - Safety is our top priority. All of our products, including this galvanized steel turnbuckle, have passed EN71 test, CE and RoHS safety tests.

COMES WITH NUTS AND BOLTS - This jaw and jaw turnbuckle comes with nuts and bolts that are made of the same durable hot tipped galvanized steel.

【Package Includes】 -- 2 x M6 Jaw and Jaw Turnbuckle. Total Length: 160mm/6.3"". Breaking Load: 3050lbs.

【Premium Material】-- Turnbuckle is made of premium stainless steel, highly resistant to oxidation, rust free and wear resistant.

【Function】 -- Each end has open jaw with pin and safety wire for easy,secure connections. For fastening and binding rope. Simply take out the clevis pin from the rigging screw fork by removing the split ring.

Stainless Steel 316 Marine Grade

Breaking Load 7600lbs.

Corrosion and rust resistant- for long service life

Made of stainless steel, durable and anit-rust, work with magnetic.

Suitable for tighten rope, fit for sun shade, tent and various rope fixing application.

M6 type, one of the most common type of turnbuckle.

【2 Pack Adjustable Turnbuckles】The jaw and jaw turnbuckles are forged with hot dipped galvanized steel, adjustable from 13 inches to 19 inches, tension is created by tightening the turnbuckle, working load limit of 2200lbs. You can adjust the length as needed.

【Durable Material】The jaw and jaw turnbuckles are forged with hot dipped galvanized steel, which performs superior in corrosion and rust resistance, durability, and strength, applicable for both indoor and outdoor uses, so you’re sure to use our turnbuckle for years.

【Multi-Application】Turnbuckle tensioner can be used to shrink and tension rope easy to use and widely applied, fit for steel wire, antenna, clothesline, sun shade installation, chain and other rope.

Polished Finish AISI 316 Marine Grade A4 Stainless Steel Closed Body Rigging Screws with a Jaw and Jaw or Fork and Fork, superior rust resistance.

For fastening and binding rope. Simply take out the Clevis Pin from The Rigging Screw Fork by removing the Split Ring.

Perfect equipment for adjusting tension on ropes, cables and lines.

250 feet of 1/8” galvanized cable, 7 strand cable constructed 1700 pound breaking strength

6 standard turnbuckles(see picture number 2 for the type of turnbuckle you will receive), 6 eye bolts 5” (bolts mount directly to the end frame sections and are attachment points for the turnbuckles), 6 eye bolts 8” (used to support the cable on the middle section or sections) (the extra length creates a gap between the frame and the net, preventing ball deflection directly off the frame)

12 cable clamps 1/8”

【2 Pack Adjustable Turnbuckles】The 2pcs jaw and jaw turnbuckles (M12) are adjustable from 13 inches to 19 inches, tension is created by tightening the turnbuckle, working load limit of 2200lbs（1000Kg）. You can adjust the length as needed.

【Durable Material】The jaw and jaw turnbuckles are forged with hot dipped galvanized steel, which performs superior in corrosion and rust resistance, durability, and strength, applicable for both indoor and outdoor uses, so you’re sure to use our turnbuckle for years.

【Multi-Application】The turnbuckle tensioner can be used to shrink and tension rope or wire easy to use and widely applied, fit for steel cables, marine, tie rods,antenna,clothesline, sun shade installation, industry,chain and other rope.

Stainless Steel 316 Marine Grade

Breaking Load 1430lbs

Corrosion and rust resistant- for long service life

The stainless steel turnbuckle suitable for tighten tant rope,and regulate the elastic effect

Turnbuckle material:304 stainless steel,marine grade,non-rust

M10 turnbuckle total length :220mm,body length:125mm

New Stainless Steel Open Body Turnbuckle 1/4"

Rigging screw closed body turnbuckle suitable for tighten tant rope,and regulate the elastic effect

stainless steel 316 commercial marine Grade,smooth without burrs, high hardness, non-defrmation, durable, wear-resisting, anti-rust, anti-corrosion, can be used indoor, outdoor or even in humid environment, can be used for a long time in the saltwater environment

M5 turnbuckle total length :140mm,body length:80mm

Replacement threaded turnbuckle with hook for standard turnbuckle

Available sizes: 24" threaded turnbuckle hook (21" - 33.5" reach) or 11" threaded turnbuckle hook (15" - 22" reach)

Fully adjustable

Jaw ends allow for easy yet secure connections.

Strong design allows a minimum breaking load, or working load limit, of 3100lbs. Safe working load depends on application, and even orientation of the shackle under load.

Open body style for frequent and easy inspections.

Closed Body Rigging Screws with a Jaw and Jaw or Fork and Fork, rust resistance.

Each end has with pin and for easy, secure connections.

For fastening and binding rope. Simply take out the Clevis Pin from The Rigging Screw Fork by removing the Split .

Made of 304 Stainless Steel,durable,hight quality and waterproof

Available Size: M5/M6/M8/M10/M12/M14/M16

Each end has open jaw with pin and safety wire for easy, secure connections.

Dimensions: M8

1. 304 Stainless Steel, durable and anti-rust

2. M3, Fit 1/8 inch wire rope. turnbuckles type: M6, Max length 8.5 inch, Min length 5.7 inch